Hazet impact wrench twin turbo 9012att max torque for unscrewing: 550 nm 12.5 mm (1/2'')

Available 2pc. Maximum slack torque [Nm]: 550 Nm ∙ Square 1/2 inch (12.5 mm) ∙ High performance double hammer impact mechanism
Article no: 9012ATT
EAN: 4000896234738
Product information
Area of ​​use:
Use of caliper screw connections and other hard-to-reach screw housings

Maximum slackening torque [Nm]: 550 Nm
The exhaust air flows downwards through the handle
Low vibration
Easy to handle
The handle/trigger is adjustable around its axis for optimal handling and allows working in any position
The swivel mechanism for extended use ensures the best accessibility
Short, compact angular design - only 70 mm
One-handed control for left- and right-handed users
High performance double hammer impact mechanism
Air connection inlet: female thread 12.91 mm (1/4″)
Connection plug: nominal width 7.2 (included)
Recommended torque: 450
Hose diameter (recommended): 10 mm
Working pressure (bar): 6.3
Sound power level (at operating pressure): 101.1 db(A) Lp W
Vibration acceleration: 4.89 m/s2
The loosening torque (max) is determined by screw size M: 16
Turn Right/Left: Single Step (Right/Left)
Cold insulating handle
Output: Square 1/2 inch (12.5 mm)
Dimensions/Length: 85mm x 64mm x 227mm
Net weight (kg): 1.3 kg
For the machine to work
Tightening torque max Nm: 500 Nm
Maximum slackening torque [Nm]: 550 Nm
Sound pressure level (at working pressure): 90.1 dB(A) Lp A
Revolutions per minute: 8000
Air requirement [l/min]: 113 l/min (1.9 l/sec)

TECHNICAL SPECIFICATIONS
Width: 64mm
Striker (Type): High performance double hammer striker
Maximum slackening torque [Nm]: 550 Nm
Tightening torque max Nm: 500 Nm
Dimensions/Length: 85mm x 64mm x 227mm
Sound pressure level (at working pressure): 90.1 dB(A) Lp A
Air requirement [l/min]: 113 l/min
Loosening torque (max) with specified screw size M: 16 M
Height: 227 mm
Turn Right/Left: Single Step (Right/Left)
Sound power level (at operating pressure): 101.1 db(A) Lp W
Handle: cold insulating handle
Manual/Machine Operation: For machine operation
Strength: 3
Recommended torque: 450