40KG; grease lithium EP-1; NLGI 1; for bearings and centralized lubrication systems

LITEN® EP plastmääre valmistatakse refined from mineral oil, which viscosity at temperature 40 ° C on approximately 150 mm2, liitiumseebid 12-hüdroksüülsteariinhappest and set additives, which suurendavad their libestavaid, antioksüdatiivseid and anticorrosive properties.
application
LITEN® EP plastmäärded is intended to big load kokkupuutuvate rulllaagrite for lubrication and less loaded bearing ., which is aga kokkupõrkekoormusega.
grease field of application:  -20 C up to +120 ° C even kokkupuutel with water.

limited Working temperature may siiski to be higher or lower, depending on bearing tüübist and vajalikest määrimisperioodidest.

• Liten EP-1 is intended for keskmääritud equipment bearing for lubrication, which work mõõdukatel ümbritsevatel at temperatures and demand grease pealesurumist long vahemaade from behind,

Standardid, fastenings, Specifications
DIN 51 502: KP1G-20
ISO 6743-9: BCHB-1
Füüsilised and keemilised Features
Parameetrid Ühik typical väärtused
NLGI 1
Töötatud diameter at temperature 25 ° C mm / 10 332
Tungimine at temperature - 200 ° C / 10 172
Kukkumispunkt 0C 202
Konstruktsiooni stabiilsusõlide eraldamine from grease (m / m)% 3,8
Keeviskoormus kG 250
Base oil viscosity
at temperature 40 ° C

mm2 / s 150