lifter - presser 500kg pm-1
$174,20
Arrives in 7-8wd
ADD TO BASKET
mechanic's third hand
lift-press pm-1 is used for maintenance work under a two-column lift. Simply press the lever to instantly extend the pm-1 lifting core to the desired height. then by turning the 19mm wrench, you can precisely raise or lower the engine, gearbox, suspension elements, etc. the lift is very useful when changing shock absorbers, engine mounts, as well as when changing elements of the exhaust system. adjustment speed and precise up and down operation make the pm-1 lifter a very popular tool and appreciated by mechanics.
endurance
a well-known problem is the frequent damage of hydraulic foundations caused by exceeding their permissible load. it is difficult to judge how much force should be used when lifting an engine mount, shock absorber or swing arm. it often happens that the hydraulic base starts to lift the whole vehicle, the actuator is then damaged, loses tightness and the base suddenly drops, endangering the workers under the car. When lifting the pm-1, when the weight exceeds 1000 kg, the roller gets stuck on the inner core so strongly that it starts to break. the car is stable and only the pm-1 lifting core is damaged. just turn the core 90* and you're good to go.
benefits in the workshop
if there is no time to pump the hydraulic base, mechanics often place stationary jacks with pins under the two-post lift and lower the vehicle being serviced onto them. compared to using a hydraulic base, this is a faster method, but very dangerous and uses a two-post lift to a much greater extent. When using pm-1, two-column forklifts wear less, electricity is saved, and mechanics do their work safely.
accessory tp0005
gear plate with tilt angle adjustment and base mounts with rotating wheels facilitate assembly and disassembly of gearboxes. pm-1 lift truck with equipment can be found in our store under the link: pm-1w. if you already have a pm-1 lift, you can order the full tp0005 kit for it using the link: tp0005
model : pm-1
maximum lifting capacity: 500 kg
lifting height: 1950 mm
height after lowering: 1200 mm
height adjustment: 19 mm spanner
optional equipment: plate with an adjustable angle of inclination, fixings with rotating wheels
powder coating : yes
lift-press pm-1 is used for maintenance work under a two-column lift. Simply press the lever to instantly extend the pm-1 lifting core to the desired height. then by turning the 19mm wrench, you can precisely raise or lower the engine, gearbox, suspension elements, etc. the lift is very useful when changing shock absorbers, engine mounts, as well as when changing elements of the exhaust system. adjustment speed and precise up and down operation make the pm-1 lifter a very popular tool and appreciated by mechanics.
endurance
a well-known problem is the frequent damage of hydraulic foundations caused by exceeding their permissible load. it is difficult to judge how much force should be used when lifting an engine mount, shock absorber or swing arm. it often happens that the hydraulic base starts to lift the whole vehicle, the actuator is then damaged, loses tightness and the base suddenly drops, endangering the workers under the car. When lifting the pm-1, when the weight exceeds 1000 kg, the roller gets stuck on the inner core so strongly that it starts to break. the car is stable and only the pm-1 lifting core is damaged. just turn the core 90* and you're good to go.
benefits in the workshop
if there is no time to pump the hydraulic base, mechanics often place stationary jacks with pins under the two-post lift and lower the vehicle being serviced onto them. compared to using a hydraulic base, this is a faster method, but very dangerous and uses a two-post lift to a much greater extent. When using pm-1, two-column forklifts wear less, electricity is saved, and mechanics do their work safely.
accessory tp0005
gear plate with tilt angle adjustment and base mounts with rotating wheels facilitate assembly and disassembly of gearboxes. pm-1 lift truck with equipment can be found in our store under the link: pm-1w. if you already have a pm-1 lift, you can order the full tp0005 kit for it using the link: tp0005
model : pm-1
maximum lifting capacity: 500 kg
lifting height: 1950 mm
height after lowering: 1200 mm
height adjustment: 19 mm spanner
optional equipment: plate with an adjustable angle of inclination, fixings with rotating wheels
powder coating : yes
Delivery method
Postal office
To the nearest Postal office
To the nearest Postal office
$672,30
Delivery date 2025-06-30
$606,10
ADD TO BASKET
Arrives in 3-4wd
$269,80
ADD TO BASKET
Arrives in 3-4wd
$1.698,70
$1.947,90
-13%
ADD TO BASKET
Arrives in 3-4wd
$606,10
ADD TO BASKET
Arrives in 3-4wd
Which hand tool steel is the most durable?
As we all know, different steels are used to make different hand tools. The properties and strength of the steels are given below.
... More...
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
