tec 2000 fuel injector cleaner petrol injection cleaner 375ml

TEC 2000 fuel injector cleaner is an effective injector cleaner for petrol engines. This is a multi-functional measure that is often a last resort before disassembling the engine and regenerating the injectors. The product is very easy to use, it is controlled directly to the strip by means of flexible cables with a cross-section of about 8 mm and a length of about 1.5 m.

The TEC 2000 fuel injector cleaner works extremely efficiently , eliminating the accumulation of moisture around the injectors and contaminants in the cylinders. Moreover, the product also reduces their consumption. One 375 ml can is sufficient for single use. Petrol injector cleaner meets all required quality standards, including EN ISO 9002 . The product can be used both in industrial and domestic conditions.

Injection cleaner (gasoline) - how to use it?

The best solution is to apply the product directly to the spray rail using a universal spray cleaner that you can easily find on the market.

As a rule, such a device consists of two wires with a cross section of approx. 8 mm and a length of approx. 1.5 m.

We recommend installing a fuel filter on the cleaning system (between the can and the injection rail).

Cleaning the injectors ends when the preparation in the can runs out.

Note:

- Petrol injector cleaner should be used with the engine valve open.

If your vehicle's injectors are heavily contaminated, we recommend a slightly longer application time (approximately 40 minutes) using two cans of TEC 2000 Fuel Injector Cleaner (2x375ml).

STEP 01
Disconnect the supply and return fuel lines from the injector rail

02. STEP
Connect the service hoses (instead of the factory hoses) to the universal feed unit

STEP 03
Insert the ends of the service lines into the can of TEC 2000 fuel injector cleaner

STEP 04
Start the engine
From this moment, the preparation starts working. One can or 375 ml is enough for about 20 minutes of work

STEP 05
When the can is empty, turn off the engine

STEP 06
Disconnecting service hoses

STEP 07
Connect the factory hoses
Note: After the entire procedure, we recommend replacing the fuel filter.

Hose kit ID 1180092 can be used