diameter gauges and depth gauges

Available 1pc.

mark	yt-44095
manufacturer code	5906083081989
series	150x80x1 mm
of material	steel
application	hole diameter control device, for mounting on twist drills to obtain a hole of the desired depth
set the content	board x2 (metric: 1, 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.2, 4.5, 4.8, 5, 5.2, 5.5 , 6, 6.5, 7, 7.5, 8, 8.5, 9, 10. , 10.5, 11, 11.5, 12, 12.5, 13mm; inch: 1/16", 5/64", 3/32", 7/64",
diameter	1/16"-1/2" / 1.0-13mm
quantity of pieces pcs	10
set contents, etc.	1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64") ,
set contents, etc. 2	drill stops x7 (ø3, 4, 5, 6, 8, 10, 12 mm), hex key to lock the stop (1.5 mm)

The 10-piece set consists of two steel plates with holes for checking the diameter.

plate size approx. 150 x 80 mm x 1 mm.

• meter plate fi/mm 1/1.5/2/2.5/3/3.2/3.5/4/4.2/4.5/4.8/5/5.2/5.5 / 6/6.5/7/7.5/8/8.5/9/9.5/10 /10.5/ 11/11.5/12/12.5/13
• inch plate fi/": 1/16.5/64.3/32.7/64.1.8/9/64.5/32.11/64.3/16.13/64.7/32, 15/64.1/4.17/64.9/32.19/64.5/32.1/64.5/16.3. 64.3/8.25/64.13/32.27/ 64.7/16.29/64.15/32.31/64.1/2

the set includes drilling depth stops - turned, steel with locking screw fi 3 / 4 / 5 / 6 / 8 / 10 / 12 mm and one hex key 1.5 mm. gauges are used for quick pre-checking of outer diameters / e.g. drills, rollers, rods, wires, etc.

gauges are used for quick pre-checking of outer diameters / e.g. drills, rollers, rods, wires, etc. ring drilling depth gauges, when placed on the drill, allow accurate control of the depth of the drilled hole. place the stops on the drill, determining the appropriate drilling depth / the ring should be locked on the drill / checked the diameter of the element / eg nail, rod, roller / we insert it into the hole in which it can be moved with minimal play. the diameter is marked on the plate next to the hole. the set includes two guide plates and drilling depth limiters - turned, with steel locking screw fi 3 / 4 / 5 / 6 / 8 / 10 / 12 mm and one hex key 1.5 mm.