glue Universal epoxy epoksühüdrauliline, blue, 100g

Nimi: epoksühüdrauliline paste

Hüdropasta on 2-component tiksotroopne glue, which is based epoksüvaigul, kõvendil, klaaskiududel and spetsiaalsetel moisture ristsiduvatel ainetel. it is product, which is intended to different leaks for removal, especially humid inside rooms, where occurs often water and vapor (for example köögis, vannituba, kelder, veevarustuskanalid). product on pastataolise konsistentsiga, no voola vertikaalsetelt surfaces, durable keemilistele mõjuritele and ilmastikutingimustele. it is asendamatu leaks fast removing places, where traditional keevitamine pole possible.
- Features:
• no jookse vertikaalsetelt surfaces off
• high adhesiveness märgade surfaces
• survekindel paigaldistes
• is not elektrit juhtiv
• inner- and outdoor for use
• Waterproof
• durable muutuvatele temperatuuridele
• durable agressiivsetele keemilistele ainetele (lahjendatud happed and alused, most solvents), greases and töövedelikele
• after kuivatamist saab it to be treated (grinding, cutting, boring)
• can paint
application
materials: metals, their sulamid and valud (aluminium, stainless steel, steel, cast iron steel, cast iron, bronze, brass), glass, ceramics, portselan, concrete, stone, brick, hard PVC
Rakendusnäited:
• keskkütteradiaatorite repair, for example radiators water sisselaskeava
• lekkivate veetorude, for example sink all oleva pipe, katla water varustava äravoolutoru repair
• aiakraani repair
• katla thickening
• keskkütte paisupaakide repair
• kanalisatsioonitorude repair

surface ETTEVALMISTAMINE
Leidke lekkekoht and close then veevarustus (liimimise ajal no saa water lekkest out voolata, beacuse this may liimimata kõvastunud ground out pesta). Kui märkate, et water vaatamata sulgventiilile ikkagi infiltrates, remove Leak, torgates puutüki pilusse.
clean mustusega coated õliseid surfaces, eelistatavalt hot with water pestes rasvaärastusvahenditega, for example Technicqll kaminaklaaside puhastuspastaga. Kui sul pole
special pesuvahendeid, you can to use common nõudepesuvahendit and brushes, which cleans thoroughly dirt and from grease. then karestage Bonding surfaces sandpaper, or viiliga. zinc plated teraspindade puhul remove tsinkikiht sidumispunktist. crack black faasida, et paste saaks tühimiku to fill. before glue applying wash elements preparaadiga or Technicqll puhastuskomplektiga and dry carefully.
TINGIMUSED
• application temperature
to use at temperature over 10oC. optimal pealekandmistemperatuur on 18-25oC.
• Epoksüpastad ristseovad resin (komponent A) and hardener vahelise keemilise reaktsiooni tulemusena
(komponent B) 1: 1 mahusuhtes, therefore is very important koostisosi thoroughly mix.

1. mix hüdropasta kahes etapis, by using at once half komponendi A + B massist. Place the two võrdset quantity mõlemat koostisosa (1: 1) kaasasolevale kausile by using different lusikaid. Kui kahtlete, use always less hardener - komponenti B. mix carefully, up to saadakse steady paint - no esine triipe neither õhumulle.
2. Apply ettevalmistatud mixture nurkadesse, et neid to fill.
o be sure that, et glue laotamine no kesta longer than glue serviceable life, st approximately 30 minutes.
o Kui it is for example katkine pipe, mähkige after paste applying lekkekoht klaasvõrguga and leave vuuk approximately 30 minutes, et mass no kõveneks.
3. then mix ülejäänud paste quantity and Apply second ​​kiht.
o initial ristsidumise time on approximately 2 hours.
4. Et vuuk saaks complete tugevuse, leave parandatud element 24 tunniks seisma.
o complete kõvenemise time saab lühendada, sisestades parandatud element termokambrisse, which temperature on 100–150 ° C, or suunates warm air power prior hardened grout line mounting, for example kuivati ​​või kuumutuspüstoli abil.

advice and MÄRKUSED
• before segamist kastke resin and hardener CLOSED anumad mõneks minutes (approximately 5 minutes) hot vette (approximately 90 ° C) - kuumutatud components on konteineritest lighter to remove and neid on easier mix.
• don't use PP, PE and PTFE to connect.
• Parandatud ala for making harder you can to use kinnitatud klaasvõrku
• remove fresh stain and excessive paste lakibensiini, atsetooni or isopropüülalkoholiga.
• Kui vuuk Works higher at temperature, for example katla thickening, vähendage hardener quantity resin in a ratio. less hardener prolongs ristsidumise time and increases grout lines soojustakistust
• Kõrgsurvepaigaldiste leaks korral Apply several layers glue, järgmine layer black to apply after it, kui eelmine on Partly ristseotud. fully hardened pastakihi pealekandmisel karestage surfaces mechanically.
• seal for making harder use metallklambreid (u -bolts) - place these kõvastumata pastakattele.
• Lamedate surfaces for sealing, for example high pressure soojusvahetites, use for making harder bolts sheet metal katteid, nii et surface, net and katteplaat and keerdpoldid kleepuksid seal moodustamiseks together which tugevusparameetrid is not madalamad kui parandatud Device terved walls.

Technical specifications
stand: epoksükompositsioon
(epoksüvaik + hardener)
sticky paint: A: sinakashall, B: dark grey
connections paint: grey
Consistency: tiksotroopne paste
density: A: 1,51-1,55 g / cm3, B: 1,57-1,59 g / cm3
Serviceable life after segamist: 30 min.
Esmane kõvenemisaeg: 120 minutes.
full kõvenemisaeg: 24 hours
temperature resistance: -40 ° C ÷ 100 ° C
Kokkutõmbumine: <0,1%
Nihketugevus:
aluminium 11 MPa
Purunemisjõud:
steel-steel
12 MPa
HOIUSTAMINE
• to keep densely CLOSED anumas at temperature 5 ° C up to 25 ° C.
• to protect moisture eest.
• glue you can to keep with other toodetega.