Sensors DACIA LOGAN MCV (KS_) 1.4 (55kW / 75hp) 2007 - ...
Previous 1 2 3 ... 6 7 8 9 Next
| Pressure from | 20kPa |
| Pressure to | 100kPa |
| Output Voltage, from | 0.52V |
| Output Voltage, up to | 4.78V |
| Engine Code | K7J 710 |
| Quantity required | 1 |
28,70€
33,70€
-15%
ADD TO BASKET
28,70€
33,70€
-15%
ADD TO BASKET
| Vehicle Equipment | for vehicles with tyre-pressure monitoring system |
| Frequency Range | 433MHz |
| Recommended change interval | 5Years |
28,80€
33,90€
-16%
ADD TO BASKET
| Thread Size | M12x1,25 |
| Spanner Size | 24 |
| Engine Code | K7J 710 |
| Quantity required | 1 |
28,90€
34,00€
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Colour | black |
29,70€
35,00€
-16%
ADD TO BASKET
| Braking/Drive Dynamics | for vehicles with ABS |
| Rated Voltage | 12V |
| Weight | 0.09kg |
| Fitting Position | Rear Axle Right |
| Construction Year from | 12.2007 |
29,80€
35,00€
-15%
ADD TO BASKET
| Cable Length | 300mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 1.997.008 |
| Number of circuits | 4 |
| Engine Code | K7J 710 |
| Fitting Position | after catalytic converter |
| Quantity required | 1 |
| Length | 250mm |
| More information » | |
30,40€
35,70€
-15%
ADD TO BASKET
| Conductor Number | 4conductor |
| Length | 460mm |
| Resistor | 9Ohm |
| Number of circuits | 4 |
| Cable Length | 460mm |
| Lambda Sensor | Heated |
30,40€
35,80€
-16%
ADD TO BASKET
| Engine Code | K7J 710 |
30,50€
35,90€
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Supplementary Article/Info 2 | without cable |
30,70€
36,10€
-15%
ADD TO BASKET
| Supplementary Article/Info 2 | without cable |
| Number of pins | 2-pin connector |
| Housing Colour | black |
30,90€
36,30€
-15%
ADD TO BASKET
| Lambda Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-SK-000 |
31,00€
36,40€
-15%
ADD TO BASKET
| Length | 470mm |
| Number of connectors | 4 |
| Exhaust System | before catalytic converter |
| Lambda Sensor | Diagnostic Probe |
31,40€
36,90€
-15%
ADD TO BASKET
| Cable Length | 350mm |
| Number of pins | 4-pin connector |
| Lambda Sensor | Heated, Thread pre-greased |
| Fabrication Number | ESL-RE-003 |
31,50€
37,10€
-16%
ADD TO BASKET
| Lambda Sensor | Heated |
| Voltage | 12V |
| Length | 450mm |
| Number of circuits | 4 |
| Weight | 0.12kg |
| Resistor | 3.5Ohm |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| More information » | |
31,60€
37,10€
-15%
ADD TO BASKET
| Weight | 0.06kg |
| Construction Year to | 11.2010 |
31,70€
37,20€
-15%
ADD TO BASKET
| Engine Code | K7J 710 |
31,70€
37,30€
-16%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor |
| Cable Length | 470mm |
| Alternatively | |
| Connector Shape | oval |
| Number of circuits | 4 |
| Alternative Repair Kit | 570083 |
32,30€
38,00€
-15%
ADD TO BASKET
| Quality | OE |
| for manufacturer | DENSO |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| Weight | 95g |
| Lambda Sensor | Heated, Finger probe, Lambda Sensor, Regulating Probe |
| Gross Weight | 139g |
| Exhaust System | for pre-catalytic converter |
| More information » | |
32,70€
38,50€
-16%
ADD TO BASKET
| Construction Year to | 12.2015 |
32,80€
38,60€
-16%
ADD TO BASKET
| Lambda Sensor | Heated, Regulating Probe |
| Length | 450mm |
| Number of pins | 4-pin connector |
| Techn. Info. No. | Universal 77004 |
| Fitting Position | before catalytic converter |
34,70€
40,80€
-15%
ADD TO BASKET
| Measuring Range from | 20kPa |
| Measuring Range to | 100kPa |
| Supplementary Article/Info 2 | without integrated air temperature sensor |
35,20€
41,40€
-15%
ADD TO BASKET
| Weight | 0.06kg |
| Construction Year to | 11.2010 |
35,70€
42,00€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
35,80€
42,10€
-15%
ADD TO BASKET
| Fuel Type | Petrol |
| Number of pins | 3-pin connector |
| Weight | 0.02kg |
| Construction Year to | 12.2012 |
37,40€
44,00€
-15%
ADD TO BASKET
| Cable Length | 450mm |
| Conductor Number | 4conductor |
| Supplementary Article/Info 2 | with fastening material |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Regulating Probe |
| Available as universal article as well, see article no. | 1.997.007 |
| Number of circuits | 4 |
| Engine Code | K7J 710 |
| More information » | |
38,60€
45,40€
-15%
ADD TO BASKET
| Cable Length | 317mm |
| Lambda Sensor | Finger probe, Heated, Diagnostic Probe |
| Fitting Position | after catalytic converter |
38,80€
45,60€
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Lambda Sensor | Planar probe, Heated, Thread pre-greased |
| Supplementary Article/Supplementary Info | with squeeze connector, with shrink squeeze connector |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Construction Year to | 09.2008 |
| Fitting Position | after catalytic converter |
| More information » | |
40,00€
47,00€
-15%
ADD TO BASKET
| Weight | 0.028kg |
| Engine Code | K7J 710 |
41,30€
48,60€
-16%
ADD TO BASKET
| Cable Length | 300mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 10.7008 |
| Number of circuits | 4 |
| Engine Code | K7J 710 |
| Fitting Position | after catalytic converter |
| Quantity required | 1 |
| Length | 250mm |
| More information » | |
42,00€
49,40€
-15%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
