Trailer Hitch SEAT LEON ST (5F8) 1.6 TDI (66kW / 90hp) 2012 - 2020
| Trailer Hitch | with rigid ball head |
| D-value | 10.3kN |
| Drawb. Ld. | 85kg |
| Tow.Weight | 2,000kg |
| Surface | Cathodic Painting |
| Mounting Time from | 90min |
| Mounting Time up to | 120min |
| Weight | 19kg |
| Similar to picture | |
| Vehicle Equipment | for vehicles with registered axle load |
| Machined | with visible cutout for bumper |
| not for trim level | Cupra |
| Article number of recommended accessories | 405403500001 |
| More information » | |
186,20€
219,10€
-16%
ADD TO BASKET
| Trailer Hitch | with rigid ball head |
| Tow.Weight | 1,800kg |
| Drawb. Ld. | 80kg |
| D-value | 10.2kN |
| Weight | 14.2kg |
| Appr. stamp | 55R |
| Colour | black |
| Machined | with visible cutout for bumper |
| Mounting Time | 1.25Hrs. |
| Construction Year to | 12.2016 |
| Observe mounting information | |
| not for trim level | Cupra, gas installation, X-Perience |
| More information » | |
| Trailer Hitch | with rigid ball head |
| Tow.Weight | 2,000kg |
| Drawb. Ld. | 85kg |
| D-value | 10.3kN |
| Weight | 15.25kg |
| Appr. stamp | 55R |
| Colour | black |
| Machined | with invisible cutout for bumper |
| Mounting Time | 1.25Hrs. |
| Construction Year from | 01.2017 |
| Observe mounting information | |
| not for trim level | gas installation |
| More information » | |
| Trailer Hitch | with rigid ball head, with 13 pin e-set, for vehicles without towbar preparation, E-Set with original plug-in connectors, with automatic parking distance control deactivation, Connector in engine compartment, Cable harness contains steady plus, Cable harness is extendable for charging cable |
| Supplementary Article/Info 2 | Activation required |
| D-value | 10.3kN |
| Drawb. Ld. | 85kg |
| Tow.Weight | 2,000kg |
| Machined | with visible cutout for bumper |
| Mounting Time from | 90min |
| Mounting Time up to | 150min |
| Weight | 21kg |
| Similar to picture | |
| Article number of recommended accessories | 300028300113 |
| not for trim level | Cupra |
| More information » | |
299,90€
352,90€
-16%
ADD TO BASKET
| Trailer Hitch | with removable ball head |
| D-value | 8.7kN |
| Drawb. Ld. | 80kg |
| Tow.Weight | 1,600kg |
| Appr. stamp | ECE7_011431 |
| Mounting Time | 1.5Hrs. |
| Construction Year to | 10.2016 |
| Machined | with invisible cutout for bumper |
| More information » | |
307,80€
ADD TO BASKET
| Trailer Hitch | with rigid ball head, with 13 pin e-set, for vehicles without towbar preparation, E-Set with original plug-in connectors, with automatic parking distance control deactivation, Connector in engine compartment, Cable harness contains steady plus, Cable harness is extendable for charging cable |
| Supplementary Article/Info 2 | Activation required |
| D-value | 10.3kN |
| Drawb. Ld. | 85kg |
| Tow.Weight | 2,000kg |
| Machined | with visible cutout for bumper |
| Mounting Time from | 165min |
| Mounting Time up to | 210min |
| Weight | 21kg |
| Similar to picture | |
| Vehicle Equipment | for vehicles with registered axle load |
| Article number of recommended accessories | 300028300113, 405403500001 |
| Construction Year to | 06.2014 |
| not for trim level | Cupra |
| More information » | |
314,20€
369,60€
-15%
ADD TO BASKET
| Trailer Hitch | with removable ball head, Towball inserted from below |
| D-value | 10.3kN |
| Drawb. Ld. | 85kg |
| Tow.Weight | 2,000kg |
| Surface | Cathodic Painting |
| Mounting Time from | 90min |
| Mounting Time up to | 120min |
| Weight | 19kg |
| Similar to picture | |
| Vehicle Equipment | for vehicles with registered axle load |
| Machined | with visible cutout for bumper |
| not for trim level | Cupra |
| Article number of recommended accessories | 405403500001 |
| More information » | |
334,50€
393,50€
-15%
ADD TO BASKET
| Trailer Hitch | with removable ball head, Vertically removable |
| Tow.Weight | 2,000kg |
| Drawb. Ld. | 85kg |
| D-value | 10.3kN |
| Weight | 19.92kg |
| Appr. stamp | 55R |
| Colour | black |
| Machined | with visible cutout for bumper |
| Mounting Time | 1.25Hrs. |
| Observe mounting information | |
| not for trim level | Cupra, X-Perience |
| More information » | |
| Trailer Hitch | with rigid ball head, with 13 pin e-set, for vehicles without towbar preparation, E-Set with original plug-in connectors, with automatic parking distance control deactivation, Connector in engine compartment, Cable harness contains steady plus, Cable harness contains charger cable |
| Supplementary Article/Info 2 | Activation required |
| D-value | 10.3kN |
| Drawb. Ld. | 85kg |
| Tow.Weight | 2,000kg |
| Machined | with visible cutout for bumper |
| Mounting Time from | 90min |
| Mounting Time up to | 150min |
| Weight | 20kg |
| Similar to picture | |
| Construction Year from | 06.2014 |
| not for trim level | Cupra |
| More information » | |
410,50€
483,00€
-16%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
