OE 5Q0 611 775 G products
AUDI: 5Q0611775G
AUDI: 5Q0 611 775 G
AUDI: 5Q0 611 775G
CUPRA: 5Q0611775G
CUPRA: 5Q0 611 775 G
SEAT: 5Q0611775G
SEAT: 5Q0 611 775 G
SEAT: 5Q0 611 775G
SKODA: 5Q0611775G
SKODA: 5Q0 611 775 G
SKODA: 5Q0 611 775G
VAG: 5Q0 611 775G
VAG: 5Q0 611 775 G
VAG: 5Q0611775G
VW: 5Q0611775G
VW: 5Q0 611 775 G
VW: 5Q0 611 775G
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Fitting Position | Rear Axle |
| Length | 287mm |
5,70€
6,70€
-15%
ADD TO BASKET
| Length | 295mm |
| Fitting Position | Rear Axle |
6,30€
7,40€
-15%
ADD TO BASKET
| Fitting Position | 1st rear axle left, 1st rear axle right |
| Length | 276mm |
6,50€
7,60€
-15%
ADD TO BASKET
| Fitting Position | Rear |
6,70€
7,90€
-16%
ADD TO BASKET
| Length | 295mm |
| Thread Size 1 | INN M10x 1.0 |
| Thread Size 2 | BANJO 10.0mm |
| Weight | 0.14kg |
8,40€
9,90€
-16%
ADD TO BASKET
| Length | 234mm |
| Thread Size 1 | M10x1 |
| Thread Type | with internal thread, with external thread |
| Thread Size 2 | M10x1,5 |
| Supplementary Article/Info 2 | with banjo bolt, with washers |
8,50€
10,00€
-15%
ADD TO BASKET
| Length | 287mm |
| Thread Size 1 | F10x1 |
| Thread Size 2 | M10x1,5 |
| Net weight | 0.01kg |
8,60€
10,10€
-15%
ADD TO BASKET
| Length | 245mm |
| Internal Thread Size | M10 x 1 |
| Thread Length | 10.2mm |
| Fitting Position | Rear Axle Left, Rear Axle Right |
| Weight | 0.111kg |
8,90€
10,40€
-15%
ADD TO BASKET
| Fitting Position | Rear |
10,90€
12,80€
-15%
ADD TO BASKET
11,30€
13,30€
-16%
ADD TO BASKET
| Length | 245mm |
| Thread Size 1 | M10x1 |
| Thread Type | Internal Thread |
| Thread Size 2 | Banjo |
| SVHC | No information available, please contact the manufacturer! |
11,40€
13,40€
-15%
ADD TO BASKET
| Length | 234mm |
| Internal Thread 1 | M10x1mm |
12,60€
14,90€
-16%
ADD TO BASKET
| Length | 300mm |
| Flange Hole Diameter | 10mm |
| Supplementary Article/Info 2 | with banjo bolt |
| Thread Size | M10x1,5 |
| Internal Thread | M10x1mm |
| MAPP code available | |
| Spanner size 1 | 11mm |
| Spanner size 2 | 17mm |
| More information » | |
14,10€
16,50€
-15%
ADD TO BASKET
| Thread Size 1 | F10x1 |
| Thread Size 2 | Banjo |
| Total Length | 290mm |
21,50€
25,30€
-16%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
