Sensors CITROËN BX (XB-_) 19 E (80kW / 109hp) 1982 - 1994
Previous 1 2 3 Next
| Lambda Sensor | Regulating Probe, Thread pre-greased |
| Connector/Clamp | Connector may need adjustment |
| Number of circuits | 4 |
| Fitting Position | before catalytic converter |
| Fabrication Number | ESL-UV-000 |
28,00€
32,90€
-15%
ADD TO BASKET
| Ø | 12mm |
| Weight | 0.03kg |
| Construction Year from | 05.1990 |
| Engine Code | XU9M |
28,10€
33,00€
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Pressure from | 15kPa |
| Pressure to | 100kPa |
28,80€
33,90€
-16%
ADD TO BASKET
| Pressure from | 15kPa |
| Pressure to | 102kPa |
| Output Voltage, from | 0.261V |
| Output Voltage, up to | 4.958V |
| Engine Code | DDZ (XU9M) |
| Country Specific Design | Austria, Germany, Switzerland |
31,70€
37,20€
-15%
ADD TO BASKET
| Quality | OE |
| for manufacturer | DENSO |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| Weight | 100g |
| Lambda Sensor | Heated, Finger probe, Lambda Sensor, Regulating Probe |
| Gross Weight | 149g |
| Exhaust System | for pre-catalytic converter |
| More information » | |
33,10€
38,90€
-15%
ADD TO BASKET
| Lambda Sensor | Regulating Probe |
| Voltage | 12V |
| Length | 1,300mm |
| Number of circuits | 4 |
| Weight | 0.2kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| More information » | |
35,20€
41,40€
-15%
ADD TO BASKET
| Measuring Range from | 15kPa |
| Measuring Range to | 102kPa |
| Supplementary Article/Info 2 | without integrated air temperature sensor |
35,20€
41,40€
-15%
ADD TO BASKET
| Colour | black |
| Number of pins | 3-pin connector |
| Weight | 0.064kg |
37,70€
44,30€
-15%
ADD TO BASKET
| Operating Mode | Pneumatic |
38,60€
45,40€
-15%
ADD TO BASKET
| Cable Length | 317mm |
| Lambda Sensor | Finger probe, Heated, Regulating Probe |
38,80€
45,60€
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Lambda Sensor | Planar probe, Heated, Thread pre-greased |
| Supplementary Article/Supplementary Info | with squeeze connector, with shrink squeeze connector |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Construction Year from | 04.1990 |
| Fitting Position | before catalytic converter |
| More information » | |
40,00€
47,00€
-15%
ADD TO BASKET
| Pressure from | 15kPa |
| Pressure to | 102kPa |
| Output Voltage, from | 0.261V |
| Output Voltage, up to | 4.958V |
| Engine Code | DDZ (XU9M) |
| Country Specific Design | Austria, Germany, Switzerland |
40,20€
47,30€
-16%
ADD TO BASKET
| Lambda Sensor | Heated, Regulating Probe |
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | DDZ (XU9M) |
42,30€
49,70€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160,000km |
| Connector/Clamp | Connector may need adjustment |
| Lambda Sensor | Regulating Probe |
| Fitting Position | before catalytic converter |
58,60€
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
