Hübriidne epoxy Polyester Putty white with hardener 1000ml ( 1,81kg )

Available 2pc. TOOTED:
HÜBRIID – Polyester- and epoksüpahtel.
hardener polüesterpahtlile.

TOOTEKIRJELDUS
high-quality fine Polyester- and epoksüpahtel car body fast for repair – uusim technology pahtlite area. specially zinc plated steel for applying.
* creamy tekstuur.
* Excellent nake with metal, especially zinc plated steel and for aluminum puhul
* easy and fast grinding.
* after grinding exceptional smooth surface.
paint - white
Läikeaste – Matt
density – 1,81 (+/- 0,03) kg/l.

surface ETTEVALMISTAMINE
product on very good adhesion different surfaces. it saab to implement:
* Paljas steel and aluminium after tasandamist and rasvatustamist.
* with zinc coated steel after tasandamist and rasvaärastus.
* grinded Glass Fibre (GFK/GRP), polüesterpahtlid, acrylic- and epoksiidkrundid and olemasolevad pinnakatted in good condition.


use
fine and soft kitt car body fast for repair. specially pühendatud Application zinc plated steel.
Segamissuhe:
Putty 100 pc hardener 2 pc

mix carefully, up to saadakse homogeenne paste. Olge ettevaatlik, et not cause õhusulgusid.

layer thickness
Kitti may peale apply several thin layer. after each of them peaks product kõvenema. thickness not allowed ületada 3 mm.
Serviceable life 20oC at on 4÷5 minutes
Kõvenemisaeg 20°C at 16÷26 minutes.
temperature alla 20°C prolongs significantly kõvenemisaega.

IR kuivatamine
5÷7 minutes lühilaineid don't exceed temperature 80oC.
zinc plated surfaces puhul not allowed temperature ületada 60oC
Caution: wait approximately 5 minutes before IR-kuivatusprotsessi

grinding
rough grinding (dry): P100÷P150.
Viimistluslihvimine (dry): P180÷P320.

EDASISED work
Polüesterpahtleid saab over to cover:
* 2K polüesterpahtlid.
* 2K polüesterpihustustäiteained.
* 2K akrüültäiteaineid.
* 2K epoksütäiteained.

ÜLDMÄRKUSED
* excessive kõvendikogus põhjustab pealiskihi pleegitamisel probleeme!
* 2K toodetega working on recommended to use isikukaitsevahendeid. to protect to eyes and hingamisteid.
* clean püstolid and equipment immediately after using.
* Ruumid peaksid be well ventileeritud.