OE 42510-TMC-T00 products
HONDA: 42510TMCT00
HONDA: 42510-TMC-T00
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Brake Disc Type | solid |
| Outer Diameter | 310mm |
| Brake Disc Thickness | 10mm |
| Height | 38.7mm |
| Min. thickness | 8mm |
| Surface | Coated |
| Inner Diameter | 173mm |
| Bolt Hole Circle Ø | 114.3mm |
| Centering Diameter | 64.2mm |
| Hole Pitch/Number | 05/08 |
| Wheel Bolt Bore Ø | 12.6mm |
| Supplementary Article/Info 2 | without wheel hub, without wheel bearing, without wheel studs |
| Packaging length | 32.8cm |
| Packaging width | 32.8cm |
| Packaging height | 10.5cm |
| Weight | 5kg |
| More information » | |
$27.50
$32.40
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Thickness | 10mm |
| Rim | 5-Hole |
| Number of mounting bores | 1 |
| Thickness | 38.7mm |
| Outer Diameter | 310mm |
| Bolt Hole Circle Ø | 114.3mm |
| Brake Disc Type | solid |
| Fitting Position | Rear Axle |
| Min. thickness | 8mm |
| Centering Diameter | 64.2mm |
| More information » | |
$28.80
$33.80
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Outer Diameter | 309.7mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Num. of holes | 5 |
| Bolt Hole Circle Ø | 114.3mm |
| Height | 37.2mm |
| Wheel Hub Ø | 64.2mm |
| Fitting Position | Rear Axle |
| SVHC | No SVHC present! |
| More information » | |
$29.70
$34.90
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Thickness | 10mm |
| Rim | 5-Hole |
| Number of mounting bores | 1 |
| Thickness | 37mm |
| Outer Diameter | 310mm |
| Bolt Hole Circle Ø | 114mm |
| Surface | Coated |
| Brake Disc Type | solid |
| Fitting Position | Rear Axle |
| Min. thickness | 8mm |
| Centering Diameter | 64.2mm |
| Weight | 5kg |
| Observe service information | |
| More information » | |
$33.30
$39.10
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Num. of holes | 6 |
| Appr. stamp | E1 90R-02C0250/2205 |
| Surface | Coated |
| Outer Diameter | 310mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Centering Diameter | 64.2mm |
| Height | 38.7mm |
| More information » | |
$33.60
$39.60
-16%
Sold in pairs
ADD TO BASKET(2)
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
