OE 16806-00QAC products
NISSAN: 1680600QAC
NISSAN: 16806-00QAC
NISSAN: 16806 00QAC
NISSAN: 1680 600 QAC
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
Article number of the recommended special tool | STT-1 |
Tensile Cord Material | Fiberglass |
Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Colour | black |
Number of Teeth | 132 |
Width | 26mm |
Tooth Pitch | 9.525mm |
Length | 1,257mm |
Observe technical data | |
More information » |
14,10€
16,60€
-16%
ADD TO BASKET
Number of tension rollers | 1 |
Belts | without V-belt, without V-ribbed belt |
14,50€
17,00€
-15%
ADD TO BASKET
Number of Teeth | 132 |
Length | 1,257mm |
Width | 26mm |
Tooth Pitch | 9.525mm |
15,90€
18,70€
-15%
ADD TO BASKET
Number of Teeth | 132 |
Width | 26mm |
17,00€
20,00€
-15%
ADD TO BASKET
Width | 26mm |
Number of Teeth | 132 |
Surface | PTFE (Polytetrafluorethylene) coated |
Belts | with rounded tooth profile |
Weight | 0.16kg |
17,90€
21,00€
-15%
ADD TO BASKET
Width | 26mm |
Number of Teeth | 132 |
Surface | PTFE (Polytetrafluorethylene) coated |
Belts | with rounded tooth profile |
Weight | 0.16kg |
18,20€
21,40€
-15%
ADD TO BASKET
Number of Teeth | 132 |
Width | 26mm |
21,10€
24,80€
-15%
ADD TO BASKET
Number of Teeth | 132 |
Packaging length | 25.5cm |
Packaging width | 16cm |
Packaging height | 3cm |
Weight | 0.18kg |
Width | 26mm |
Tooth Pitch | 9.525mm |
More information » |
22,90€
26,90€
-15%
ADD TO BASKET
Number of Teeth 1 | 132 |
Width 1 | 26mm |
Observe service information | |
SVHC | No SVHC present! |
43,00€
50,50€
-15%
ADD TO BASKET
Article number of the recommended special tool | VKN 1008 |
Belt Width | 26mm |
Colour | black |
Number of Teeth | 132 |
Belts | with rounded tooth profile |
47,60€
56,00€
-15%
ADD TO BASKET
oe 7701477048
373 201 7701477048
77014770481
373 201 7701477048
77014770481
Number of Teeth 1 | 132 |
Width 1 | 26mm |
Water Pump Type | for timing belt drive |
65,40€
76,90€
-15%
ADD TO BASKET
Article number of the recommended special tool | VKN 1008 |
Water pump impeller material | Plastic |
Belt Width | 26mm |
Supplementary Article/Supplementary Info | with gaskets/seals |
Number of Teeth | 132 |
Belts | with rounded tooth profile |
74,40€
87,50€
-15%
ADD TO BASKET
Number of Teeth 1 | 132 |
Width 1 | 26mm |
Supplementary Article/Supplementary Info | with water pump |
Observe service information | |
SVHC | No SVHC present! |
75,50€
88,80€
-15%
ADD TO BASKET
Number of Teeth 1 | 132 |
Width 1 | 26mm |
Water Pump Type | for timing belt drive |
76,00€
89,40€
-15%
ADD TO BASKET