OE 39210 26610 products
FIAT: 3921026610
HYUNDAI: 39210-26610
HYUNDAI: 3921026610
KIA: 39210 26610
KIA: 3921026610
KIA: 39210-26610
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Weight | 0.113kg |
| Number of connectors | 4 |
| Oxygen Sensor | Regulating Sensor |
| Overall Length | 380mm |
$20,70
$24,40
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Resistor | 9Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$24,10
$28,30
-15%
ADD TO BASKET
| Conductor Number | 636conductor |
| Quality | Zr insulated gnd, OE EQUIVALENT |
| for OE No. | 06B906265E |
$24,70
$29,10
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Resistor | 9Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$28,00
$32,90
-15%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Transmission Type | Manual Transmission |
$30,10
$35,40
-15%
ADD TO BASKET
| Oxygen Sensor | Planar Sensor |
| Number of pins | 4-pin connector |
| Cable Length | 300mm |
| for OE No. | 0258986627 |
$35,90
$42,20
-15%
ADD TO BASKET
| Oxygen Sensor | Heated |
| External Thread Size | M18 x 1.5 |
| Number of connectors | 4 |
| Cable Length | 280mm |
| Weight | 0.11kg |
| Observe service information | |
$40,30
$47,40
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
$42,40
$49,90
-16%
ADD TO BASKET
| Fitting Position | before catalytic converter, after catalytic converter |
| Oxygen Sensor | Planar Sensor, Thread pre-greased, Heated |
| Number of pins | 4-pin connector |
| Cable Length | 400mm |
| Thread Size | M18x1, 5 |
| Switch Pressure | 4bar |
| Connector Shape | rectangular |
| Weight | 0.13kg |
| More information » | |
$45,50
$53,50
-15%
ADD TO BASKET
| Oxygen Sensor | Planar Sensor |
| Number of pins | 4-pin connector |
| Cable Length | 300mm |
| for OE No. | 0258986627 |
$48,30
$56,90
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
$60,90
$65,30
-7%
ADD TO BASKET
| Cable Length | 400mm |
| Conductor Number | 4conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased |
| Available as universal article as well, see article no. | 10.8235 |
| Number of circuits | 4 |
$61,30
$72,10
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
