Sensors BMW 7 (E38) 728 i, iL (142kW / 193hp) 1994 - 2001
Previous 1 2 3 ... 11 12 13 14 15 Next
| Fitting Position | Front Axle both sides |
| Connector Shape | round |
| Length | 610mm |
| Quantity required | 2 |
| Construction Year from | 09.1998 |
33,20€
39,00€
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Fitting Position | Exhaust Side |
| Connector Shape | D Shape |
| Quantity required | 1 |
| Supplementary Article/Info 2 | with screw, with seal ring, for camshaft, without cable |
| Sensor Type | Active sensor, Hall Sensor |
| Number of connectors | 3 |
| Rated Voltage | 12V |
| Fitting Depth | 28mm |
| Number of mounting bores | 1 |
| Weight | 0.03kg |
| More information » | |
33,30€
39,20€
-16%
ADD TO BASKET
| Cable Length | 605mm |
| Fitting Position | Right, Left, Front Axle |
33,30€
39,20€
-16%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor, Regulating Probe |
| Voltage | 12V |
| Length | 430mm |
| Number of circuits | 4 |
| Weight | 0.1kg |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| Construction Year from | 10.1998 |
| Engine Code | M52 B28 |
| More information » | |
33,50€
39,40€
-15%
ADD TO BASKET
| Fabrication Number | EPO-BM-004 |
33,60€
39,50€
-15%
ADD TO BASKET
| Lambda Sensor | Regulating Probe |
| Cable Length | 1,100mm |
| Number of circuits | 4 |
| Construction Year from | 09.1995 |
| Construction Year to | 09.1998 |
| Exhaust System | before catalytic converter |
33,80€
39,70€
-15%
ADD TO BASKET
| Engine Code | M52 B28 (286S1) |
| Construction Year from | 10.1998 |
34,10€
40,10€
-15%
ADD TO BASKET
| Number of connectors | 3 |
| Weight | 0.03kg |
| Supplementary Article/Info 2 | with seal ring |
| Construction Year to | 09.1998 |
34,40€
40,50€
-16%
ADD TO BASKET
| Voltage | 5V |
| Number of pins | 3-pin connector |
| Assy./disassy. by qualified personnel required! | |
| Fitting Position | primary |
| Engine Code | M52B286S1 |
34,60€
40,60€
-15%
ADD TO BASKET
| Lambda Sensor | Regulating Probe |
| Voltage | 12V |
| Length | 350mm |
| Number of circuits | 4 |
| Weight | 0.14kg |
| Resistor | 2.1Ohm |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| Construction Year from | 10.1998 |
| More information » | |
34,70€
40,80€
-15%
ADD TO BASKET
| Cable Length | 1,030mm |
| Fitting Position | Right, Left, Rear Axle |
35,20€
41,40€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | M52 B28, M52 B28 TU |
| Construction Year from | 10.1998 |
| Lambda Sensor | Regulating Probe |
35,20€
41,40€
-15%
ADD TO BASKET
| Length | 66mm |
| Material | Plastic |
| Supplementary Article/Supplementary Info | with holder, with shrink squeeze connector |
| Number of pins | 2-pin connector |
| Supplementary Article/Info 2 | with cable, with a plug |
35,90€
42,20€
-15%
ADD TO BASKET
| Housing Type | with housing |
| Number of pins | 3-pin connector |
| Housing material | Plastic |
36,60€
43,00€
-15%
ADD TO BASKET
| Housing Colour | black |
| Number of pins | 4-pin connector |
36,80€
43,30€
-16%
ADD TO BASKET
| for Art.No. | 13 63 1 721 456 |
| Width 1 | 43mm |
| Height 1 | 22mm |
| Length 1 | 46mm |
| Weight | 24g |
| Warranty | 3 years warranty |
| Number of pins | 3-pin connector |
| More information » | |
36,90€
43,40€
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Construction Year from | 09.1998 |
37,20€
43,80€
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Engine Code | M52 B28 (286S1), M52 B28 (286S2) |
| Construction Year from | 09.1998, 09.1998 |
| Block Separation | |
37,20€
43,80€
-16%
ADD TO BASKET
| Number of connectors | 3 |
| Rated Voltage | 5V |
| Weight | 0.024kg |
37,30€
43,90€
-16%
ADD TO BASKET
37,80€
44,50€
-16%
ADD TO BASKET
| Number of pins | 4-pin connector |
| Vehicle type | 728i/iL |
| Construction Year to | 09.1998 |
37,90€
44,60€
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Supplementary Article/Supplementary Info | with squeeze connector, with shrink squeeze connector |
| Lambda Sensor | Finger probe, Heated, Thread pre-greased, Regulating Probe |
| Number of pins | 4-pin connector |
| for OE No. | V99760001 |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Length | 350mm |
| Exhaust System | after catalytic converter |
| Engine Code | M52 B28, M52 B28 TU |
| Construction Year from | 10.1998 |
| More information » | |
38,00€
44,70€
-15%
ADD TO BASKET
| Length | 225mm |
| Cable Length | 315mm |
| Engine Code | M52 B28 (286S1) |
| Construction Year from | 10.1998 |
38,10€
44,80€
-15%
ADD TO BASKET
| Housing Type | with housing |
| Number of pins | 3-pin connector |
| Housing material | Plastic |
| Connector Shape | rectangular |
| Recommended additional repairs | Air Filter |
| for OE No. | 28164 37100, 1362 1 432 356 |
| Construction Year from | 09.1998 |
| More information » | |
38,50€
45,30€
-16%
ADD TO BASKET
| Fabrication Number | ESS-BM-003 |
38,70€
45,50€
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Lambda Sensor | Planar probe, Heated, Thread pre-greased |
| Supplementary Article/Supplementary Info | with squeeze connector, with shrink squeeze connector |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Construction Year from | 09.1998 |
| Fitting Position | before catalytic converter |
| More information » | |
40,00€
47,00€
-15%
ADD TO BASKET
| Length | 350mm |
| Number of pins | 4-pin connector |
| Techn. Info. No. | Universal 77004 |
| Construction Year from | 10.1998 |
| Lambda Sensor | Regulating Probe |
40,10€
47,10€
-15%
ADD TO BASKET
| Voltage | 12V |
| Housing Type | with housing |
| Number of pins | 3-pin connector |
| Weight | 0.2kg |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| Construction Year from | 09.1998 |
| More information » | |
40,50€
47,60€
-15%
ADD TO BASKET
| Housing Type | with housing |
| Number of pins | 4-pin connector |
| Connector Shape | round |
| Housing material | Plastic |
| Recommended additional repairs | Air Filter |
| Construction Year to | 09.1998 |
40,70€
47,90€
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Thread Size | M18 x 1,5 |
| Connector Shape | round |
| Conductor Number | 4conductor |
| Length | 300mm |
| Number of circuits | 4 |
| Weight | 0.123kg |
| Lambda Sensor | Thread pre-greased |
| Engine Code | M52 B28 (286S1), M52 B28 (286S1) |
| Construction Year from | 09.1998, 09.1998 |
| Block Separation | |
| Left-/right-hand drive vehicles | for left-hand drive vehicles |
| More information » | |
40,70€
47,90€
-16%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
