Timing belt and water pump kit AUDI A6 C8 (4A2) 40 TDI (140kW / 190hp) 2018 - ...
Previous 1 2 Next
| Length | 30mm |
| Width | 30mm |
| Height | 30mm |
| Weight | 0.07kg |
$7,20
$8,50
-16%
ADD TO BASKET
| Outer Diameter | 28mm |
| Inner Diameter | 8mm |
| Width | 29mm |
$7,30
$8,60
-16%
ADD TO BASKET
| Width of castor bearing surface | 29mm |
| Width | 29mm |
| Inner Diameter | 8mm |
| Outer Diameter | 28mm |
| Material | Metal |
| Weight | 0.074kg |
$7,30
$8,60
-16%
ADD TO BASKET
| Outer Diameter 1 | 28mm |
| Width 1 | 29mm |
$9,00
$10,60
-16%
ADD TO BASKET
| Ø | 29mm |
| Width | 29mm |
| Fitting Position | Lower Left |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT4844, GAT5170, GAT5247 |
$9,00
$10,60
-16%
ADD TO BASKET
| Surface | Smooth |
| Material | Metal |
| Outer Diameter | 29mm |
| Inner Diameter | 8mm |
| Width | 29mm |
| Driven units | Camshaft |
$9,10
$10,60
-15%
ADD TO BASKET
| Outer Diameter 1 | 40mm |
| Width 1 | 29mm |
$10,90
$12,90
-16%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Engine Timing | Timing belt in the oil bath |
| Colour | black/white |
| Number of Teeth | 53 |
| Width | 10.2mm |
| Tooth Pitch | 8.959mm |
| Length | 475mm |
| Driven units | Oil Pump |
| More information » | |
$11,40
$13,40
-15%
ADD TO BASKET
| Width of castor bearing surface | 28mm |
| Width | 28mm |
| Inner Diameter | 8mm |
| Outer Diameter | 40mm |
| Material | Metal |
| Weight | 0.21kg |
$11,80
$13,90
-16%
ADD TO BASKET
| Ø | 40mm |
| Width | 29mm |
| Fitting Position | Upper |
| Driven units | Camshaft |
| Article number of the recommended special tool | GAT4844, GAT5170, GAT5247 |
$13,10
$15,40
-15%
ADD TO BASKET
| Surface | Smooth |
| Material | Metal |
| Outer Diameter | 40mm |
| Inner Diameter | 8mm |
| Width | 29mm |
| Driven units | Camshaft |
$13,30
$15,60
-15%
ADD TO BASKET
| Width | 28.5mm |
| Weight | 0.21kg |
| Quantity required | 1 |
| Material | Metal |
| Inner Diameter | 8mm |
| Outer Diameter | 40mm |
$14,60
$17,20
-16%
ADD TO BASKET
| Weight | 0.27kg |
| Outer Diameter | 56mm |
| Packaging length | 7.6cm |
| Packaging width | 6.6cm |
| Packaging height | 6.6cm |
$15,70
$18,40
-15%
ADD TO BASKET
| Width | 10mm |
| Number of Teeth | 53 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
| Weight | 0.023kg |
| Units/pulleys | Oil Pump |
$24,10
$28,40
-16%
ADD TO BASKET
| Height | 51mm |
| Outer Diameter | 79mm |
$26,40
$31,00
-15%
ADD TO BASKET
| Tensile Cord Material | Fiberglass |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Colour | black |
| Number of Teeth | 145 |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Length | 1, 381mm |
| Driven units | Camshaft |
| More information » | |
$28,50
$33,60
-16%
ADD TO BASKET
$28,80
$33,80
-15%
ADD TO BASKET
| Width | 10mm |
| Number of Teeth | 53 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
| Units/pulleys | Oil Pump |
$30,10
$35,40
-15%
ADD TO BASKET
| Number of Teeth | 145 |
| Length | 1, 381mm |
| Width | 25mm |
| Tooth Pitch | 9.525mm |
| Supplementary Article/Info 2 | not for dusty operating conditions |
| Driven units | Water Pump |
$30,10
$35,50
-16%
ADD TO BASKET
| Width | 25mm |
| Number of Teeth | 145 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
| Weight | 0.17kg |
| Observe service information | |
$30,20
$35,50
-15%
ADD TO BASKET
| Voltage | 12V |
| Length | 120mm |
| Width | 100mm |
| Height | 70mm |
| Weight | 0.26kg |
| Material | Plastic |
| Supplementary Article/Supplementary Info | without holder |
| Operating Mode | Electric |
| More information » | |
$35,60
$41,90
-16%
ADD TO BASKET
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Supplementary Article/Supplementary Info | without solenoid valve, with gasket/seal |
| Supplementary Article/Info 2 | non-switchable water pump |
| Number of blades/vanes | 7 |
| Pulleys | without belt pulley |
| Weight | 0.725kg |
| Observe service information | |
| More information » | |
$35,60
$41,90
-16%
ADD TO BASKET
$37,60
$44,30
-16%
ADD TO BASKET
$38,10
$44,90
-16%
ADD TO BASKET
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Supplementary Article/Supplementary Info | without solenoid valve, with gasket/seal |
| Supplementary Article/Info 2 | non-switchable water pump |
| Number of blades/vanes | 7 |
| Pulleys | without belt pulley |
| Weight | 0.725kg |
| Observe service information | |
| More information » | |
$39,40
$46,40
-16%
ADD TO BASKET
| Operating Mode | Electric |
| Voltage | 12V |
| Number of pins | 3-pin connector |
| Assy./disassy. by qualified personnel required! | |
$46,20
$54,40
-16%
ADD TO BASKET
| Operating Mode | Electric |
| Rated Voltage | 12V |
| Number of pins | 3-pin connector |
| Vehicle Equipment | for vehicles with auxiliary water pump |
| Connector Shape | oval |
| Housing Colour | black |
| Hose Diameter | 22mm |
| Housing Type | Synthetic Material Housing |
| Housing material | GRP (Glass fibre Reinforced Plastic) |
| for manufacturer | PIERBURG |
| Observe system fill quantity | |
| Consult accessories list for recommended additional repairs | |
| More information » | |
$46,40
$54,60
-16%
ADD TO BASKET
| Supplementary Article/Info 2 | without integrated disabling contact, without sensor |
| for OE No. | 04L 121 011 |
| Engine Code | DESA |
$55,40
$65,10
-15%
ADD TO BASKET
| Operating Mode | Electric |
| Quality | OE EQUIVALENT |
| for OE No. | 8K0819147A |
$57,50
$67,60
-15%
ADD TO BASKET
| Operating Mode | Mechanical |
| Supplementary Article/Supplementary Info | with gasket/seal, without integrated regulator |
| Supplementary Article/Info 2 | non-switchable water pump, with bolts/screws, without integrated disabling contact |
| Water pump impeller material | Metal |
$62,80
$73,80
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
