OE 36531-PLR-A01 products
ACURA: 36531PLRA01
GREAT WALL: 36531-PLR-A01
HONDA: 36531-PLR-A01
HONDA: 36531PLRA01
HONDA: 36531 PLR A01
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
$20,10
$23,70
-16%
ADD TO BASKET
| Weight | 0.175kg |
| Number of connectors | 4 |
| Oxygen Sensor | Heated |
| Overall Length | 470mm |
$20,90
$24,60
-16%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Length | 535mm |
| Fitting Position | after catalytic converter |
| Fabrication Number | ESL-HD-024 |
$26,30
$30,90
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.14kg |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$27,10
$31,90
-16%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Number of circuits | 4 |
$29,80
$35,00
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
$30,40
$35,70
-15%
ADD TO BASKET
| Number of pins | 4-pin connector |
| Cable Length | 460mm |
| Oxygen Sensor | Heated |
| Assy./disassy. by qualified personnel required! | |
$30,40
$35,80
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 540mm |
| Length | 21.26Inch |
| Number of pins | 4-pin connector |
| Available as universal article as well, see article no. | OS-15P |
| Specification | Isolated Ground, Planar Type, Zirconia Type |
$30,90
$36,30
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor, Thread pre-greased |
| Fabrication Number | ESL-UV-001 |
$30,90
$36,40
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 95g |
| Gross Weight | 139g |
| More information » | |
$33,90
$39,80
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Supplementary Article/Info 2 | without plug |
| Number of circuits | 4 |
| Alternative Repair Kit | 570111 |
$35,70
$41,90
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Length | 740mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.11kg |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$35,80
$42,10
-15%
ADD TO BASKET
| Cable Length | 540mm |
| Oxygen Sensor | Planar Sensor, Heated |
$36,90
$43,30
-15%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe, Heated |
| Voltage | 12V |
| Length | 650mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.14kg |
| Resistor | 13Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$38,00
$44,70
-15%
ADD TO BASKET
| Length | 550mm |
| Number of pins | 4-pin connector |
| Techn. Info. No. | Universal 77004 |
| Oxygen Sensor | Heated |
| Number of circuits | 4 |
| Length | 535mm |
$45,20
$53,20
-16%
ADD TO BASKET
| Number of pins | 4-pin connector |
| Cable Length | 450mm |
| for OE No. | 36531PLRA01 |
$49,60
$58,40
-16%
ADD TO BASKET
| Cable Length | 570mm |
| Conductor Number | 4conductor |
| Supplementary Article/Info 2 | with fastening material |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased |
| Available as universal article as well, see article no. | 10.7007 |
| Number of circuits | 4 |
$51,10
$60,10
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Fitting Position | before catalytic converter |
| Oxygen Sensor | Planar Sensor, Thread pre-greased, Heated |
| Number of pins | 4-pin connector |
| Cable Length | 570mm |
| Thread Size | M18x1, 5 |
| Switch Pressure | 4bar |
| Connector Shape | rectangular |
| Weight | 0.142kg |
| More information » | |
$67,60
$79,50
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
