Sensors DACIA DUSTER (HS_) 1.6 16V 4x4 (77kW / 105hp) 2010 - 2018
Previous 1 2 3 ... 7 8 9 10 Next
| Cable Length | 350mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Heated, Thread pre-greased |
| Fabrication Number | ESL-RE-003 |
$34,00
$40,00
-15%
ADD TO BASKET
| to | 9bar |
| Tightening torque to | 4Nm |
| Supplementary Article/Info 2 | with pressure sensor, with integrated air temperature sensor, with valves, with seal ring, with box nut, with screw |
| Supplementary Article/Supplementary Info | with battery |
| Information Transfer | Radio |
| Weight | 46g |
| Supported by | De-Minimis |
| Material | Aluminium |
| Valve colour | silver |
| Number of valves | 1 |
| Lithium weight | 0.1g |
| Article number of the recommended special tool | 95990021 |
| only with | 95990021 |
| Number of bolts/screws | 1 |
| Frequency Range | 433MHz, 434MHz |
| SVHC | No SVHC present! |
| Observe technical data | |
| More information » | |
$34,50
$40,60
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Thread pre-greased, Regulating Sensor |
| Number of circuits | 4 |
| Cable Length | 295mm |
| Thread Size | M18x1, 5 |
| SVHC | No SVHC present! |
$35,90
$42,30
-16%
ADD TO BASKET
| Sensor Type | Ultrasonic Sensor |
| Number of pins | 3-pin connector |
| Colour | black |
| Chemical Properties | Paintable |
| Fitting Position | Rear, Centre |
| Code Letter | DU83 |
$36,10
$42,50
-16%
ADD TO BASKET
| Cable Length | 470mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor |
| Fitting Position | before catalytic converter |
| Engine Code | K4M490 |
$37,00
$43,50
-15%
ADD TO BASKET
| Measuring Range from | 20kPa |
| Measuring Range to | 100kPa |
| Supplementary Article/Info 2 | without integrated air temperature sensor |
$37,20
$43,70
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor, Diagnostic Probe |
| External Thread Size | M18 x 1, 5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 460mm |
| Weight | 0.083kg |
| for OE No. | 82004-61432 |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
| More information » | |
$37,90
$44,60
-16%
ADD TO BASKET
| Oxygen Sensor | Diagnostic Probe |
| Voltage | 12V |
| Length | 500mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.13kg |
| Resistor | 9Ohm |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$38,70
$45,50
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | K4M 606 |
| Oxygen Sensor | Regulating Sensor |
| Number of connectors | 3 |
| Sensor Type | Hall Sensor |
| Fitting Depth | 27.8mm |
| Connector Shape | oval |
$39,00
$45,80
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Length | 411mm |
| Engine Code | K4M 606 |
| for model code | HSA5, HSA9 |
| Fitting Position | before catalytic converter |
$39,80
$46,90
-16%
ADD TO BASKET
| Sensor Type | Ultrasonic Sensor |
| Number of pins | 3-pin connector |
| Colour | black |
| Chemical Properties | Paintable |
| Fitting Position | Rear, outer |
| Code Letter | DQ83 |
$40,20
$47,30
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor, Heated, Regulating Sensor |
| Conductor Number | 4conductor |
| Cable Length | 350mm |
| Thread Size | M18 x 1, 5 |
| Engine Code | K4M 606 |
| Fitting Position | before catalytic converter |
| for OE No. | 82 00 771 294 |
| More information » | |
$40,30
$47,30
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 93g |
| Gross Weight | 140g |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$41,20
$48,50
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Diagnostic Probe |
| Number of pins | 4-pin connector |
| Cable Length | 350mm |
| Quality | OE EQUIVALENT |
| for OE No. | 2269000Q1D |
| Fitting Position | after catalytic converter |
$41,20
$48,50
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 440mm |
| Number of circuits | 4 |
$41,30
$48,60
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
$42,40
$49,90
-16%
ADD TO BASKET
| Cable Length | 450mm |
| Conductor Number | 4conductor |
| Supplementary Article/Info 2 | with fastening material |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 1.997.007 |
| Number of circuits | 4 |
| Engine Code | K4M 606, K4M606/K4M646 |
| Fitting Position | after catalytic converter |
| Quantity required | 1 |
| for type code | HSA5/HSA8/HSA9/HSMR |
| Length | 434mm |
| More information » | |
$43,10
$50,70
-15%
ADD TO BASKET
| Cable Length | 450mm |
| Conductor Number | 4conductor |
| Supplementary Article/Info 2 | with fastening material |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 10.7007 |
| Number of circuits | 4 |
| Engine Code | K4M 606, K4M606/K4M646 |
| Fitting Position | after catalytic converter |
| Quantity required | 1 |
| for type code | HSA5/HSA8/HSA9/HSMR |
| Length | 434mm |
| More information » | |
$44,20
$52,00
-15%
ADD TO BASKET
| Cable Length | 450mm |
| Conductor Number | 4conductor |
| Supplementary Article/Info 2 | with fastening material |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Regulating Sensor |
| Available as universal article as well, see article no. | 1.998.235 |
| Number of circuits | 4 |
| Engine Code | K4M 646 |
| Fitting Position | before catalytic converter |
| for type code | HSA5/HSA9 |
| More information » | |
$44,30
$52,10
-15%
ADD TO BASKET
| Cable Length | 350mm |
| Conductor Number | 4conductor |
| Supplementary Article/Info 2 | with fastening material |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Regulating Sensor |
| Available as universal article as well, see article no. | 1.998.235 |
| Number of circuits | 4 |
| Engine Code | K4M 606 |
| Fitting Position | before catalytic converter |
| for type code | HSA8/HSMR |
| More information » | |
$44,90
$52,80
-15%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Heated, Thread pre-greased, Regulating Sensor |
| Line insulation design | with silicone-coated woven-fibre insulation |
| Supplementary Article/Info 2 | without plug |
| Number of pins | 4-pin connector |
| for OE No. | V99760001 |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Length | 350mm |
| Fitting Position | after catalytic converter |
| Engine Code | K4M 606 |
| More information » | |
$45,00
$52,90
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Diagnostic Probe |
| Number of circuits | 4 |
| Length | 735mm |
| Engine Code | K4M 606 |
$45,00
$52,90
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Oxygen Sensor | Planar Sensor, Heated, Thread pre-greased |
| Supplementary Article/Info 2 | without plug |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Fitting Position | before catalytic converter, after catalytic converter |
$47,00
$55,30
-16%
ADD TO BASKET
| Cable Length | 450mm |
| Conductor Number | 4conductor |
| Supplementary Article/Info 2 | with fastening material |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Regulating Sensor |
| Available as universal article as well, see article no. | 10.8235 |
| Number of circuits | 4 |
| Engine Code | K4M 646 |
| Fitting Position | before catalytic converter |
| for type code | HSA5/HSA9 |
| More information » | |
$47,60
$55,90
-15%
ADD TO BASKET
| can be programmed | |
| Colour | black |
| Frequency Range | 433MHz |
| Material | Rubber |
| Engine Code | K4M 606 |
| Cable Length | 335mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor |
| Fitting Position | before catalytic converter |
| for model code | HSA8/HSMR |
| Engine Code | K4M 606 |
$48,70
$57,30
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Length | 500mm |
| Engine Code | K4M 606 |
| Fitting Position | before catalytic converter |
$49,60
$58,30
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Overall Length | 370mm |
| Available as universal article as well, see article no. | 0258986602 |
| Recommended change interval | 250, 000km |
| Engine Code | K4M 606 |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
| More information » | |
$49,90
$58,70
-15%
ADD TO BASKET
| can be programmed | |
| Colour | silver |
| Frequency Range | 433MHz |
| Material | Steel |
| Engine Code | K4M 606 |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
