OE 4013A132 products
MITSUBISHI: 4013A132
MITSUBISHI: 4013A132(-)
MITSUBISHI: 4013A132*
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| for OE No. | K04766911AJ |
2,60€
3,00€
-14%
ADD TO BASKET
| Fitting Position | Lower Front Axle, Centre |
| Inner Diameter | 14mm |
| Outer Diameter | 37mm |
| Length | 60mm |
3,80€
4,40€
-14%
ADD TO BASKET
| Fitting Position | Lower, Front Axle Left, Front Axle Right |
| Height | 60mm |
| Inner Diameter | 14mm |
| Outer Diameter | 37mm |
| Control/Trailing Arm Type | Control Arm |
| Mounting Type | Rubber-Metal Mount |
4,70€
5,50€
-15%
ADD TO BASKET
| Fitting Position | Front Axle, Lower |
| Supplementary Article/Supplementary Info | with accessories |
| Cone Size | 20mm |
5,00€
5,80€
-14%
ADD TO BASKET
| Fitting Position | Lower Front Axle, Front |
5,60€
6,50€
-14%
ADD TO BASKET
| Fitting Position | Lower Front Axle |
| Overall Height | 72mm |
| Ø | 40mm |
| Fitted Ø | 20mm |
5,70€
6,60€
-14%
ADD TO BASKET
| Fitting Position | Lower Front Axle |
| Overall Height | 72mm |
| Ø | 40mm |
| Fitted Ø | 20mm |
5,80€
6,80€
-15%
ADD TO BASKET
| Fitting Position | Front, Lower Front Axle |
| Weight | 0.209kg |
| Packaging length | 6.2cm |
| Packaging width | 4cm |
| Packaging height | 4cm |
6,60€
7,70€
-15%
ADD TO BASKET
| Fitting Position | Lower Front Axle |
| Overall Height | 72mm |
| Ø | 40mm |
| Fitted Ø | 20mm |
7,00€
8,20€
-15%
ADD TO BASKET
| Fitting Position | Front Axle |
| Cone Size | 20mm |
7,30€
8,60€
-16%
ADD TO BASKET
| Fitting Position | Lower Front Axle |
| Control/Trailing Arm Type | for control arm |
| Fabrication Number | ZSD-CH-008 |
7,50€
8,80€
-15%
ADD TO BASKET
| Fitting Position | Centre, Lower Front Axle |
| Height | 59.5mm |
| Inner Diameter | 14.2mm |
| Outer Diameter | 37.2mm |
| Control/Trailing Arm Type | Control Arm |
| Mounting Type | Rubber-Metal Mount |
7,70€
9,10€
-16%
ADD TO BASKET
| Ø | 40.1mm |
| Cone Size | 20mm |
| paired article number | 220588 |
| Weight | 0.377kg |
8,40€
9,90€
-16%
ADD TO BASKET
| Ø | 40.1mm |
| Cone Size | 20mm |
9,80€
11,50€
-15%
ADD TO BASKET
| Fitting Position | Lower Front Axle |
| Weight | 0.36kg |
| Packaging length | 7.3cm |
| Packaging width | 4.4cm |
| Packaging height | 4.4cm |
10,50€
12,40€
-16%
ADD TO BASKET
| Fitting Position | Front Axle |
| Ø | 40.1mm |
| Cone Size | 20mm |
| Article number of the recommended special tool | R10080 |
| Observe service information | |
| only with | Circlip |
| Supplementary Article/Info 2 | Requires special tools for mounting |
| More information » | |
10,60€
12,50€
-16%
ADD TO BASKET
| Control/Trailing Arm Type | Control Arm |
| Quantity Unit | Set |
| Fitting Position | Lower, Front Axle Right |
| Cone Size | 20mm |
| Material | Sheet Steel |
| Rod/Strut | Push Rod |
24,80€
29,20€
-16%
ADD TO BASKET
| Fitting Position | Lower, Front Axle Right |
| Control/Trailing Arm Type | Control Arm |
| Supplementary Article/Info 2 | with ball joint, with rubber mount |
| Material | Sheet Steel |
| paired article number | 72-3376 |
27,60€
32,40€
-15%
ADD TO BASKET
| Fitting Position | Front Axle Right, Lower |
| Overall Height | 73mm |
| Fitted Ø | 20mm |
| Inner Diameter | 14mm |
| Inner Diameter 1 | 14mm |
37,50€
44,10€
-15%
ADD TO BASKET
| Fitting Position | Front Axle Right, Lower |
| Overall Height | 73mm |
| Fitted Ø | 20mm |
| Inner Diameter | 14mm |
| Inner Diameter 1 | 14mm |
39,30€
46,20€
-15%
ADD TO BASKET
| Thread Size 1 | Pinch Bolt 20mm |
| Thread Size 2 | Bush Ø14,2 / Ø14,3 m |
| Fitting Position | Right, Lower |
| Material | Sheet Steel |
| paired article number | TC3783 |
| Control/Trailing Arm Type | Trailing Arm |
| Supplementary Article/Info 2 | with ball joint |
| Length | 472mm |
| Width | 404mm |
| Height | 971mm |
| More information » | |
42,70€
50,30€
-16%
ADD TO BASKET
| Fitting Position | Lower, Front Axle Right |
| Cone Size | 20mm |
| Control/Trailing Arm Type | Control Arm |
43,50€
51,20€
-16%
ADD TO BASKET
| Control/Trailing Arm Type | Control Arm |
| Article number of the recommended special tool | J9420000 |
| paired article number | J4905028 |
| SVHC | No SVHC present! |
44,30€
52,10€
-15%
ADD TO BASKET
| Fitting Position | Front Axle Right, Lower |
| Control/Trailing Arm Type | Control Arm |
| Supplementary Article/Info 2 | with rubber mount, with ball joint |
| Material | Sheet Steel |
| replacement in pairs recommended | |
| Quantity required | 1 |
| paired article number | 32-16 050 0060 |
| More information » | |
44,90€
52,80€
-15%
ADD TO BASKET
| Fitting Position | Right Front |
| Weight | 3.87kg |
| Control/Trailing Arm Type | Control Arm |
| Packaging length | 39cm |
| Packaging width | 38.5cm |
| Packaging height | 9cm |
53,10€
62,40€
-15%
ADD TO BASKET
| Fitting Position | Lower, Front Axle Right |
| Cone Size | 20mm |
| Material | Sheet Steel |
| Control/Trailing Arm Type | Control Arm |
| paired article number | 71476 |
| only with | Ball joint |
| Rod/Strut | Push Rod |
| More information » | |
55,50€
65,30€
-16%
ADD TO BASKET
| paired article number | ADC486117 |
| Material | Sheet Steel |
| Control/Trailing Arm Type | Control Arm |
| Fitting Position | Front Axle Right |
| Weight | 4.07kg |
| Supplementary Article/Info 2 | with bearing |
60,20€
70,90€
-16%
ADD TO BASKET
| Cone Size | 20mm |
| Supplementary Article/Info 2 | with ball joint, with rubber mount |
| Material | Steel |
| Length | 337mm |
| Control/Trailing Arm Type | Control Arm |
| as standard | |
| paired article number | 211769 |
| Weight | 3.84kg |
| More information » | |
72,70€
85,50€
-15%
ADD TO BASKET
| paired article number | 41219 |
| Material | Sheet Steel |
| Control/Trailing Arm Type | Control Arm |
| Fitting Position | Front Axle Right |
| Weight | 4.02kg |
| Supplementary Article/Info 2 | with bearing |
73,90€
86,90€
-15%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
