Polyester Resin ULTRA PLUS 720 1L + hardener

Available 2pc. PLUS 720 POLYESTER RESIN on lamineerimine intended product . this contains struktuurset polüestervaiku, which on lisatud suitable for katalüsaatorid. product is intended for big defects and rusted areas for repairing lehtmetallist and laminaadist car keredetailidel, also paatides, jahtides and matkahaagistel. Lõplikku covers is characterized by very good nake aluspinnaga.

suitable for aluspinnad:
- old värvikatted,
- polüesterlaminaat,
- steel,
- aluminium,
- kahekomponendilised akrüülkrundid,
- wood.

Caution: don't Apply vaiku straight pealispesu kruntvärvidele neither ühekomponentsetele acrylic- and nitrotselluloostoodetele.

Substraatide töötlemine:
- old pinnakatted: rasvatustage (clean by removing dirt and greases) , lihvige with dry sandpaper P80 – P120 and rasvatustage (clean by removing dirt and greases) again.
- polüesterlaminaadid: rasvatustage, lihvige with dry sandpaper P80 - P120 and rasvatustage (clean by removing dirt and greases) again,
- teraspinnad: rasvatustage, lihvige with dry sandpaper P80 - P120 and rasvatustage (clean by removing dirt and greases) again,
- alumiiniumpinnad: rasvatustage, mattige abrasiivse viimistluspadjaga and rasvatustage (clean by removing dirt and greases) again
- kahekomponentsed akrüültäiteained: rasvatustage, lihvige with dry sandpaper P180 - P240 and rasvatustage (clean by removing dirt and greases) again,
- wood: lihvige with dry sandpaper  P80 – P120 and rasvatustage (clean by removing dirt and greases) again.

Segamissuhe:
PLUS 720 resin –100 gor 100 ml
hardener Betox 50PC –2 - 3 g or 2 - 3 ml

Serviceable life after hardener segamist:
10 up to 15 minutes at temperature 20 °C.

Kaetav:
Polüesterpahtlid, sprayable polüestertäiteaine, most kruntvärvid, colours and varnishes.

Menetlus:
clean and lihvige surface
rasvatustage (clean by removing dirt and greases) surface
Valmistage front necessary matt. Kärbi klaaskiudmatt nii, et this ulatuks u. 2 cm outside kahjustuse asukoha piire.
Valmistage vaiku quantity, what you can tarbida u. 10 minutes. Jälgige vajalikku hardener quantity. mix koostisosi carefully, up to saadakse steady paint.
components kaalukogus: to add 100 g vaiku 2 – 3 g kõvendile. Töötlemisaeg 20°C at on 10 up to 15 minutes
Apply resin with brush to a clean alale
Apply kärbitud matt, push parandatud to the area and küllastage with brush kantud vaiguga
depending on kahjustusest may ülaltoodud samme korrates to apply several matikihti
wait u. 45 minutes 20°C at or
Kuumutage 15 minutes at temperature up to 60oC

Lihvige laminaatpinda P80-P120 abrasiivpaberitega or Fill polüesterpahtliga.


Caution: Kõvenenud surface viscosity improves järjestikuste layers nakkumist; if necessary saab viscosity tühistada NC lahustiga pesemisega. don't place hardener mixed vaigujääke backward botlle. for the lamination usable typical suhted on following:
u. 2 kg polüestervaiku 1 kg kandematerjali (klaaskiudmatt or kangad) spaces.

Taotlustingimused:
minimum pealekandmistemperatuur on +10°C
color: yellow
equipment cleaning: NC solvent.