Vehicle climate system gas leak detector

Available 1pc.
Electronic leak detection systems are capable of finding very small leaks, but with standard models it can be difficult – not to mention time-consuming – to properly install the sensor in certain parts of the air conditioning system. This innovative electronic leak detector has a measuring head on a flexible neck, which makes it easy to reach tight corners and allows you to thoroughly check all parts of the air conditioning system for leaks.

Effective multi-gas leak detector: detects all FC and CFC-based refrigerants and mixtures
Can be programmed to operate in highly contaminated environments (e.g. engine compartment)
Excellent sensitivity and consistent performance throughout the lifetime of the sensor
Microprocessor-controlled sensor electronics with multi-channel signal detection
Meets all relevant international standards including R1234yf for SAE J2913, R134a for SAE J2791 and EN14624:2005.

The sensor detects leaks. Three LEDs indicate the presence of R-1234yf refrigerant. Three LEDs indicate the presence of R-134a refrigerant, all other HFC, HCFC, HFO and CFC gases and gas mixtures (SF6), as well as tracer/former gas (95/5 nitrogen/hydrogen).
Leaks are signaled by a beep of varying pitch through the loudspeaker.
The LED bar graph shows the size of the leak and ensures the exact location of the leak. Four different sensitivity levels can be set for each refrigerant.

Reference number: 8885100124
Ambient temperature: -18° to +60°C (0° to 140°F)
Battery life: approx. 50 hours
Batteries: 3 x Type C
Probe length: approx. 40 cm
Dimensions (L x W x H): 254 x 59 x 51 mm
Weight: 500 g

Accessories (not included) R-134a reference leak 8885100095

The package includes:
1 pc Plastic box
1 pc leak detector
3 pcs Battery 1.5 V, type C
1 pc Sensor nozzle
10 pcs Sensor filter
1 pc sensor nozzle for humid environment (pre-installed)

Manual