OE SDB500150 products
LAND ROVER: SDB500150
LAND ROVER: SDB 500150
LAND ROVER: SDB 500 150
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Height | 59.5mm |
| Centering Diameter | 79mm |
| Num. of holes | 5 |
| Min. thickness | 17mm |
| Brake Disc Type | Vented |
| Fitting Position | Rear Axle |
| More information » | |
$28,50
$33,50
-15%
Sold in pairs
ADD TO BASKET(2)
| Min. thickness | 18mm |
| Brake Disc Thickness | 20mm |
| Brake Disc Type | internally vented |
| Centering Diameter | 78.9mm |
| Num. of holes | 5 |
| Outer Diameter | 325mm |
| Height | 59.7mm |
| More information » | |
$30,00
$35,30
-16%
Sold in pairs
ADD TO BASKET(2)
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Min. thickness | 17mm |
| Height | 59.5mm |
| Rim | 5-Hole |
| Brake Disc Type | Vented |
| Centering Diameter | 79mm |
| Bolt Hole Circle Ø | 120mm |
| Surface | Coated |
| Hub Ø | 211mm |
| Weight | 7.54kg |
| More information » | |
$35,10
$41,30
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Thickness | 20mm |
| Rim | 5-Hole |
| Thickness | 59mm |
| Outer Diameter | 325mm |
| Bolt Hole Circle Ø | 120mm |
| Surface | Coated |
| Brake Disc Type | internally vented |
| Fitting Position | Rear Axle |
| Min. thickness | 17mm |
| Centering Diameter | 79mm |
| Weight | 7.7kg |
| Observe service information | |
| More information » | |
$36,40
$42,90
-16%
Sold in pairs
ADD TO BASKET(2)
| Fitting Position | Rear Axle |
| Brake Disc Type | internally vented |
| Brake Disc Thickness | 20mm |
| Outer Diameter | 325mm |
| Height | 59mm |
| Bolt Hole Circle Ø | 120mm |
| Centering Diameter | 79mm |
| Surface | Coated |
| Rim | 5-Hole |
| More information » | |
$36,50
$42,90
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Thickness | 20mm |
| Rim | 5-Hole |
| Thickness | 59mm |
| Outer Diameter | 325mm |
| Bolt Hole Circle Ø | 120mm |
| Surface | Coated |
| Brake Disc Type | internally vented |
| Fitting Position | Rear Axle |
| Min. thickness | 17mm |
| Centering Diameter | 79mm |
| Weight | 8.35kg |
| Observe service information | |
| More information » | |
$37,00
$43,50
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Thickness | 20mm |
| Rim | 5-Hole |
| Thickness | 59mm |
| Outer Diameter | 325mm |
| Bolt Hole Circle Ø | 120mm |
| Surface | Coated |
| Brake Disc Type | internally vented |
| Fitting Position | Rear Axle |
| Min. thickness | 17mm |
| Centering Diameter | 79mm |
| Weight | 7.7kg |
| More information » | |
$38,40
$45,20
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | internally vented |
| Brake Disc Thickness | 20mm |
| Num. of holes | 5 |
| Height | 59mm |
| Centering Diameter | 79mm |
| Outer Diameter | 325mm |
| Machining | High-carbon |
| Surface | Coated |
| Min. thickness | 17mm |
| Tightening Torque | 140Nm |
| More information » | |
$38,50
$45,30
-16%
Sold in pairs
ADD TO BASKET(2)
| Fitting Position | Rear Axle |
| Bolt Hole Circle Ø | 79mm |
| Height | 60mm |
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Min. thickness | 18mm |
| Number of bores | 5 |
| Brake Disc Type | Vented |
| Surface | painted |
| Tightening Torque | 140Nm |
| More information » | |
$40,20
$47,30
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | Vented |
| Num. of holes | 5 |
| Appr. stamp | E1 90R-02C0460/1466 |
| Surface | Coated |
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Min. thickness | 17mm |
| Centering Diameter | 79mm |
| Height | 59.5mm |
| More information » | |
$41,80
$49,20
-16%
Sold in pairs
ADD TO BASKET(2)
| Fitting Position | Rear Axle |
| Bolt Hole Circle Ø | 79mm |
| Height | 60mm |
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Min. thickness | 18mm |
| Number of bores | 5 |
| Brake Disc Type | Vented |
| Surface | painted |
| Tightening Torque | 140Nm |
| More information » | |
$42,40
$49,90
-16%
Sold in pairs
ADD TO BASKET(2)
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Min. thickness | 17mm |
| Height | 59.5mm |
| Bolt Hole Circle Ø | 120mm |
| Brake Disc Type | Vented |
| Centering Diameter | 79mm |
| Num. of holes | 5 |
| Surface | Coated |
| fulfils ECE norm | ECE-R90 |
| Drill Ø, up to | 15mm |
| More information » | |
$43,30
$50,90
-15%
Sold in pairs
ADD TO BASKET(2)
| Centering Diameter | 79mm |
| Thread Size | 15 |
| Bolt Hole Circle Ø | 120mm |
| Min. thickness | 17mm |
| Brake Disc Type | Vented |
| Brake Disc Thickness | 20mm |
| Num. of holes | 5 |
| Height | 59mm |
| Colour | black |
| Surface | painted |
| Fitting Position | Rear Axle |
| Outer Diameter | 354mm |
| Machining | Alloyed/High-carbon, High-carbon |
| Inner Diameter | 210mm |
| More information » | |
$44,10
$51,90
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | Externally Vented |
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Height | 59mm |
| Min. thickness | 17mm |
| Surface | Coated |
| Inner Diameter | 210mm |
| Bolt Hole Circle Ø | 120mm |
| Centering Diameter | 79mm |
| Hole Pitch/Number | 05/07 |
| Wheel Bolt Bore Ø | 15mm |
| Supplementary Article/Info 2 | without wheel hub, without wheel bearing, without wheel studs |
| Packaging length | 34.3cm |
| Packaging width | 34.3cm |
| Packaging height | 7.5cm |
| Weight | 7.7kg |
| More information » | |
$44,30
$52,10
-15%
Sold in pairs
ADD TO BASKET(2)
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Min. thickness | 18mm |
| Height | 59.7mm |
| Rim | 5-Hole |
| Brake Disc Type | Vented |
| Centering Diameter | 78.9mm |
| Surface | Coated |
| Net weight | 7.7kg |
| More information » | |
$44,30
$52,10
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | Externally Vented |
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Height | 59mm |
| Min. thickness | 17mm |
| Surface | Coated |
| Inner Diameter | 210mm |
| Bolt Hole Circle Ø | 120mm |
| Centering Diameter | 79mm |
| Hole Pitch/Number | 05/07 |
| Wheel Bolt Bore Ø | 15mm |
| Supplementary Article/Info 2 | without wheel hub, without wheel bearing, without wheel studs |
| Packaging length | 34.3cm |
| Packaging width | 34.3cm |
| Packaging height | 14.5cm |
| Weight | 7.7kg |
| More information » | |
$46,50
$54,80
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | Externally Vented |
| Machining | High-carbon |
| Surface | Coated |
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Height | 60mm |
| Rim | 5-Hole |
| Bolt Hole Circle Ø | 120mm |
| Centering Diameter | 79mm |
| Appr. stamp | ECE R90 APPROVED |
| Min. thickness | 17mm |
| Weight | 7.7kg |
| Hole Pitch/Number | 7/5 |
| More information » | |
$47,00
$55,30
-16%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | internally vented |
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Height | 59.5mm |
| Bolt Hole Circle Ø | 120mm |
| Centering Diameter | 79mm |
| Num. of holes | 5 |
| Surface | Coated |
| Min. thickness | 17mm |
| Number of bores | 2 |
| More information » | |
$47,80
$56,20
-15%
Sold in pairs
ADD TO BASKET(2)
| Centering Diameter | 79mm |
| Thread Size | 15 |
| Bolt Hole Circle Ø | 120mm |
| Min. thickness | 17mm |
| Brake Disc Type | Vented |
| Brake Disc Thickness | 20mm |
| Outer Diameter | 325mm |
| Num. of holes | 5 |
| Height | 59mm |
| Colour | black |
| Surface | painted |
| Machining | High-carbon |
| SVHC | No information available, please contact the manufacturer! |
| More information » | |
$49,90
$58,70
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | Externally Vented |
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Height | 59mm |
| Min. thickness | 17mm |
| Surface | Coated |
| Bolt Hole Circle Ø | 120mm |
| Centering Diameter | 79mm |
| Hole Pitch/Number | 05/07 |
| Supplementary Article/Info 2 | without wheel hub, without wheel studs |
| Weight | 7.7kg |
| Assy./disassy. by qualified personnel required! | |
| More information » | |
$51,60
$60,60
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | Vented |
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Supplementary Article/Info 2 | without bolts/screws |
| Height | 59mm |
| Bolt Hole Circle Ø | 120mm |
| Centering Diameter | 79mm |
| Num. of holes | 5 |
| Quantity Unit | Set |
| Surface | Coated |
| Version | JC |
| Weight | 15.91kg |
| Min. thickness | 17mm |
| Hole Pitch/Number | 5+1+1 |
| Tightening Torque | 140Nm |
| Packing Type | Carton |
| Packaging length | 34.5cm |
| Packaging width | 34.5cm |
| Packaging height | 14cm |
| More information » | |
$58,20
$68,50
-16%
Sold in pairs
ADD TO BASKET(2)
| Centering Diameter | 79mm |
| Thread Size | 15 |
| Bolt Hole Circle Ø | 120mm |
| Min. thickness | 17mm |
| Brake Disc Type | Vented |
| Brake Disc Thickness | 20mm |
| Num. of holes | 5 |
| Height | 59mm |
| Colour | black |
| Surface | painted |
| Fitting Position | Rear Axle |
| Outer Diameter | 354mm |
| More information » | |
$63,50
$74,70
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | Externally Vented, Perforated |
| Machining | High-carbon |
| Surface | Coated |
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Height | 60mm |
| Rim | 5-Hole |
| Bolt Hole Circle Ø | 120mm |
| Centering Diameter | 79mm |
| Appr. stamp | KBA 60872 |
| Min. thickness | 17mm |
| Weight | 7.7kg |
| Hole Pitch/Number | 7/5 |
| More information » | |
$84,00
$98,80
-15%
Sold in pairs
ADD TO BASKET(2)
| Brake Disc Type | Vented |
| Outer Diameter | 325mm |
| Brake Disc Thickness | 20mm |
| Supplementary Article/Info 2 | without bolts/screws |
| Height | 59mm |
| Bolt Hole Circle Ø | 120mm |
| Centering Diameter | 79mm |
| Num. of holes | 5 |
| Quantity Unit | Set |
| Surface | Oiled |
| Weight | 15.91kg |
| Min. thickness | 17mm |
| Tightening Torque | 140Nm |
| Packing Type | Carton |
| Packaging length | 32cm |
| Packaging width | 32cm |
| Packaging height | 14cm |
| More information » | |
$108,00
$127,10
-16%
Sold in pairs
ADD TO BASKET(2)
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
