tefefonihoidja with charger for motorcycle R9-METAL USB QC

Mootorrattahoidik with telefonilaadijaga - R9-metal USB QC
eXtremestyle®
which is R9-metal USB QC-hoidik?

it is primarily mugavus and safety! Pealegi on this combination USB -kiirlaadijast and for motorcycles telefonihoidikust.

strong metal fastening to the handlebar ensures handle's strong paigalhoidmise.

Kruustang, which gap distance on 62–90 mm, suitable for with most of uusimate phones.

cable length on chosen optimaalselt, et it saaks akust võimalikult mugaval and nähtamatul viisil juhtida. cable lõpetatakse ühelt poolt pins .

to a different for phones, to a different for motorcycles

due to universaalsete lahenduste kasutamisele work eXtremestyle® kaubamärgihoidjad excellently different type on motorcycles and suitable for to a different telefonimudelitele (kui their dimensions suitable for). not depending on this, kas teil on murdmaa-, spordi-, Hiking-, alasti-, enduro- or chopper- motorcycle , on R9-metal USB QC-fastening Excellent choice.
Hoidikuelemendid

1. Pöördpea Joint võimaldab seada phone in a convenient to the position.
2. Universaalset holder can fix praktiliselt every 20-30 mm diameter to the handlebar.
3. Mirror-/screw mounting on Excellent alternative heavily ehitatud to the handlebar.
4. QC3.0 USB plug on Universal, fast and very comfortable five phone to charge sõidu ajal.
5. switch on comfortable five USB-socket power katkestamiseks.
Mootorrattahoidik with telefonilaadijaga - R9-metal USB QC
Mootorrattahoidik with telefonilaadijaga - R9-metal USB QC
what Quick Charge 3.0 teile annab?

Vastus on easy – phone or other Quick Charge technology equipped with Device fast charging . eXtremestyle® R9 metal USB QC is equipped with Quick Charge 3.0 technology (lühendatult QC3.0), but compatible also It's varasemate versioonidega and without selleta 5 V with current laetavate seadmetega.

Quick Charge on completely safe nii for the electronic devices and also their batteries lifetime period, what higher on battery state of charge level, it aeglasemalt laetakse.
two juhtraua mounting kinnitamise viisi

1. Place the stand handle's for fixing optimaalsesse to the position.
2. Turn screw kinni.
3. install fixation nut.
4. push phone holder gently against kinnituskuuli.
5. Reguleerige holder suitable Corner alla and Turn nut kinni.
6. Hoidiku installation on lõpetatud.

Lisavarrega variant

1. Turn Mirror/screw open, kinnitage lisavars, set up Suitable for angle and Turn Mirror/screw in.
2. install kokkupandud holder lisavarrele, installation on lõpetatud.

 

specification

gap: 62 - 90 mm
Juhtraua fixing diameter: 20 - 30 mm
input: DC 12 - 24 V
output: DC 5 V - 3,4 A / 9 V - 2,5 A / 12 V - 2 A
wire length: 1,5 m
Supplied with

- handle
- juhtraua fastening
-
peeglikinnitus - spacers -
varukaitse
- juhtmeköidised - 2pc
- hex key