OE 06B 906 265E products
AUDI: 06B906265E
AUDI: 06B 906 265 E
AUDI: 06B 906 265E
BENTLEY: 06B906265E
BENTLEY: 06B 906 265 E
GREAT WALL: 06B 906 265 E
LAMBORGHINI: 06B906265E
LAMBORGHINI: 06B 906 265 E
SEAT: 06B906265E
SEAT: 06B 906 265 E
SEAT: 06B 906 265E
SKODA: 06B906265E
SKODA: 06B 906 265 E
VAG: 06B 906 265 E
VAG: 06B906265E
VAG: 06B 906 265E
VW: 06B 906 265 E
VW: 06B906265E
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
$20,10
$23,70
-16%
ADD TO BASKET
| Weight | 0.175kg |
| Number of connectors | 4 |
| Oxygen Sensor | Heated |
| Overall Length | 470mm |
$20,90
$24,60
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor, Thread pre-greased |
| Fabrication Number | ESL-UV-001 |
$21,80
$25,60
-15%
ADD TO BASKET
| Conductor Number | 636conductor |
| Quality | Zr insulated gnd, OE EQUIVALENT |
| for OE No. | 06B906265E |
$24,70
$29,10
-16%
ADD TO BASKET
| Oxygen Sensor | Heated |
$25,50
$30,00
-15%
ADD TO BASKET
| Techn. Info. No. | Universal |
| Overall Length | 325mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Regulating Sensor |
$25,90
$30,40
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.14kg |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$27,00
$31,80
-16%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Number of circuits | 4 |
$29,80
$35,00
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 103g |
| Gross Weight | 152g |
| More information » | |
$30,00
$35,20
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
$30,40
$35,70
-15%
ADD TO BASKET
| Resistor | 4.5Ohm |
| Number of circuits | 4 |
| Length | 1, 320mm |
| Conductor Number | 4conductor |
| Cable Length | 1, 320mm |
| Oxygen Sensor | Heated |
$34,70
$40,80
-15%
ADD TO BASKET
| Cable Length | 909mm |
| Oxygen Sensor | Planar Sensor, Heated |
$35,40
$41,70
-16%
ADD TO BASKET
| Length | 1, 020mm |
| Number of connectors | 4 |
$35,60
$41,90
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Supplementary Article/Info 2 | without plug |
| Number of circuits | 4 |
| Alternative Repair Kit | 570111 |
$35,70
$41,90
-15%
ADD TO BASKET
| Conductor Number | 4conductor |
| Resistor | 9Ohm |
| Length | 800mm |
| Number of circuits | 4 |
| Cable Length | 800mm |
| Oxygen Sensor | Heated |
$37,60
$44,20
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Oxygen Sensor | Diagnostic Probe |
| Voltage | 12V |
| Length | 800mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.15kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$40,40
$47,60
-16%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Number of circuits | 4 |
| Length | 1, 326mm |
$44,50
$52,40
-16%
ADD TO BASKET
| Fitting Position | before catalytic converter |
| Oxygen Sensor | Planar Sensor, Thread pre-greased, Heated |
| Number of pins | 4-pin connector |
| Cable Length | 800mm |
| Thread Size | M18x1, 5 |
| Switch Pressure | 4bar |
| Connector Shape | oval |
| Weight | 0.16kg |
| More information » | |
$49,60
$58,40
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 775mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 06B906265A |
| Quality | OE |
| Weight | 119g |
| Gross Weight | 149g |
| More information » | |
$54,30
$63,90
-16%
ADD TO BASKET
| Fitting Position | before catalytic converter |
| Oxygen Sensor | Planar Sensor, Thread pre-greased, Heated |
| Number of pins | 4-pin connector |
| Cable Length | 720mm |
| Thread Size | M18x1, 5 |
| Switch Pressure | 4bar |
| Connector Shape | oval |
| Weight | 0.159kg |
| More information » | |
$54,80
$64,50
-16%
ADD TO BASKET
| Length | 950mm |
| Number of circuits | 4 |
$57,90
$68,20
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Oxygen Sensor | Heated |
| Number of pins | 4-pin connector |
| Quality | Zr insulated gnd |
| Cable Length | 230mm |
| for OE No. | 030906265BH |
$62,20
$73,20
-16%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Number of pins | 4-pin connector |
| Cable Length | 580mm |
| for OE No. | 466016355265 |
$106,00
$124,70
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
