TROTON- Under Seal 500ML INTERGUM SPRAY
Goods available only in e-shop
8,50€
Delivery: home 3-4wd
ADD TO BASKET
this product is intended for only for professional for use!
quickly drying substance bitumen and waxes based šassii permanent for protection corrosion eest. it has very good adhesiveness kõikvõimalike metals, also painted surfaces, old värvkatete, wood and plastics mounting *.
after drying leaves this heavily sticky cover, pakkudes head mechanical protection different kliimatingimustes. it iseloomustavad great sound summutavad Features. it no saa to paint ühegi värvimissüsteemiga.
FÜÜSILISED and KEEMILISED Features
black paint
viscosity * 100-200 Pas
density: 1,03 - 1,06 kg / l
consumption: approximately 0,6 kg / m2
temperature resistance: -25 up to 80 ° C
Puudtekuiv **: 120–180 minutes 600 μm märgkilega
fully dry **: 4–6 hours 600 μm märja film
Eemaldamismeetod: fresh kate - solvent
Kõvenenud kate - mechanically
* not for use with ptfe
** at temperature 20 °C and suhtelise õhuniiskuse at 65%
use
• Kaetav surface must be clean, dry, dust free, grease eemaldatud and stainless.
• before using shake containers.
• optimal pihustuskaugus on approximately 30 cm.
• Kui It is reccomended paksemat layers, on before next layer mounting recommended let kattel to dry.
• clean contaminated surfaces and equipment lahustiga.
quickly drying substance bitumen and waxes based šassii permanent for protection corrosion eest. it has very good adhesiveness kõikvõimalike metals, also painted surfaces, old värvkatete, wood and plastics mounting *.
after drying leaves this heavily sticky cover, pakkudes head mechanical protection different kliimatingimustes. it iseloomustavad great sound summutavad Features. it no saa to paint ühegi värvimissüsteemiga.
FÜÜSILISED and KEEMILISED Features
black paint
viscosity * 100-200 Pas
density: 1,03 - 1,06 kg / l
consumption: approximately 0,6 kg / m2
temperature resistance: -25 up to 80 ° C
Puudtekuiv **: 120–180 minutes 600 μm märgkilega
fully dry **: 4–6 hours 600 μm märja film
Eemaldamismeetod: fresh kate - solvent
Kõvenenud kate - mechanically
* not for use with ptfe
** at temperature 20 °C and suhtelise õhuniiskuse at 65%
use
• Kaetav surface must be clean, dry, dust free, grease eemaldatud and stainless.
• before using shake containers.
• optimal pihustuskaugus on approximately 30 cm.
• Kui It is reccomended paksemat layers, on before next layer mounting recommended let kattel to dry.
• clean contaminated surfaces and equipment lahustiga.
20,30€
21,60€
-7%
ADD TO BASKET
Delivery: home 3-4wd
14,40€
18,40€
-22%
ADD TO BASKET
Delivery: home 3-4wd