Timing belt and water pump kit AUDI A4 B5 (8D2) 1.6 (74kW / 100hp) 1994 - 2001
Previous 1 2 3 4 5 6 Next
| for OE No. | 050 109 479 A |
$36,00
$42,30
-15%
ADD TO BASKET
| Operating Mode | Mechanical |
| Supplementary Article/Supplementary Info | do not use sealant |
| Supplementary Article/Info 2 | with lid, with seal ring |
| Number of blades/vanes | 7 |
| Impeller Ø | 63.5mm |
| Water Pump Type | for V-ribbed belt use |
| Water pump impeller material | Plastic |
| Construction Year to | 07.2000 |
| Construction Year from | 01.1995 |
| Housing Type | with housing |
| Engine Code | ADP |
| More information » | |
$36,30
$42,70
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with gasket/seal |
| Water Pump Type | for timing belt drive |
| Number of Teeth | 23 |
| reinforced version | |
| Quality | Sealed with SiC/SiC |
| Water pump impeller material | Metal |
| New part without deposit | |
| Article number of the recommended special tool | 999 990 0002 |
| Housing material | Stainless Steel |
| Chemical Properties | High temperature-resistant |
| Engine Code | AHL, ANA, ARM |
| More information » | |
$36,40
$42,80
-15%
ADD TO BASKET
| Packaging length | 26.5cm |
| Packaging width | 16.5cm |
| Packaging height | 9.5cm |
| Weight | 0.79kg |
| Number of Teeth | 138 |
| Width | 23mm |
| Driven units | Camshaft |
| Engine Code | AHL, ANA, ARM |
| More information » | |
$36,50
$42,90
-15%
ADD TO BASKET
| Housing Type | with housing |
| Weight | 1.61kg |
| Exchange Part | |
| Engine Code | ADP |
| Pulleys | without belt pulley |
| Supplementary Article/Info 2 | without lid |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Weight | 1.02kg |
| Construction Year to | 09.1996 |
| Engine Code | ADP |
$37,40
$44,00
-16%
ADD TO BASKET
| Width | 18mm |
| Number of Teeth | 121 |
| Belts | with trapezoidal tooth profile |
| Weight | 0.3kg |
| Observe service information | |
| Engine Code | ADP |
$37,90
$44,50
-15%
ADD TO BASKET
| Outer Diameter | 74.5mm |
| Width | 24.1mm |
| SVHC | No SVHC present! |
| Engine Code | ADP |
$38,90
$45,80
-16%
ADD TO BASKET
| Belt Width | 18mm |
| Belt Material | PTFE (polytetrafluoroethylene) |
| Colour | black |
| Number of Teeth | 121 |
| Belts | with trapezoidal tooth profile |
| Construction Year to | 12.1997 |
| Engine Code | ADP |
| More information » | |
$41,30
$48,50
-15%
ADD TO BASKET
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Number of blades/vanes | 7 |
| Weight | 1.481kg |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Observe service information | |
| Engine Code | ADP |
| More information » | |
$42,30
$49,70
-15%
ADD TO BASKET
| Weight | 0.6kg |
| Driven units | Camshaft |
| Vehicle configuration line / variant | KTB |
| for OE No. | 026198119 |
| Number of Teeth | 121 |
| Width | 18mm |
| Length | 1, 153mm |
| Number of belts | 1 |
| Rollers contained | 1 |
| More information » | |
$46,30
$54,50
-16%
ADD TO BASKET
| Construction Year from | 12.1997 |
| Construction Year to | 07.2000 |
| Engine Code | ADP, AHL, ANA, ARM |
$46,70
$55,00
-16%
ADD TO BASKET
| Water Pump Type | for V-ribbed belt use |
| Number of bolts/screws | 8 |
| Water pump impeller material | Plastic |
| Housing Type | with housing |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Engine Code | ADP |
$46,90
$55,10
-15%
ADD TO BASKET
| Number of Teeth 1 | 121 |
| Width 1 | 18mm |
| Observe service information | |
| SVHC | No SVHC present! |
| Engine Code | ADP |
$48,30
$56,90
-16%
ADD TO BASKET
| Number of Teeth 1 | 138 |
| Width 1 | 23mm |
| Driven units | Camshaft |
| Vehicle configuration line / variant | KTB |
| for OE No. | 6A198119 |
| Number of Teeth | 138 |
| Width | 23mm |
| Length | 1, 104mm |
| Number of belts | 1 |
| Rollers contained | 1 |
| More information » | |
$50,10
$58,90
-15%
ADD TO BASKET
| Number of Teeth | 138 |
| Width | 23mm |
| Number of belts | 1 |
| for Art.No. | A198 |
$50,10
$59,00
-16%
ADD TO BASKET
| Operating Mode | Mechanical |
| Housing Type | two-piece housing, with housing |
| Supplementary Article/Supplementary Info | with seal rings |
| Water pump impeller material | Metal |
| Engine Code | ADP |
| Water pump impeller material | Plastic |
| Number of Teeth | 138 |
| Belts | with rounded tooth profile |
| Weight | 0.95kg |
| Observe service information | |
| Engine Code | AHL, ARM, ANA |
$50,90
$59,90
-16%
ADD TO BASKET
| Length | 1, 104mm |
| Number of Teeth | 138 |
| Width | 23mm |
| Tooth Pitch | 8mm |
| Rollers contained | 1 |
| Engine Code | AHL, ANA, ARM |
| Construction Year from | 10.1996 |
| Construction Year to | 06.2000 |
| More information » | |
$55,30
$65,10
-16%
ADD TO BASKET
| Supplementary Article/Info 2 | with lid |
| Weight | 2.05kg |
| Construction Year to | 12.1997 |
$55,80
$65,70
-16%
ADD TO BASKET
| Packaging length | 26.5cm |
| Packaging width | 16.5cm |
| Packaging height | 7cm |
| Weight | 0.66kg |
| Number of Teeth | 121 |
| Width | 18mm |
| Driven units | Camshaft |
| Engine Code | ADP |
| More information » | |
$55,80
$65,70
-16%
ADD TO BASKET
| Water Pump Type | for V-ribbed belt use |
| Operating Mode | Mechanical |
| Housing Type | with housing |
| SVHC | No SVHC present! |
| Engine Code | ADP |
$55,90
$65,70
-15%
ADD TO BASKET
| Pulleys | without belt pulley |
| Supplementary Article/Info 2 | with lid |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Weight | 1.877kg |
| Construction Year to | 09.1996 |
| Engine Code | ADP |
$56,60
$66,60
-16%
ADD TO BASKET
| Length | 1, 104mm |
| Engine Code | ADP, AHL, ANA, ARM |
$57,00
$67,10
-16%
ADD TO BASKET
| Article number of the recommended special tool | STT-1, GAT4740, GAT4741 |
| Driven units | Camshaft |
| Engine Code | ADP |
$58,60
$68,90
-15%
ADD TO BASKET
| Water pump impeller material | Plastic |
| Belt Width | 23mm |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Supplementary Article/Info 2 | with studs |
| Number of Teeth | 138 |
| Belts | with rounded tooth profile |
| Engine Code | ARM, AHL, ANA |
| More information » | |
$58,80
$69,20
-16%
ADD TO BASKET
| Number of belts | 1 |
| Weight | 1.54kg |
$58,80
$69,20
-16%
ADD TO BASKET
| Number of Teeth 1 | 138 |
| Width 1 | 23mm |
| Observe service information | |
| SVHC | No SVHC present! |
| Engine Code | AHL, ANA, ARM |
$60,40
$71,00
-15%
ADD TO BASKET
| Number of track rollers | 1 |
| Number of belts | 1 |
| Width 1 | 23mm |
| Number of Teeth | 138 |
$61,80
$72,80
-16%
ADD TO BASKET
| Weight | 1.6kg |
| Driven units | Camshaft |
| Vehicle configuration line / variant | KTBWP |
| Number of Teeth | 138 |
| Width | 23mm |
| Length | 1, 104mm |
| Number of belts | 1 |
| Rollers contained | 1 |
| More information » | |
$62,00
$73,00
-16%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
