Exhaust Emission Control BMW 3 Convertible (E30) 325 i (125kW / 170hp) 1982 - 1993
Length | 7.87Inch |
Cable Length | 200mm |
Number of pins | 4-pin connector |
Supplementary Article/Info 2 | without plug |
Lambda Sensor | Lambda Sensor |
Specification | Isolated Ground, Planar Type, Zirconia Type |
Engine Code | M20B25 |
Exhaust System | for pre-catalytic converter |
More information » |
21,40€
25,20€
-16%
ADD TO BASKET
Length | 7.87Inch |
Cable Length | 200mm |
Number of pins | 4-pin connector |
Supplementary Article/Info 2 | without plug |
Lambda Sensor | Lambda Sensor |
Specification | Isolated Ground, Planar Type, Zirconia Type |
Engine Code | M20B25 |
Alternatively | |
Exhaust System | for pre-catalytic converter |
More information » |
22,50€
26,50€
-16%
ADD TO BASKET
Lambda Sensor | Heated, Regulating Probe |
Number of circuits | 4 |
Length | 540mm |
Construction Year from | 10.1987 |
Fitting Position | before catalytic converter |
24,40€
28,70€
-15%
ADD TO BASKET
Lambda Sensor | Heated, Regulating Probe |
Number of circuits | 4 |
Connector/Clamp | Connector may need adjustment |
Construction Year to | 01.1993 |
Number of pins | 4-pin connector |
25,80€
30,30€
-15%
ADD TO BASKET
Lambda Sensor | Regulating Probe, Thread pre-greased |
Total Length | 360mm |
Number of circuits | 4 |
Fitting Position | before catalytic converter |
Fabrication Number | ESL-BM-007 |
28,00€
32,90€
-15%
ADD TO BASKET
Lambda Sensor | Lambda Sensor, Regulating Probe |
Voltage | 12V |
Length | 730mm |
Number of circuits | 4 |
Weight | 0.12kg |
Operating Mode | Electric |
Warranty | 3 years warranty |
Construction Year from | 10.1987 |
Engine Code | M20 B25 |
More information » |
30,60€
36,00€
-15%
ADD TO BASKET
for OE No. | UNIVERSAL fit |
Quality | OE |
for manufacturer | DENSO |
Thread Size | M18x1.5 |
Cable Length | 750mm |
Number of pins | 4-pin connector |
Weight | 103g |
Lambda Sensor | Heated, Finger probe, Lambda Sensor, Regulating Probe |
Catalytic Converter Type | for vehicles with catalytic converter |
Exhaust System | for pre-catalytic converter |
More information » |
32,00€
37,70€
-16%
ADD TO BASKET
Lambda Sensor | Regulating Probe |
Cable Length | 570mm |
Number of circuits | 4 |
Construction Year from | 10.1987 |
Construction Year to | 01.1993 |
Exhaust System | before catalytic converter |
Number of connectors | 4 |
More information » |
32,30€
38,00€
-15%
ADD TO BASKET
Line insulation design | with silicone-coated woven-fibre insulation |
Conductor Number | 4conductor |
Length | 550mm |
Connector Shape | round |
Thread Size | M18 x 1,5 |
Cable Length | 405mm |
for OE No. | 11 78 1 730 005 |
Weight | 0.148kg |
Lambda Sensor | Thread pre-greased |
Fitting Position | before catalytic converter |
Production date from | 01.09.1987 |
More information » |
36,10€
42,50€
-16%
ADD TO BASKET
Lambda Sensor | Lambda Sensor |
Cable Length | 570mm |
Number of circuits | 4 |
39,70€
46,70€
-15%
ADD TO BASKET
Line insulation design | with silicone-coated woven-fibre insulation |
Lambda Sensor | Planar probe, Heated, Thread pre-greased |
Supplementary Article/Supplementary Info | with squeeze connector, with shrink squeeze connector |
Cable Length | 210mm |
Number of circuits | 4 |
Weight | 0.09kg |
Fitting Position | before catalytic converter |
More information » |
40,00€
47,00€
-15%
ADD TO BASKET
Lambda Sensor | Heated, Regulating Probe |
Number of circuits | 4 |
Supplementary Article/Info 2 | without plug |
Engine Code | M20 B25 |
Construction Year from | 10.1987 |
Fitting Position | before catalytic converter |
42,30€
49,70€
-15%
ADD TO BASKET
Lambda Sensor | Heated, Regulating Probe |
Number of circuits | 4 |
Length | 1,420mm |
Engine Code | M20 B25 (256E2), M20 B25 (256EX), M20 B25 (256K1) |
Left-/right-hand drive vehicles | for left-hand drive vehicles |
Catalytic Converter Type | for vehicles with catalytic converter |
Construction Year from | 09.1987 |
More information » |
57,10€
67,20€
-16%
ADD TO BASKET
Number of circuits | 4 |
Recommended change interval | 160,000km |
Connector/Clamp | Connector may need adjustment |
Construction Year to | 01.1993 |
Lambda Sensor | Regulating Probe |
Fitting Position | before catalytic converter |
Number of pins | 4-pin connector |
More information » |
58,60€
ADD TO BASKET
for OE No. | 11781721125, 11781720860 |
Quality | OE |
for manufacturer | DENSO |
Thread Size | M18x1.5 |
Cable Length | 790mm |
Number of pins | 4-pin connector |
Weight | 131g |
Lambda Sensor | Heated, Finger probe, Lambda Sensor, Regulating Probe |
Catalytic Converter Type | for vehicles with catalytic converter |
Exhaust System | for pre-catalytic converter |
More information » |
68,60€
80,70€
-15%
ADD TO BASKET
Line insulation design | with silicone-coated woven-fibre insulation |
Conductor Number | 4conductor |
Connector Shape | round |
Thread Size | M18 x 1,5 |
Total Length | 570mm |
Number of pins | 4-pin connector |
Recommended change interval | 100,000km |
Weight | 0.13kg |
Lambda Sensor | Thread pre-greased |
Construction Year from | 10.1987 |
Engine Code | M20B25 |
More information » |
69,30€
81,50€
-15%
ADD TO BASKET
Number of circuits | 4 |
Total Length | 570mm |
Available as universal article as well, see article no. | 0258986503 |
Recommended change interval | 100,000km |
Construction Year from | 10.1987 |
Construction Year to | 01.1993 |
Lambda Sensor | Regulating Probe |
Fitting Position | before catalytic converter |
Number of pins | 4-pin connector |
More information » |
73,10€
79,40€
-8%
ADD TO BASKET
Cable Length | 630mm |
Lambda Sensor | Finger probe, Heated, Regulating Probe |
Construction Year from | 10.1987 |
Construction Year to | 12.1992 |
Number of pins | 4-pin connector |
101,40€
119,30€
-16%
ADD TO BASKET
Length | 630mm |
Number of circuits | 4 |
Construction Year to | 12.1992 |
Lambda Sensor | Regulating Probe |
Fitting Position | before catalytic converter |
166,10€
195,40€
-15%
ADD TO BASKET