clamps and wedges for leveling/installing wall and floor tiles 2mm 50+50pcs

Available 3pc.
Maximum plate thickness 14 mm
Minimum joint thickness 2 mm
Content Clips x50, Wedges x50

Quantity of pieces pcs
50+50

A modern tile leveling system that makes their installation easier and faster. The set consists of 50 removable clips and 50 reusable wedges made of high-quality plastic. Helps eliminate surface irregularities.

It is intended for ceramic, stoneware, rectified floor and wall tiles in different sizes and thicknesses of 7 - 14 mm and with a minimum joint gap of 2 mm.

Advantages of the VOREL system:

replaces narrow crosses
prevents movement during installation and gluing
speeds up tile installation while maintaining perfect joints and joints
no need to use additional tools
it can be used on walls and floors
easy to assemble for any skill level
How to use:

After applying the glue, insert the clips under the plate so that there are 2 clips on each side of the plate.
slide the other plate onto the clamps
insert the wedge and press to align the tiles
After the tile mortar (glue) hardens, remove the clamp by tapping lightly
The number of wedges and clips per 1 m2 depending on the size of the board:

30 cm x 30 cm - 42 pcs.
33 cm x 33 cm - 36 pcs.
40 cm x 40 cm - 20 pcs.
45 cm x 45 cm - 28 pcs.
50 cm x 50 cm - 24 pcs.
60 cm x 60 cm - 10 pcs.
80 cm x 80 cm - 10 pcs.
60 cm x 30 cm - 22 pcs.
100 cm x 50 cm - 16 pcs.
120 cm x 60 cm - 10 pcs.