Universaalpahtel beige ULTRA 0,20L

 
MULTI multifunctional Putty

description:It's putty iseloomulik sign on It's mitmekülgsus, st ability apply peaaegu all aluspindadele, what car body katmisel occurs; good performance small and big cavities filling, easy Application kõrgel at temperature and high surface siledus, good lihvitavus thin and jämeda sandpaper and kõvadus on chosen nii, et grinding säiliks desired profile. putty high reaktsioonivõime ensures short aja, which It takes correct kõvaduse to obtain at low at temperatures and Decreases working time.
suitable for aluspinnad:

- old värvikatted,
- polüesterlaminaat,
- steel,
- zinc plated steel,
- aluminium,
- kahekomponendilised akrüülkrundid,
- kahekomponendilised epoksükrundid.

Caution: don't Apply straight happekrundile, adhesion suurendavale substances, ühekomponentsetele akrüültoodetele and NC-products.
adheres with most of Nowadays used zinc plated steel types.

surface ettevalmistamine:
- old pinnakatted: rasvatustage, dry liivaga P180 - P240 and remove grease/greases again;
- polüesterlaminaadid: rasvatustage, dry liivaga P80 - P120 and remove grease/greases again;
- teraspinnad: rasvatustage, dry liivaga P80 - P120 and remove grease/greases again;
- zinc plated steel: rasvatustage, mattige abrasiivse nõelkangaga and remove grease/greases again;
- alumiiniumpinnad: rasvatustage, mattige abrasiivse nõellapiga and remove grease/greases again;
- acrylic primer: rasvatustage, dry liivaga P180 - P240 and remove grease/greases again;
- epoksükrunt: rasvatustage, dry liivaga P180 - P240 and remove grease/greases again;

Segamissuhe:
MULTI multifunctional Putty–100 massiosa
hardener – 2 massiosa

Serviceable life after hardener segamist:
4 up to 6 minutes 20°C at

drying time:
20 up to 30 minutes at temperature 20 °C
time saab lühendada, hoides 10 minutes at temperature max 60°C.

grinding:
rough P80 - P120
finish P120 - P240

Kaetav:
Polyester finishing putty, polüesterpihusti filler, akrüülkrundid.


mixed components steady paints to obtain properly through. Järgige hardener nõutavaid koguseid; components correct vahekorra to obtain is recommended to use pahtlijaoturit. apply peale pahtlilabidaga layer, which thickness doesn't exceed 5 mm. minimum pealekandmistemperatuur on +10°C.