OE 95526658 products
CHEVROLET: 95526658
GENERAL MOTORS: 95526658
OPEL: 95526658
OPEL: 95 526 658
VAUXHALL: 95526658
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Height | 42mm |
| Brake Disc Type | solid |
| Min. thickness | 8mm |
| Brake Disc Thickness | 10mm |
| Num. of holes | 5 |
| Centering Diameter | 65.5mm |
| Outer Diameter | 264mm |
| More information » | |
$13,50
$15,90
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Thickness | 10mm |
| Rim | 5-Hole |
| Brake Disc Type | solid |
| Outer Diameter | 264mm |
| Centering Diameter | 65mm |
| Height | 42mm |
| Alternatively | |
| More information » | |
$14,50
$17,10
-16%
Sold in pairs
ADD TO BASKET(2)
| Height | 42mm |
| Outer Diameter | 264mm |
| Brake Disc Type | solid |
| Min. thickness | 8mm |
| Centering Diameter | 65.5mm |
| Brake Disc Thickness | 10mm |
| Num. of holes | 5 |
| More information » | |
$14,50
$17,10
-16%
Sold in pairs
ADD TO BASKET(2)
| Fitting Position | Rear Axle |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Bolt Hole Circle Ø | 110mm |
| Num. of holes | 5 |
| Height | 42mm |
| Centering Diameter | 65mm |
| Surface | Coated |
| Outer Diameter | 264mm |
| More information » | |
$15,10
$17,80
-16%
Sold in pairs
ADD TO BASKET(2)
| Fitting Position | Rear Axle |
| Brake Disc Type | solid |
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Num. of holes | 5 |
| Surface | Coated |
$15,40
$18,10
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Surface | Coated |
| Brake Disc Type | solid |
| Outer Diameter | 264mm |
| Centering Diameter | 65.5mm |
| Num. of holes | 5 |
| Height | 42mm |
| More information » | |
$15,80
$18,50
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Height | 42mm |
| Bolt Hole Circle Ø | 110mm |
| Centering Diameter | 65.5mm |
| Num. of holes | 5 |
| Surface | Coated |
| Min. thickness | 8mm |
| Number of bores | 1 |
| More information » | |
$16,00
$18,80
-15%
Sold in pairs
ADD TO BASKET(2)
| Rim | 5-Hole |
| Height | 42.3mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Outer Diameter | 264mm |
| Centering Diameter | 65.5mm |
| Bolt Hole Circle Ø | 110mm |
| More information » | |
$16,10
$18,90
-15%
Sold in pairs
ADD TO BASKET(2)
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Height | 42mm |
| Rim | 5-Hole |
| Brake Disc Type | solid |
| Centering Diameter | 66mm |
| Bolt Hole Circle Ø | 110mm |
| Hub Ø | 155mm |
| Weight | 3.65kg |
| More information » | |
$16,60
$19,50
-15%
Sold in pairs
ADD TO BASKET(2)
| Fitting Position | Rear Axle |
| Outer Diameter | 264mm |
| Height | 42mm |
| Brake Disc Thickness | 9.8mm |
| Min. thickness | 8mm |
| Centering Diameter | 65.5mm |
| Bolt Hole Circle Ø | 110mm |
| Wheel Bolt Bore Ø | 14mm |
| Num. of holes | 5 |
| Brake Disc Type | solid |
| Quantity required | 2 |
| More information » | |
$17,00
$20,00
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Num. of holes | 5 |
| Appr. stamp | E4 90R-02C0747/2816 |
| Surface | Oiled |
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Centering Diameter | 65.5mm |
| Height | 42mm |
| More information » | |
$17,40
$20,40
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Surface | Galvanically coated |
| Fitting Position | Rear Axle |
| Outer Diameter | 264mm |
| Inner Diameter | 145mm |
| Centering Diameter | 65.5mm |
| Height | 42mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Num. of holes | 5 |
| Thread Size | 14, 3 |
| No. of holes 1 | 1 |
| Bore Distance 1 | 106mm |
| Weight | 3.7kg |
| Bolt Hole Circle Ø | 110mm |
| More information » | |
$17,40
$20,40
-15%
Sold in pairs
ADD TO BASKET(2)
| Height | 42mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Number of bores | 1 |
| Outer Diameter | 264mm |
| Num. of holes | 5 |
| Centering Diameter | 65.5mm |
| Bolt Hole Circle Ø | 110mm |
| Surface | Coated |
| More information » | |
$18,60
$21,90
-16%
Sold in pairs
ADD TO BASKET(2)
| Thickness | 10mm |
| Height | 42mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Num. of holes | 5 |
| Centering Diameter | 65mm |
| Outer Diameter | 264mm |
| Fitting Position | Rear Axle |
| More information » | |
$18,90
$22,20
-15%
Sold in pairs
ADD TO BASKET(2)
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Brake Disc Type | solid |
| Min. thickness | 8mm |
| Height | 42mm |
| Bolt Hole Circle Ø | 110mm |
| Centering Diameter | 65.5mm |
| Supplementary Article/Info 2 | without wheel hub, without wheel studs |
| Surface | painted |
| Num. of holes | 5 |
| More information » | |
$19,30
$22,70
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Height | 42mm |
| Centering Diameter | 65.5mm |
| Number of mounting bores | 5 |
| Surface | Coated |
| Weight | 3.59kg |
| Min. thickness | 8mm |
| More information » | |
$19,70
$23,20
-16%
Sold in pairs
ADD TO BASKET(2)
| Outer Diameter | 264mm |
| Height | 42mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Num. of holes | 5 |
| Surface | painted |
| Fitting Position | Rear Axle |
| Tightening Torque | 110Nm |
| More information » | |
$19,80
$23,30
-16%
Sold in pairs
ADD TO BASKET(2)
| Fitting Position | Rear Axle |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Outer Diameter | 264mm |
| Weight | 3.76kg |
| Height | 42.3mm |
| Num. of holes | 5 |
| Bolt Hole Circle Ø | 110mm |
| Centering Diameter | 65.5mm |
| Surface | Coated |
| Min. thickness | 8mm |
| Drill Ø, up to | 14.1mm |
| More information » | |
$19,90
$23,40
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Height | 42mm |
| Min. thickness | 8mm |
| Surface | Coated |
| Inner Diameter | 145mm |
| Bolt Hole Circle Ø | 110mm |
| Centering Diameter | 65.5mm |
| Hole Pitch/Number | 05/06 |
| Wheel Bolt Bore Ø | 14.2mm |
| Supplementary Article/Info 2 | without wheel hub, without wheel bearing, without wheel studs |
| Packaging length | 29.3cm |
| Packaging width | 29.3cm |
| Packaging height | 6.5cm |
| Weight | 3.7kg |
| More information » | |
$20,90
$24,60
-16%
Sold in pairs
ADD TO BASKET(2)
| Rim | 5-Hole |
| Fitting Position | Rear Axle |
| Height | 42mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Outer Diameter | 264mm |
| Num. of holes | 1 |
| Centering Diameter | 65.5mm |
| More information » | |
$21,40
$25,10
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Num. of holes | 5 |
| Supplementary Article/Info 2 | with bolts/screws |
| Height | 42mm |
| Centering Diameter | 65mm |
| Outer Diameter | 264mm |
| Surface | Coated |
| Min. thickness | 8mm |
| Tightening Torque | 110Nm |
| More information » | |
$21,60
$25,40
-15%
Sold in pairs
ADD TO BASKET(2)
| Fitting Position | Rear Axle |
| Outer Diameter | 264mm |
| Height | 42mm |
| Brake Disc Thickness | 9.8mm |
| Min. thickness | 8mm |
| Centering Diameter | 65.5mm |
| Bolt Hole Circle Ø | 110mm |
| Wheel Bolt Bore Ø | 14mm |
| Num. of holes | 5 |
| Brake Disc Type | solid |
| Surface | Zink flake coated |
| Supplementary Article/Info 2 | with bolts/screws |
| Quality | PREMIUM |
| Quantity required | 2 |
| More information » | |
$21,70
$25,60
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Surface | Coated |
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Height | 42mm |
| Rim | 5-Hole |
| Bolt Hole Circle Ø | 110mm |
| Centering Diameter | 66mm |
| Appr. stamp | ECE R90 APPROVED |
| Min. thickness | 8mm |
| Weight | 3.7kg |
| Hole Pitch/Number | 6/5 |
| More information » | |
$21,90
$25,70
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Supplementary Article/Info 2 | with bolts/screws |
| Height | 42mm |
| Centering Diameter | 65mm |
| Num. of holes | 5 |
| Quantity Unit | Piece |
| Surface | Coated |
| Weight | 3.76kg |
| Min. thickness | 8mm |
| Tightening Torque | 110Nm |
| Packaging length | 25.5cm |
| Packaging width | 25.5cm |
| Packaging height | 8.5cm |
| More information » | |
$23,70
$27,90
-16%
Sold in pairs
ADD TO BASKET(2)
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 7mm |
| Height | 42mm |
| Rim | 5-Hole |
| Brake Disc Type | solid |
| Centering Diameter | 65.5mm |
| Surface | Coated |
| Net weight | 3.71kg |
| More information » | |
$23,80
$28,00
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Height | 42mm |
| Min. thickness | 8mm |
| Surface | Coated |
| Inner Diameter | 145mm |
| Bolt Hole Circle Ø | 110mm |
| Centering Diameter | 65.5mm |
| Hole Pitch/Number | 05/06 |
| Wheel Bolt Bore Ø | 14.2mm |
| Supplementary Article/Info 2 | without wheel hub, without wheel bearing, without wheel studs |
| Packaging length | 27.8cm |
| Packaging width | 27.8cm |
| Packaging height | 10.5cm |
| Weight | 3.7kg |
| More information » | |
$24,20
$28,40
-15%
Sold in pairs
ADD TO BASKET(2)
| Outer Diameter | 264mm |
| Brake Disc Thickness | 9.8mm |
| Min. thickness | 8mm |
| Brake Disc Type | solid |
| Num. of holes | 5 |
| Surface | Coated |
| Bolt Hole Circle Ø | 110mm |
| Height | 42mm |
| Centering Diameter | 65.5mm |
| Inner Diameter | 145mm |
| Bore Ø | 14mm |
| Supplementary Article/Info 2 | with bolts/screws |
| MAPP code available | |
| Appr. stamp | E1 90R-02C0165/0694 |
| More information » | |
$25,30
$29,80
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid, slotted |
| Brake Disc Thickness | 10mm |
| Num. of holes | 5 |
| Supplementary Article/Info 2 | with bolts/screws |
| Height | 42mm |
| Centering Diameter | 65mm |
| Outer Diameter | 264mm |
| Surface | Coated |
| Min. thickness | 8mm |
| Tightening Torque | 110Nm |
| More information » | |
$29,20
$34,40
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid, Perforated |
| Surface | Galvanically coated |
| Fitting Position | Rear Axle |
| Outer Diameter | 264mm |
| Inner Diameter | 145mm |
| Centering Diameter | 65.5mm |
| Height | 42mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Num. of holes | 5 |
| Thread Size | 14, 3 |
| No. of holes 1 | 1 |
| Bore Distance 1 | 106mm |
| Weight | 3.7kg |
| Bolt Hole Circle Ø | 110mm |
| More information » | |
$29,40
$34,60
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | solid |
| Outer Diameter | 264mm |
| Brake Disc Thickness | 10mm |
| Supplementary Article/Info 2 | with bolts/screws |
| Height | 42mm |
| Bolt Hole Circle Ø | 110mm |
| Centering Diameter | 65mm |
| Num. of holes | 5 |
| Quantity Unit | Set |
| Surface | Coated |
| Version | JC |
| Weight | 7.52kg |
| Min. thickness | 8mm |
| Tightening Torque | 110Nm |
| Packing Type | Carton |
| Packaging length | 28cm |
| Packaging width | 28cm |
| Packaging height | 15cm |
| More information » | |
$30,60
$36,00
-15%
Sold in pairs
ADD TO BASKET(2)
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
