soldering iron 40W STHOR

Traditsioonilises korpuses soldering iron Sthor 79366 , which has straight AC power toidetav takistussoojendi. Disaini lihtsus Changes Device peaaegu rikkevabaks and kui head on properly hooldatud, Works soldering iron much aastaid. Küttekeha Power enough two vaskjuhtme or põhielektroonika For proper jootmiseks, by using go-through hole kokkupaneku technology.

• Input: 230V
• küttekeha Power: 40W
• end hole depth: approximately 50 mm
• maximum end diameter: 4,8 mm

Jootekolvi mounting kinnitatud end dimensions:

• length: approximately 70 mm
• diameter: 4,8 mm
• end end diameter: 1,5 mm

other dimesions:

• Overall Length bended with cable: 230 mm
• handle's length: ca 120 mm
• toitejuhtme length: 140 cm

soldering iron requires 3–4 minutes, et kuumeneda up to a temperature 350 °C .

Kuidas oma suurpurje eest hoolitseda

Sthor jootekolbide endings on coated materials, which piirab end oxidation. long term kuumutamine and mechanical kahjustused rikuvad kaitsekihti järk-järgult, then ending oksüdeerub quickly, which as result on probleeme soldering sideaine sulamisega. It's asemel, et melt and end mounting kinni to stay, kerkib tin pallid up and kukub off. Tõestatud five end eest hoolitsemiseks on It's tinatamine. Jootekolbi esmakordsel kuumutamisel Apply It's end end little bit tin and remove It's ülejääk, for example messingilaastudega. Tekkiv tinakiht protects oxidation eest. good common on tin end each kord after work completion.

attention

straight pistikupesast toidetavatel jootekolbidel must be maandustihvtiga plug and these peaksid saama toidet with ground pistikupesast. Kerise metallkorpuse mittemaandamisel on oht saada elektrilöögi, which parimal juhul põhjustab põletushaavu. in all Sthor jootekolbidel on with ground plug, which is connected kerise steel body.