crc power lube lubricating oil + ptfe 500ml
Goods available only in e-shop
17,30€
18,20€
-5%
Delivery: home 3-4wd
ADD TO BASKET
CRC POWER LUBE
1. ÜLDKIRJELDUS
bigger grease PTFE-ga *.
CRC Power Lube on big performance grease, which contains keerukat additive containers with PTFE-ga, to offer long protection friction, wearing and against corrosion.
this exceeds tavapäraseid määrdeaineid määrdeefektiivsuse poolest, increasing dramaatiliselt parts and equipment lifetime and efficiency, especially with extreme pressure and keskkonna conditions.
2. Features
• PTFE lisamine helps minimeerida surface and surface contact hõõrdumisvastase varjestusega.
• tolerates ekstreemset koormat.
• exceeds tavalistes määrdeainetes äärmisel with pressure.
• penetrates in and nihutab moisture, leaving protective film.
• safe for all metals and alloys.
• painted surfaces, plastics and straps kahtluse korral is recommended katsetada.
• aerosols on convenience huvides equipped with 360 ° (backwards) pihustusventiiliga and pikendustoruga.
• aerosols, which is survestatud mittesüttiva CO2 propellendiga, giving aktiivse Product sisaldusele over 97%.
3. TAOTLUSED
long term greasing and protection:
• bearings
• cables
• rollers
• Juhtribad
• pulleys
• libisevad surfaces
• valves
• Käigud
• ball- and pistikühendused
• Koputab and sureb
• hinges
• engines
• Lõikeriistad
• Täppistööriistad
• Ketiajamid
• corrosion inhibiitor.
4. instructions
• before using shake properly.
• spray light, ühtlaste kihtidega surfaces protection and for lubrication. before using let steep short aja jooksul.
• heavily rusted parts kandmisel kraapige first traatharjaga. difficulty places to reach use extension pipe.
• optimal ennetava maintenance to ensure repeat applying regulaarsete ajavahemike järel.
• if necessary saab mittekuivatava film to remove CRC Fast Dry Rasvaeemaldajaga or CRC Industrial Rasvaeemaldusvahendiga.
5. Product typical Data (without propellendita)
look: merevaigukollane läbipaistmatu fluid
Erikaal (@ 20 ° C): 0,77
solvents destilleerimisvahemik: 60-100 ° C
Flash Point (CLOSED container): <0 ° C
Aurutihedus (solvent, than with air = 1): 3 (arvutatud)
film final thickness (@ 20 ° C, after 24-tunnist spreading): 10-15 um
film Features (after solvent aurustamist)
dynamic viscosity (@ 20 ° C): 360 mPa.s
Erikaal (@ 20 ° C): 0,94
salt pihustuskindlus (*): 90 h.
Kuumuskindlus: 120 ° C (150 ° C short time)
Valamispunkt: <-20 ° C.
1. ÜLDKIRJELDUS
bigger grease PTFE-ga *.
CRC Power Lube on big performance grease, which contains keerukat additive containers with PTFE-ga, to offer long protection friction, wearing and against corrosion.
this exceeds tavapäraseid määrdeaineid määrdeefektiivsuse poolest, increasing dramaatiliselt parts and equipment lifetime and efficiency, especially with extreme pressure and keskkonna conditions.
2. Features
• PTFE lisamine helps minimeerida surface and surface contact hõõrdumisvastase varjestusega.
• tolerates ekstreemset koormat.
• exceeds tavalistes määrdeainetes äärmisel with pressure.
• penetrates in and nihutab moisture, leaving protective film.
• safe for all metals and alloys.
• painted surfaces, plastics and straps kahtluse korral is recommended katsetada.
• aerosols on convenience huvides equipped with 360 ° (backwards) pihustusventiiliga and pikendustoruga.
• aerosols, which is survestatud mittesüttiva CO2 propellendiga, giving aktiivse Product sisaldusele over 97%.
3. TAOTLUSED
long term greasing and protection:
• bearings
• cables
• rollers
• Juhtribad
• pulleys
• libisevad surfaces
• valves
• Käigud
• ball- and pistikühendused
• Koputab and sureb
• hinges
• engines
• Lõikeriistad
• Täppistööriistad
• Ketiajamid
• corrosion inhibiitor.
4. instructions
• before using shake properly.
• spray light, ühtlaste kihtidega surfaces protection and for lubrication. before using let steep short aja jooksul.
• heavily rusted parts kandmisel kraapige first traatharjaga. difficulty places to reach use extension pipe.
• optimal ennetava maintenance to ensure repeat applying regulaarsete ajavahemike järel.
• if necessary saab mittekuivatava film to remove CRC Fast Dry Rasvaeemaldajaga or CRC Industrial Rasvaeemaldusvahendiga.
5. Product typical Data (without propellendita)
look: merevaigukollane läbipaistmatu fluid
Erikaal (@ 20 ° C): 0,77
solvents destilleerimisvahemik: 60-100 ° C
Flash Point (CLOSED container): <0 ° C
Aurutihedus (solvent, than with air = 1): 3 (arvutatud)
film final thickness (@ 20 ° C, after 24-tunnist spreading): 10-15 um
film Features (after solvent aurustamist)
dynamic viscosity (@ 20 ° C): 360 mPa.s
Erikaal (@ 20 ° C): 0,94
salt pihustuskindlus (*): 90 h.
Kuumuskindlus: 120 ° C (150 ° C short time)
Valamispunkt: <-20 ° C.
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
