Co2/ar reducer with rotameter and 36v heater
Goods available only in e-shop
78,00€
Delivery: home 3-4wd
ADD TO BASKET
Available 1pc.
The CO2 / Ar reducer with rotameter and heater is designed to reduce the technical gas outlet pressure to the required working pressure. The reducing valve maintains a constant discharge pressure regardless of the input pressure.
Physical parameters
The reducer is equipped with a pressure gauge, a rotameter, an adjustment screw, a safety valve and a heater. The high-pressure manometer shows the pressure of the technical gas remaining in the cylinder. The adjusting screw is used to set the gas flow, the rotameter shows its value. The safety valve protects against exceeding the maximum pressure in the outlet chamber. The pre-heater prevents this phenomenon from freezing of the reducer with increased consumption of technical gas.
Power parameters
Power supply 36 V. The device is equipped with a power plug.
Inlet pressure (Mpa) 20
Thread at inlet L 21.8x1/14
At the outlet, screw G 1/4
Hose end 6.3 mm
Throughput (l/min) 25
Gas type Argon/carbon dioxide
Manometer diameter 50 mm
Overall dimensions: length x width x height
165x180x155 mm
The CO2 / Ar reducer with rotameter and heater is designed to reduce the technical gas outlet pressure to the required working pressure. The reducing valve maintains a constant discharge pressure regardless of the input pressure.
Physical parameters
The reducer is equipped with a pressure gauge, a rotameter, an adjustment screw, a safety valve and a heater. The high-pressure manometer shows the pressure of the technical gas remaining in the cylinder. The adjusting screw is used to set the gas flow, the rotameter shows its value. The safety valve protects against exceeding the maximum pressure in the outlet chamber. The pre-heater prevents this phenomenon from freezing of the reducer with increased consumption of technical gas.
Power parameters
Power supply 36 V. The device is equipped with a power plug.
Inlet pressure (Mpa) 20
Thread at inlet L 21.8x1/14
At the outlet, screw G 1/4
Hose end 6.3 mm
Throughput (l/min) 25
Gas type Argon/carbon dioxide
Manometer diameter 50 mm
Overall dimensions: length x width x height
165x180x155 mm
18,90€
ADD TO BASKET
Delivery: home 3-4wd
15,40€
ADD TO BASKET
Delivery: home 3-4wd
46,00€
ADD TO BASKET
Delivery: home 3-4wd