soft pahte 1,85kg + hardener
Goods available only in e-shop
14,60€
15,30€
-5%
Delivery: home 3-4wd
ADD TO BASKET
505 SUPER SOFT PUTTY
502 Superpehme Putty
Üldised Features:
small asperities for filling.
Kohaldatav zinc plated lehtedele, for the aluminium and It's alloys, pipe, terasplaatidele, for wood, for concrete and plastile. fast kõvenemine võimaldab jätkuvat work. Mikropeenete fillers kaudu is possible very steady surface to achieve. It's elastic and pideva tekstuuri because of saab it pahtlit easy lihvida.
Technical Features:
* work lihtsus
* high elasticity
* good järgimine
* on big surface steady and poorivaba hajutatavus
* easy lihvida also after pikemat perioodi
* good stability even vertikaalsel surface
* fast kõvenemine
* fine surface due to peenetele täidisainetele
* durable nõrkadele against acids and alustele, propellentidele, for solvents, for water and jäätõrjesoolale
stand: thin pigmendi täiteainetega Polyester Resin
paint: ooker
Järjepidevus: soft, tiksotroopne
Serviceable life / operating time at temperature 20 ° C: approximately 4 minutes
Working temperature: min. 12 ° C
drying time (at temperature 20 ° C, 50% suhteline õhuniiskus):
saab lihvida u. 20-30 minutes has passed
hardener lisamine: 2 - 4% (optimal mixture 2,5%)
temperature resistance
kõvenenud material: 120 ° C
use:
before using read carefully etiketil olevaid hoiatavaid tekste and järgige neid!
* Detail, what soovite improve, peaks be stainless, clean, dry, rasvavaba and grinded.
* take required pc pahtlit purgist out and mix this well corresponding quantity hardener.
* Apply mixed material desired layer thickness.
* if necessary you can after kõvenemist lihvida sandpaper 240–400.
* clean tools immediately after using, if necessary nitro-vedeldiga.
* don't tagastage mixed material botlle.
* after u. 20-30 minutes saab parandatud spaces to bore, lihvida (sandpaper 80 - 240), saagida, raspeldada and to paint.
502 Superpehme Putty
Üldised Features:
small asperities for filling.
Kohaldatav zinc plated lehtedele, for the aluminium and It's alloys, pipe, terasplaatidele, for wood, for concrete and plastile. fast kõvenemine võimaldab jätkuvat work. Mikropeenete fillers kaudu is possible very steady surface to achieve. It's elastic and pideva tekstuuri because of saab it pahtlit easy lihvida.
Technical Features:
* work lihtsus
* high elasticity
* good järgimine
* on big surface steady and poorivaba hajutatavus
* easy lihvida also after pikemat perioodi
* good stability even vertikaalsel surface
* fast kõvenemine
* fine surface due to peenetele täidisainetele
* durable nõrkadele against acids and alustele, propellentidele, for solvents, for water and jäätõrjesoolale
stand: thin pigmendi täiteainetega Polyester Resin
paint: ooker
Järjepidevus: soft, tiksotroopne
Serviceable life / operating time at temperature 20 ° C: approximately 4 minutes
Working temperature: min. 12 ° C
drying time (at temperature 20 ° C, 50% suhteline õhuniiskus):
saab lihvida u. 20-30 minutes has passed
hardener lisamine: 2 - 4% (optimal mixture 2,5%)
temperature resistance
kõvenenud material: 120 ° C
use:
before using read carefully etiketil olevaid hoiatavaid tekste and järgige neid!
* Detail, what soovite improve, peaks be stainless, clean, dry, rasvavaba and grinded.
* take required pc pahtlit purgist out and mix this well corresponding quantity hardener.
* Apply mixed material desired layer thickness.
* if necessary you can after kõvenemist lihvida sandpaper 240–400.
* clean tools immediately after using, if necessary nitro-vedeldiga.
* don't tagastage mixed material botlle.
* after u. 20-30 minutes saab parandatud spaces to bore, lihvida (sandpaper 80 - 240), saagida, raspeldada and to paint.
4,20€
ADD TO BASKET
Delivery: home 7-8wd
28,30€
ADD TO BASKET
Delivery: home 3-4wd
22,00€
ADD TO BASKET
Delivery: home 3-4wd
70,60€
ADD TO BASKET
Delivery: home 3-4wd
24,90€
ADD TO BASKET
Delivery: home 3-4wd
21,40€
ADD TO BASKET
Delivery: home 3-4wd