Mannol windshield repair kit

windshield repair set- professional set tuuleklaaside for restoring. unlike other sarnastest toodetest no needed this ultraviolettkiirgust. set põhimõte on to remove laastudelt and pragudelt air and to fill these strong vaiguga, which Changes glass Treated ala senisest even tugevamaks. Parimate tulemuste to achieve tuleks repair teha võimalikult quickly after kahjustust. before lõhenenud or pragunenud ala saastumist.

Features:
- minimizes cracks tekkimise ohtu after in windshield oleva hole or wood chip paranemist and helps prevent their further spreading;
- Ülimadala viscosity high-quality parandusvaik fills usaldusväärselt also most smaller cracks;
- Võimaldab windshield to restore 30-50 minutes jooksul.

application:
1. clean damaged Windscreen puhastuslapiga from dust and dirt. Parimate tulemuste to achieve on recommended to remove klaaspind kiibi around, by using 9691 MANNOL Brake Cleaner.
2. remove damaged alalt klaasikillud a special red knob abil.
3. install liimketas nii, et damaged ala oleks It's keskel.
4. Place the black o-ring liimketta hole servade around. Musti o-rõngaid Can be used many times.
5. Liimige red seenekujuline stand liimiketta peale and Punch torust 2-6 tilka parandusvaiku depending on kahjustuse astmest – what more kiiri on praos and what longer on – it more on needed vaiku. et to fill all these cracks.
6. install syringe seenekujulisele to the base nii, et piston on lõpuni alla surutud. then pull piston nii kaugele kui possible, creating piston alla Vacuum. wait 10 minutes. remove syringe. push piston backward and Place the syringe to the base, then pull piston again out nii kaugele kui possible and wait veel 10 minutes.
7. remove syringe, seenekujuline stand, black ring and kleepketas. if necessary clean glass kleepkettalt with scraper. Parandusvaiku panemiseks ülejäänud damaged piirkondadesse and to the cracks. cover damaged area termoplaadiga peale kantud parandusvaiguga. Silu termoplastid scraper and puhastuslapiga nii, et this sobiks densely against glass and It's alla no jääks õhumulle. remove termoplastide servadelt puhastuslapiga excessive resin. wait 15 minutes.
8. remove termoplaat or kraapige this with scraper ära. also kraapige carefully from a glass dried parandusvaiku.

set contains:
- Remondivaik - 1 pc.
- Kleepplaat - 3 arvutit.
- red mushroom shaped bottom - 1 pc.
- Termoplastid - 5 pc.
- blade scraper - 1 pc.
- Vedruklambriga syringe - 1 PC.
- cleaning cloth - 1 pc.
- red knob - 1 arvuti.
- black o-ring - 2pc.