k2 gravon set Ceramic pinnakaitsevahend 50ml

Ceramic pinnakaitsevahend which protects surface scratch dirt UV- radiation salts birds väljaheidete saasteainete putukajääkide corrosion and mehaaniliste against damage. due to keraamilisele pinnakattele is not needed car any more to wax. even any more due to suurepärastele isepuhastuvatele omadustele repels this effectively dirt therefore decreases these car nii tihti pesta. Vastupidiselt vahadele is not Ceramic pinnakaitse kemikaalidega detachable. Ainus five cover for removal on masinpoleerimine. Ceramic surface coating protects effectively surface also grafiti and with other värvikahjustuste in front beacuse paint no kinnitu surface and it on light sealt to remove. K2 GRAVON suitable for use also other on surfaces like rubber plastic metal and glass. Ceramic pinnakaitse on hetkel maailmas most tuntum and more durable pinnakaitsevahend which annad surface tunduvalt better protection kui varnish. surface is formed 2-3 mikroni thick Ceramic layer which isoleerib surface fully outer influences eest.

use:

I. optimal kasutustingimused
surrounding air temperature 10 ° C up to 35 ° C. don't use excess moisture conditions.

II. surface ettevalmistamine
wash and dry car thoroughly. surface black be tar, dirt, waxes, pastellide, tehase kaitseta. Et to remove all varnish pooridesse deposited additives, is recommended to use puhastussavi. defects and kriimustustega paint black be grinded with machine, by using for example poleerimismasinaid and K2 Luster pastasid.

III. taotlus
before ceramic cover applying clean surface K2 Klinet silicone remover, by using for example K2 Bona mikrokiudlappi. you can before ceramic cover has been applied apply surface K2 Gravon krunti mehhaanilise Polisher abil, which tugevdab in addition ceramic cover sidumist varnish surface. Ceramic kattekiht can be kantud one hour after polishing. shake the bottle thoroughly and Place the 6-8 tilka to a dry to the wipe, which is packaged aplikaatorisse. Apply cross, one kord surface, which is not bigger kui 50x50 cm. after 1-2 minutes möödumist approximately 20 ° degrees polish surfaces mikrokiudlapiga ( higher temperature lühendab kuivamisaega, lower prolongs). don't let agent paints surface to dry. after esimese layer applying and polishing wait minimum 1 hour and Apply surface veel one layer. ( max durability to ensure use 3 layers).

IV. after using
Leave car seisma with dry spaces minimum 8 tunniks. next 7 days jooksul don't wash car kemikaalidega. cover korrapäraseks for maintenance ( each 3–6 month järel) is recommended to use K2 Gravon Reload'i.