OE 39210-02900 products
FIAT: 3921002900
HYUNDAI: 39210 02900
HYUNDAI: 3921002900
HYUNDAI: 39210-02900
KIA: 3921002900
KIA: 39210-02900
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Weight | 0.18kg |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Diagnostic Probe |
| Rated Resistance | 9Ohm |
| Overall Length | 540mm |
| Thread Size | M18X1, 5 |
$21,60
$25,30
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Resistor | 9Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$24,10
$28,30
-15%
ADD TO BASKET
| Fitting Position | Front, before catalytic converter, after catalytic converter |
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-HY-508 |
$26,10
$30,70
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Voltage | 12V |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Resistor | 9Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$28,00
$32,90
-15%
ADD TO BASKET
| Oxygen Sensor | Heated |
$28,00
$32,90
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Guarantee | 3 years guarantee |
| Weight | 0.13kg |
| Always compare old and new part (in particular OE No.) | |
$29,00
$34,10
-15%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Transmission Type | Manual Transmission |
$30,10
$35,40
-15%
ADD TO BASKET
| Oxygen Sensor | Heated |
| External Thread Size | M18 x 1, 5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 200mm |
| Weight | 0.1kg |
$34,10
$40,10
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Length | 420mm |
| Conductor Number | 4conductor |
| Resistor | 9Ohm |
| Cable Length | 420mm |
| Oxygen Sensor | Heated |
$35,20
$41,40
-15%
ADD TO BASKET
| Oxygen Sensor | Heated |
| External Thread Size | M18 x 1, 5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 200mm |
| Weight | 0.1kg |
| Observe service information | |
| More information » | |
$35,90
$42,20
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 470mm |
| Number of pins | 4-pin connector |
$35,90
$42,20
-15%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Number of circuits | 4 |
| Cable Length | 400mm |
| SVHC | No SVHC present! |
$39,10
$46,00
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 93g |
| Gross Weight | 140g |
| More information » | |
$41,20
$48,50
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
$42,40
$49,90
-16%
ADD TO BASKET
| Fitting Position | before catalytic converter |
| Oxygen Sensor | Planar Sensor, Thread pre-greased, Heated |
| Number of pins | 4-pin connector |
| Cable Length | 300mm |
| Thread Size | M18x1, 5 |
| Switch Pressure | 4bar |
| Connector Shape | rectangular |
| Weight | 0.13kg |
| More information » | |
$53,20
$62,60
-16%
ADD TO BASKET
| Cable Length | 300mm |
| Conductor Number | 4conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased |
| Available as universal article as well, see article no. | 1.998.235 |
| Number of circuits | 4 |
$54,00
$63,50
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
$60,90
$65,30
-7%
ADD TO BASKET
| Cable Length | 300mm |
| Conductor Number | 4conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased |
| Available as universal article as well, see article no. | 10.8235 |
| Number of circuits | 4 |
$63,30
$74,40
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 400mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 3921002900 |
| Quality | OE |
| Weight | 95g |
| Gross Weight | 128g |
| More information » | |
$64,70
$76,10
-15%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Cable Length | 380mm |
| Number of pins | 4-pin connector |
| Assy./disassy. by qualified personnel required! | |
$72,30
$85,00
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor |
| Number of pins | 4-pin connector |
| Cable Length | 300mm |
| for OE No. | 3921002900 |
$79,70
$93,80
-16%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
