Universal epoxy adhesive, beez, 10ml 5 minutes

Nimi: epoksüliim 5 minutes
capacity 2x5 ml

2-component epoksüvaigu glue household, autotööstuses and in industry used small parts to connect. this adhesion and täiendab kohalikke material, which is damaged breakage, friction, corrosion because of. this product on essential cases, if is needed väikest quantity glue, fast parandamist and maximum durability. after kõvenemist saab vuuki mechanically to be treated and to paint. glue on durable to a different keemilistele teguritele and muutuvatele ilmastikutingimustele, therefore saab it to use inside kui outside.
- Features:
• beige
• fast
• flexible
• durable impacts, impacts and hõõrdumisele
• inner- and outdoor for use
• Waterproof
• frost resistant
• durable muutuvatele temperatuuridele
• durable agressiivsetele keemilistele ainetele (lahjendatud happed and alused, most solvents), greases and töövedelikele
• after kuivatamist saab it mechanically to be treated (grinding, cutting)
• can paint
• Solvent free

application
materials: glass, ceramics, portselan, concrete, plastic, stone, metal, aluminium, rubber, wood, brick, gold, silver, steel, cap, puidupõhised materials, vahud, polüstüreen
Rakendusnäited:
• broken lillepottide, vaaside, portselanist and cheramic figuuride repair
• damaged majapidamistööriistade repair, for example haamervõlli, shovel fixing
• Car vacuum cleaner body, triikimislaua, kuivati ​​purunenud elements repair
• köögiriistade, for example broken noatera, rullkäepideme repair
• kinnitusklambrite fixing mirrors and seinakappide mounting
• broken elements, like hooks, uksekäepidemed, furniture handles, kleepimine
• broken plastic kaitseraudade, covers and armatuurlaudade liimimine

surface making
glued surfaces peaksid be:
• clean
clean glued surfaces nii, et neil no oleks dirt neither saastumist (dust, grease). before epoksüliimide using karestage surfaces. this increases sidumispinda and therefore also sideme strengths. then rinse connected surfaces technical rasvaärastusvahendi.
• dry
 dry cleaned surfaces.

TINGIMUSED
• Working temperature
to use at temperature over 10oC.
• Epoksüliimid ristsiduvad resin (komponent A) and hardener vahelise keemilise reaktsiooni tulemusena
(komponent B) 1: 1 mahusuhtes, therefore is very important koostisosi thoroughly mix.

1. Punch pipes diafragma caps tagaküljega through.
2. Pigista correct quantity components A and B 1: 1 mahulises ratio kaasasolevale kausile and mixed ingredients lusikaga carefully through, up to saadakse homogeenne, triipudeta mass.
3. Apply ettevalmistatud mixture for one surface.
o be sure that, et glue laotamine no kesta longer than glue Serviceable life, st approximately 2 minutes after segamist.
4. push glued elements heavily together.
o Kinnitage glued elements mõneks minutes. glue initial ristsidumise time on approximately 8 minutes.
o Parandusaega you can lühendada, suunates liigendisse warm õhuvoolu, for example kuivati ​​abil.
5. Et vuuk saaks complete tugevuse, leave glued element 12 tunniks.

advice and MÄRKUSED
• don't use PP, PE and PTFE to connect.
• glue kõvenemise speed mõjutavad temperature and used ühendi quantity. don't use paksuseinaliste valandite ., beacuse ristsidumisreaktsiooni ajal may temperature even ületada 70oC.
• remove fresh stains alcohol, atsetooni or isopropüülalkoholiga.

Technical specifications
stand: epoksükompositsioon
(epoksüvaik + hardener)
sticky paint: beige
connection paint: beige
Consistency: liquid
density: A: 1,2-1,4 g / cm3 , B: 1,3-1,5 g / cm3
Serviceable life after segamist: 2 min.
Esmane kõvenemisaeg: 8 minutes.
full kõvenemisaeg: 12 hours
temperature resistance: -30C ÷ +80C
Kokkutõmbumine: <0,1%
Nihketugevus:
stainless steel 10 MPa
Purunemisjõud:
steel-steel 7-10 MPa
HOIUSTAMINE
• to keep densely CLOSED anumas at temperature 5 ° C up to 25 ° C.
• to protect moisture and from cold.
• glue you can to keep with other toodetega.
• Kõlblikkusaeg and partii number pipe tihendil.