Sensors BMW 1 (F20) M 135 i (235kW / 320hp) 2011 - 2019
Previous 1 2 3 ... 6 7 8 9 Next
| Total Length | 615mm |
| Sensor Type | Active sensor |
| Number of pins | 2-pin connector |
| Assy./disassy. by qualified personnel required! | |
| Fitting Position | Front Axle |
| Vehicle Equipment | for vehicles without parking assistant system |
| Quantity required | 2 |
| More information » | |
46,10€
54,30€
-16%
ADD TO BASKET
| Operating Mode | Electronic |
| Fitting Position | Interior |
46,60€
54,80€
-15%
ADD TO BASKET
| Length | 802mm |
| MAPP code available | |
| Construction Year from | 09.2012 |
| Quantity required | 2 |
| Fitting Position | Rear Axle |
48,00€
56,40€
-15%
ADD TO BASKET
| Fitting Position | Front, Rear |
| Colour | black |
| Sensor Type | Ultrasonic Sensor |
| Supplementary Article/Supplementary Info | with seal |
| Number of connectors | 3 |
| Chemical Properties | Paintable |
| See accessories list for additionally required parts | |
| Weight | 0.014kg |
| Shape | angled |
| Quantity required | 4 |
| More information » | |
49,30€
58,00€
-15%
ADD TO BASKET
| Voltage | 12V |
| Corresponds to the original part in colour | black |
| Sensor Type | Hall Sensor |
| Number of pins | 3-pin connector |
| Number of mounting bores | 1 |
| Assy./disassy. by qualified personnel required! | |
| Quantity required | 2 |
| More information » | |
49,80€
ADD TO BASKET
| Lambda Sensor | Heated, Thread pre-greased, Diagnostic Probe |
| Number of circuits | 4 |
| Cable Length | 525mm |
| Thread Size | M18x1,5 |
| SVHC | No SVHC present! |
| Emission Standard | From Euro 6 |
| Construction Year from | 07.2013 |
| More information » | |
54,60€
64,20€
-15%
ADD TO BASKET
| Voltage | 12V |
| Number of pins | 5-pin connector |
| Fabrication Number | EPP-BM-027 |
54,60€
64,30€
-16%
ADD TO BASKET
| Cable Length | 720mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 10.8235 |
| Number of circuits | 4 |
| Engine Code | N55 B30 A |
| Construction Year to | 07.2013 |
| Fitting Position | after catalytic converter |
| More information » | |
55,40€
65,10€
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Connector Shape | D Shape |
| Supplementary Article/Info 2 | with seal ring |
| Seal Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of mounting bores | 3 |
| Housing Type | Synthetic Material Housing |
| Housing material | GRP (Glass fibre Reinforced Plastic) |
| Vehicle Equipment | for vehicles with oil level sensor |
| Observe system fill quantity | |
| More information » | |
55,80€
65,60€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160,000km |
| Connector/Clamp | Connector may need adjustment |
| Construction Year to | 06.2013 |
| Lambda Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
56,50€
60,50€
-7%
ADD TO BASKET
| Supplementary Article/Info 2 | without cable |
| from | 40,000Pa |
| to | 200,000Pa |
| Voltage | 5V |
| Assy./disassy. by qualified personnel required! | |
58,50€
68,90€
-16%
ADD TO BASKET
| Programmed | |
| Tightening Torque | 4Nm |
| Assy./disassy. by qualified personnel required! | |
62,50€
ADD TO BASKET
| Number of circuits | 4 |
| Construction Year from | 07.2013 |
| Lambda Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
63,60€
74,80€
-15%
ADD TO BASKET
| Number of circuits | 5 |
| Total Length | 492mm |
| Recommended change interval | 250,000km |
| Construction Year from | 07.2013 |
| Lambda Sensor | Regulating Probe |
| Fitting Position | before catalytic converter |
63,70€
75,00€
-16%
ADD TO BASKET
| Number of connectors | 3 |
| Colour | black |
| Material | Plastic |
| Weight | 0.004kg |
| Supplementary Article/Supplementary Info | with seal |
64,80€
76,30€
-16%
ADD TO BASKET
| to | 9bar |
| Tightening torque to | 4Nm |
| Supplementary Article/Info 2 | with pressure sensor, with integrated air temperature sensor, with valves, with seal ring, with box nut, with screw |
| Supplementary Article/Supplementary Info | with battery |
| Information Transfer | Radio |
| Weight | 46g |
| Supported by | De-Minimis |
| Material | Aluminium |
| Valve colour | silver |
| Number of valves | 1 |
| Lithium weight | 0.1g |
| Article number of the recommended special tool | 95990021 |
| only with | 95990021 |
| Number of bolts/screws | 1 |
| Frequency Range | 433MHz, 434MHz |
| SVHC | No SVHC present! |
| Observe technical data | |
| More information » | |
67,90€
79,90€
-16%
ADD TO BASKET
| Number of mounting bores | 1 |
| Number of pins | 6-pin connector |
| Transmission Type | Manual Transmission |
| Left-/right-hand drive vehicles | for left-hand drive vehicles |
| Assy./disassy. by qualified personnel required! | |
69,50€
81,80€
-16%
ADD TO BASKET
| Cable Length | 735mm |
| Lambda Sensor | Planar probe, Heated, Diagnostic Probe |
| Fitting Position | after catalytic converter, after catalytic converter |
| Block Separation | |
| Construction Year to | 07.2013 |
70,30€
82,70€
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Version | AM |
73,00€
85,80€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Total Length | 690mm |
| Recommended change interval | 160,000km |
| Construction Year to | 06.2013 |
| Lambda Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
75,10€
88,30€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor, Regulating Probe |
| Weight | 0.15kg |
| Warranty | 3 years warranty |
| Construction Year from | 07.2013 |
| Construction Year to | 06.2013 |
| Fitting Position | before catalytic converter |
77,30€
90,90€
-15%
ADD TO BASKET
| Rated Voltage | 12V |
| Number of pins | 5-pin connector |
| Recommended additional repairs | Air Filter |
| SVHC | No SVHC present! |
86,10€
101,30€
-16%
ADD TO BASKET
| Number of pins | 9-pin connector |
| Weight | 0.08kg |
| Warranty | 3 years warranty |
86,50€
101,70€
-15%
ADD TO BASKET
| Mounting Type | Bayonet |
| Number of pins | 3-pin connector |
| for OE No. | 9 240 180 |
| for manufacturer number | 6PX 012 684-021 |
| Assy./disassy. by qualified personnel required! | |
| SVHC | 7439-92-1; Lead |
| Vehicle Equipment | for vehicles with automatic climate control |
| More information » | |
90,80€
ADD TO BASKET
| Number of circuits | 5 |
| Total Length | 685mm |
| Recommended change interval | 250,000km |
| Construction Year to | 06.2013 |
| Lambda Sensor | Regulating Probe |
| Fitting Position | before catalytic converter |
92,20€
108,50€
-16%
ADD TO BASKET
| Housing Type | Synthetic Material Housing |
| Number of pins | 3-pin connector |
| Ø | 34mm |
| Glass | with rain/light sensor, with humidity sensor |
| Length | 68.9mm |
| Width | 49.4mm |
| Height | 20.7mm |
| Connector Shape | angular |
| Always compare old and new part (in particular OE No.) | |
| not for SA code | S610A |
| Construction Year from | 07.2013 |
| Vehicle Equipment | for vehicles with automatic climate control |
| More information » | |
97,80€
115,00€
-15%
ADD TO BASKET
| Supplementary Article/Info 2 | with cable |
| Total Length | 650mm |
| Temperature range from | -40°C |
| Temperature range to | 150°C |
| Fitting Position | Front Axle |
| Vehicle Equipment | for vehicles with parking assistant system |
99,40€
116,90€
-15%
ADD TO BASKET
| Recommended additional repairs | Air Filter |
100,70€
118,40€
-15%
ADD TO BASKET
| Number of mounting bores | 3 |
| Number of pins | 6-pin connector |
| Transmission Type | for automatic transmission |
| Left-/right-hand drive vehicles | for left-hand drive vehicles |
| Assy./disassy. by qualified personnel required! | |
106,30€
125,10€
-16%
ADD TO BASKET
| Connector Shape | oval |
| Transmission Type | Automatic Transmission |
| Vehicle Equipment | for vehicles with automatic transmission |
| Left-/right-hand drive vehicles | for right-hand drive vehicles, for left-hand drive vehicles |
| Number of pins | 6-pin connector |
| for OE No. | 35 42 6 853 175 |
| Supplementary Article/Info 2 | with sensor |
| Weight | 0.239kg |
| More information » | |
108,20€
127,30€
-16%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
