Timing Belt / Tensioner / Guide AUDI A6 C8 (4A2) 40 TDI (140kW / 190hp) 2018 - ...
| Length | 30mm |
| Width | 30mm |
| Height | 30mm |
| Weight | 0.07kg |
$7,20
$8,40
-15%
ADD TO BASKET
| Width of castor bearing surface | 29mm |
| Width | 29mm |
| Inner Diameter | 8mm |
| Outer Diameter | 28mm |
| Material | Metal |
| Weight | 0.074kg |
$7,30
$8,60
-16%
ADD TO BASKET
| Outer Diameter | 28mm |
| Inner Diameter | 8mm |
| Width | 29mm |
$7,30
$8,60
-16%
ADD TO BASKET
| Outer Diameter 1 | 28mm |
| Width 1 | 29mm |
$9,00
$10,60
-16%
ADD TO BASKET
| Ø | 29mm |
| Width | 29mm |
| Fitting Position | Lower Left |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT4844, GAT5170, GAT5247 |
$9,00
$10,60
-16%
ADD TO BASKET
| Surface | Smooth |
| Material | Metal |
| Outer Diameter | 29mm |
| Inner Diameter | 8mm |
| Width | 29mm |
| Driven units | Camshaft |
$9,10
$10,60
-15%
ADD TO BASKET
| Outer Diameter 1 | 40mm |
| Width 1 | 29mm |
$10,90
$12,90
-16%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Engine Timing | Timing belt in the oil bath |
| Colour | black/white |
| Number of Teeth | 53 |
| Width | 10.2mm |
| Tooth Pitch | 8.959mm |
| Length | 475mm |
| Driven units | Oil Pump |
| More information » | |
$11,40
$13,40
-15%
ADD TO BASKET
| Width of castor bearing surface | 28mm |
| Width | 28mm |
| Inner Diameter | 8mm |
| Outer Diameter | 40mm |
| Material | Metal |
| Weight | 0.21kg |
$11,80
$13,80
-15%
ADD TO BASKET
| Ø | 40mm |
| Width | 29mm |
| Fitting Position | Upper |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT4844, GAT5170, GAT5247 |
$13,10
$15,40
-15%
ADD TO BASKET
| Surface | Smooth |
| Material | Metal |
| Outer Diameter | 40mm |
| Inner Diameter | 8mm |
| Width | 29mm |
| Driven units | Camshaft |
$13,30
$15,60
-15%
ADD TO BASKET
| Width | 28.5mm |
| Weight | 0.21kg |
| Quantity required | 1 |
| Material | Metal |
| Inner Diameter | 8mm |
| Outer Diameter | 40mm |
$14,70
$17,20
-15%
ADD TO BASKET
| Weight | 0.27kg |
| Outer Diameter | 56mm |
| Packaging length | 7.6cm |
| Packaging width | 6.6cm |
| Packaging height | 6.6cm |
$15,70
$18,50
-16%
ADD TO BASKET
| Width | 10mm |
| Number of Teeth | 53 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
| Weight | 0.023kg |
| Units/pulleys | Oil Pump |
$24,20
$28,40
-15%
ADD TO BASKET
| Height | 51mm |
| Outer Diameter | 79mm |
$26,40
$31,10
-16%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Colour | black |
| Number of Teeth | 145 |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Length | 1, 381mm |
| Driven units | Camshaft |
| More information » | |
$28,60
$33,60
-15%
ADD TO BASKET
$28,80
$33,90
-16%
ADD TO BASKET
| Number of Teeth | 145 |
| Length | 1, 381mm |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Supplementary Article/Info 2 | not for dusty operating conditions |
| Driven units | Water Pump |
$30,10
$35,40
-15%
ADD TO BASKET
| Width | 10mm |
| Number of Teeth | 53 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
| Units/pulleys | Oil Pump |
$30,10
$35,40
-15%
ADD TO BASKET
| Width | 25mm |
| Number of Teeth | 145 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
| Weight | 0.17kg |
| Observe service information | |
$30,10
$35,50
-16%
ADD TO BASKET
| Belt Width | 25mm |
| Belt Material | PTFE (polytetrafluoroethylene) |
| Colour | black |
| Number of Teeth | 145 |
| Belts | with rounded tooth profile |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT4844, GAT5170, GAT5247 |
| More information » | |
$67,30
$79,20
-16%
ADD TO BASKET
| Width | 25mm |
| Number of Teeth | 145 |
| Belts | with rounded tooth profile |
| Weight | 1.057kg |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| for OE No. | 04L 109 119 D S8 |
| Observe service information | |
| More information » | |
$70,70
$83,10
-15%
ADD TO BASKET
| Number of Teeth | 145 |
| Length | 1, 381mm |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Driven units | Water Pump |
$88,30
$103,90
-16%
ADD TO BASKET
| Water Pump Type | for timing belt drive |
| Width | 25mm |
| Water pump impeller material | Plastic |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Supplementary Article/Info 2 | non-switchable water pump |
| Number of Teeth | 145 |
| Belts | with rounded tooth profile |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT5247, GAT5170, GAT4844 |
| More information » | |
$103,70
$122,00
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | without water pump |
| Observe technical data | |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT5170, GAT5247, GAT4844 |
$105,00
$123,60
-16%
ADD TO BASKET
| Water pump impeller material | Plastic |
| Number of Teeth | 145 |
| Belts | with rounded tooth profile |
| Weight | 2.007kg |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| for OE No. | 04L 109 119 D S10 |
$110,10
$129,50
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with water pump |
| Observe technical data | |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT5170, GAT5247, GAT4844 |
$153,80
$180,90
-15%
ADD TO BASKET
| Supplementary Article/Info 2 | with integrated disabling contact, switchable water pump |
| Supplementary Article/Supplementary Info | with water pump |
| Observe technical data | |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT5170, GAT5247, GAT4844 |
$223,00
$262,30
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
