electrical impact wrench 1/2 450NM

1/2" Electrical impact wrench. Power 1100W, 450 Nm.

set of Sockets 17 mm, 19 mm, 21 mm, 22 mm, toitejuhtme length 4 meters. all on käepärases case.

Eesmärk/application

impact wrench on common electrical instrument, isolatsiooniklass II, which is intended for nuts and bolts lõdvendamiseks and to tighten. due to elektritoiteallikale is not wrench for use needed pneumaatilist System.

Kuidas to use

tools correct, reliable and safe use depends real use.

Wrench Delivered komplekteerituna neither needed kokkupanekut.

Pistikuvõtmed on with a key contains.

• before bolt or nut pesavõtmega sissekeeramist Turn bolt or nut by hand for thread (at least two rotations)
• be sure that, et open twisting or pingutatava element . on wrench dimensions correctly chosen. Suuruste wrong choice may cause nii wrench and also nut or bolt breakage
• push plug wrench nut or bolt head peale
• push lülitit and keep it desired pöörlemissuunale vastavas position
• pingutamisel push and keep lülitit position F and open keerates position R
• tensioning korral lülitub after max torque saavutamist ülekoormussidur and driver drive lülitub out. then vabastage switch and wait, up to engine rotation speed fully seiskub
• extracting korral Check, kas fastening torque, millega nut pingutati, doesn't exceed wrench maximum pöördemomenti. Sel juhul haakub also ülekoormussidur and mutrit no pruugi to be possible unscrew
• after It's open keeramist vabastage Device switch pressure and wait, up to engine rotation speed fully seiskub
• after work completion ühendage tool AC power open and alustage hooldust

Packing content

• Electrical impact wrench Sthor
• löögipesad 17 mm, 19 mm, 21 mm, 22 mm
• 4 meter Power Cord
• practical case