induction heater inductor 3 butterfly, voltage: 230v, power: 3.5kw, cooling type: liquid coolant, quantity in package: 1pc

Available 1pc. BUTTERFLY is a revolutionary induction heater used for rapid flameless heating of ferrous metals and aluminum by induction method. Power supply 230V. Power 3.5 kW.

BUTTERFLY is a revolutionary induction heater used for rapid flameless heating of ferrous metals and aluminum by induction method.

Using the principles of electromagnetic induction, it can deliver massive amounts of heat to a specific location in just a few seconds to a depth of up to 4mm. By heating only the selected area, it does not damage glass, rubber or plastic elements or painted surfaces in the immediate vicinity of the heater.

Despite its small size and weight (7 kg), it achieves high output parameters. The built-in liquid cooling system allows you to get 3.5 kW of power for 20 minutes, and the patented nozzle system allows you to quickly change them.

Recommended for all car and commercial vehicle maintenance body work and mechanical repairs. For use in refurbishing and wheel alignment, tire change stations and mechanical workshops. Makes it easier to remove stuck bolts, nuts, pins, bearings and other car parts.

This ensures a reduction in repair time and maximum control of the heating during operation. Unlike a gas burner, an induction heater only heats the metal in a selected place to a temperature of 500-600˚C and does not change the technical properties of the steel.

Power adjustment in 10% increments

Power parameters
Single-phase 230V power supply.

Current 16A
Power supply protection 20A
Nominal supply voltage 230V; 50Hz/60Hz (1ph)
The entire length of the cable is 1.8 m
Tank volume 2.5 liters
Cooling type liquid
Weight 7 kg
Overall dimensions: length x width x height 21x45x26 cm
Continuous working time 20 minutes at maximum power
Frequency 20-60 kHz automatically adjusted
Maximum power 3.5kW
Levels of adjustment 10