Fibreglass Putty beige 0.45KG

description: klaaskiuga reinforced Putty. due to spetsiaalsetele polüestervaikudele and lühikestele klaaskiududele on product very good tugevusparameetrid with good elastsusega. soft and easy grinding because of on this perfect choice deeper dents and big pindalade .. adheres well different aluspindadega, sh zinc plated steel.

suitable for aluspinnad
- old värvikatted,
- polüesterlaminaat,
- steel,
- zinc plated steel,
- aluminium,
- kahekomponendilised akrüülkrundid,
- kahekomponendilised epoksükrundid.

Caution: don't Apply straight happekrundile, adhesion suurendavale substances, ühekomponendilistele akrüültoodetele and NC-products.
adheres with most of Nowadays used zinc plated steel types.

surface ettevalmistamine:
- old pinnakatted: rasvatustage, dry liivaga P180 - P240 and remove again grease/ greases;
- polüesterlaminaadid: rasvatustage, dry liivaga P80 - P120 and remove again grease/ greases;
- teraspinnad: rasvatustage, dry liivaga P80 - P120 and remove again grease/ greases;
- zinc plated steel: rasvatustage, mattige abrasiivse nõelkangaga and remove again grease/ greases;
- alumiiniumpinnad: rasvatustage, mattige abrasiivse nõellapiga and remove again grease/ greases;
- acrylic primer: rasvatustage, dry liivaga P180 - P240 and remove again grease/ greases;
- epoksükrunt: rasvatustage, dry liivaga P180 - P240 and remove again grease/ greases;

Segamissuhe:
Putty –100 massiosa;
hardener – 2 massiosa

Serviceable life after hardener segamist:
4 up to 8 minutes 20°C at

drying time:
20-30 minutes at temperature 20 °C
time saab lühendada hoides 10 minutes max 60°C at.

grinding:
rough P80 - P120.
Kaetav:
Polüesterpahtlid, polüesterpihustiga filler, akrüülkrundid and epoksükrundid.

Menetlus:
mixed components steady paints to obtain properly through. Järgige hardener nõutavaid koguseid; components õigete vahekordade to obtain is recommended dose ground Follow. apply peale pahtlilabidaga layer, which thickness doesn't exceed 5 mm. It is recommended on tasandada
KIUD surface with other polüesterpahtlitega before next layer applying. minimum pealekandmistemperatuur on +10°C.