Spark Plug MAZDA 626 IV Hatchback (GE) 2.5 24V (GE5P) (120kW / 163hp) 1991 - 1998
| for OE No. | 0F28718110 |
| Electrode Gap | 1mm |
| Spanner Size | 16 mm |
| Spark Plug | Nickel Middle Electrode, 1 - Earthed Electrode |
| Thread Length | 19mm |
$2,00
$2,30
-14%
ADD TO BASKET
| Tightening torque from | 20Nm |
| Tightening torque to | 30Nm |
| Tightening Torque | 28Nm |
| Assy./disassy. by qualified personnel required! | |
| Electrode Gap | 1.1mm |
| Thread Size | M14 x 1, 25 |
| Spanner Size | 16 |
| Spark Plug | 1 - Earthed Electrode |
| Thread Length | 19mm |
| Construction Year from | 09.1994 |
| Engine Code | KL DOHC V6 |
| More information » | |
$2,10
$2,40
-13%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, Nickel Middle Electrode |
| Electrode Gap | 1.1mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Ø | 14mm |
| for OE No. | 18829-11050 |
| Connector type | Solid SAE |
| Spanner Size | 16 mm |
| Tightening Torque | 22Nm |
| Weight | 43g |
| Gross Weight | 46g |
| alternative item | K16TT |
| Engine Code | KL |
| Quantity required | 6 |
| More information » | |
$2,30
$2,70
-15%
ADD TO BASKET
| Electrode Gap | 0.8mm |
| Tightening Torque | 28Nm |
| Thread Size | M 14 x 1, 25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Spark Position | 3mm |
| Number of pins | 1-pin connector |
| Construction Year to | 03.1997 |
| Fuel Type | CNG/LPG |
| Supplementary Article/Info 2 | Electrode gap must be set for operation on gas |
| Replace after | 15, 000km |
| Quantity required | 6 |
| More information » | |
$2,40
$2,80
-15%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, Nickel Middle Electrode |
| Electrode Gap | 1mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Ø | 14mm |
| for OE No. | 1WT2 18 110 |
| Connector type | Solid SAE |
| Spanner Size | 16 mm |
| Tightening Torque | 22Nm |
| Weight | 43g |
| Gross Weight | 46g |
| alternative item | IK16TT, IK16 |
| Engine Code | KL |
| Quantity required | 6 |
| More information » | |
| Electrode Gap | 1.1mm |
| Tightening Torque | 28Nm |
| Thread Size | M 14 x 1, 25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Spark Position | 5mm |
| Number of pins | 1-pin connector |
| Construction Year to | 03.1997 |
| Quantity required | 6 |
| More information » | |
$2,80
$3,30
-16%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, with resistor |
| Electrode Gap | 0.9mm |
| Thread Size | M14 x 1.25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Engine Code | KL |
$2,90
$3,40
-15%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, with gasket seat |
| Electrode Gap | 0.9mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Techn. Info. No. | CET2 |
| Connector type | SAE |
| Packing Type | Carton |
| Spanner Size | 16 mm |
| Quality Grade | Ti Poly-V |
| Spark Position | 3mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Packaging length | 8.85cm |
| Packaging width | 2.6cm |
| Packaging height | 2.35cm |
| Resistor from | 3kOhm |
| Resistor to | 10kOhm |
| Projection | 1.5mm |
| Quantity required | 6 |
| Alternatively | |
| More information » | |
$3,20
$3,80
-16%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, with gasket seat |
| Electrode Gap | 0.9mm |
| Thread Size | M14x1, 25 |
| Thread Length | 19mm |
| Connector type | SAE |
| Spanner Size | 16 mm |
| Quality Grade | Poly-V Tit |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Resistor from | 3kOhm |
| Resistor to | 10kOhm |
| Quantity required | 6 |
| Alternatively | |
| More information » | |
$3,50
$4,10
-15%
ADD TO BASKET
| Electrode Gap | 1.1mm |
| Tightening Torque | 28Nm |
| Thread Size | M 14 x 1, 25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Spark Position | 5mm |
| Number of pins | 4-pin connector |
| Construction Year to | 03.1997 |
| Quantity required | 6 |
| More information » | |
$4,50
$5,30
-16%
ADD TO BASKET
| Spanner Size | 16 mm |
| Thread Size | M14 x 1, 25 |
| Thread Length | 19mm |
| Spark Plug | Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector |
| Spark Position | 5mm |
| Construction Year from | 09.1994 |
| Engine Code | KL DOHC V6 |
| More information » | |
| Spanner Size | 16 mm |
| Thread Size | M14 x 1, 25 |
| Thread Length | 19mm |
| Spark Plug | Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector |
| Spark Position | 5mm |
| Construction Year from | 09.1994 |
| Engine Code | KL DOHC V6 |
| More information » | |
| Spark Plug | 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode |
| Electrode Gap | 1mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Techn. Info. No. | RC9MCC4 |
| Connector type | SAE |
| Packing Type | Carton |
| Spanner Size | 16 mm |
| Quality Grade | Cu-core GE |
| Spark Position | 5mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Packaging length | 8.65cm |
| Packaging width | 2.45cm |
| Packaging height | 2.45cm |
| Resistor from | 6kOhm |
| Resistor to | 15kOhm |
| Projection | 3mm |
| Quantity required | 6 |
| More information » | |
$4,80
$5,60
-15%
ADD TO BASKET
| Spark Plug | 2 - Earthed Electrode, with gasket seat, Copper Centre Electrode |
| Electrode Gap | 0.8mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Techn. Info. No. | RC7BMC |
| Connector type | M4/SAE |
| Packing Type | Carton |
| Spanner Size | 16 mm |
| Quality Grade | Nickel GE |
| Spark Position | 5.9mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Packaging length | 8.85cm |
| Packaging width | 2.6cm |
| Packaging height | 2.35cm |
| Resistor from | 3kOhm |
| Resistor to | 9kOhm |
| Projection | 3mm |
| Quantity required | 6 |
| Alternatively | |
| Fuel Type | Liquefied Petroleum Gas (LPG) |
| Recommended change interval | 20, 000km |
| More information » | |
$4,80
$5,70
-16%
ADD TO BASKET
| Fuel Type | Petrol/Liquified Petroleum Gas (LPG), CNG |
| Spark Plug | Silver Center Electrode |
| Tightening Torque | 25Nm |
| Spanner Size | 16 mm |
| Electrode Gap | 0.9mm |
| Thread Size | M14x1, 25 |
| Thread Length 1 | 19mm |
| Number of pins | 1-pin connector |
| Engine Code | KL |
| More information » | |
| Spark Plug | 2 - Earthed Electrode, with gasket seat |
| Electrode Gap | 0.8mm |
| Self-service suited packaging see parts list | |
| Thread Size | M14x1, 25 |
| Thread Length | 19mm |
| Techn. Info. No. | 14 FR-6 LDU |
| Connector type | M4/SAE |
| Spanner Size | 16 mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Quantity required | 6 |
| Alternatively | |
| Fuel Type | Liquefied Petroleum Gas (LPG) |
| Recommended change interval | 20, 000km |
| More information » | |
$6,90
$8,10
-15%
ADD TO BASKET
| contains article no. | 13604 |
| External Thread Size | M14 x 1, 25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Electrode Gap | 1.1mm |
| Spark Plug | with gasket seat, 1 - Earthed Electrode, Platinum Middle Electrode |
$7,60
$8,90
-15%
ADD TO BASKET
| Spark Plug | 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode |
| Electrode Gap | 0.8mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Techn. Info. No. | RC10WMPB3 |
| Connector type | SAE |
| Packing Type | Carton |
| Spanner Size | 16 mm |
| Quality Grade | Pt GE |
| Spark Position | 5mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Packaging length | 9.5cm |
| Packaging width | 2.4cm |
| Packaging height | 2.4cm |
| Resistor from | 3kOhm |
| Resistor to | 10kOhm |
| Projection | 3mm |
| Quantity required | 6 |
| Alternatively | |
| More information » | |
$8,30
$9,80
-16%
ADD TO BASKET
| Electrode Gap | 0.7mm |
| Tightening Torque | 28Nm |
| Thread Size | M 14 x 1, 25 |
| Thread Length | 19mm |
| Spanner Size | 16 |
| Spark Position | 4mm |
| Number of pins | 1-pin connector |
| Construction Year to | 03.1997 |
| Fuel Type | CNG/LPG |
| Replace after | 30, 000km |
| Quantity required | 6 |
| More information » | |
$8,60
$10,10
-15%
ADD TO BASKET
| Spark Plug | with resistor, 1 - Earthed Electrode, Iridium Middle Electrode |
| Electrode Gap | 1mm |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Ø | 14mm |
| Connector type | Solid SAE |
| Spanner Size | 16 mm |
| Tightening Torque | 22Nm |
| Weight | 43g |
| Gross Weight | 46g |
| alternative item | IK16TT |
| Engine Code | KL |
| Quantity required | 6 |
| Fuel Type | CNG/LPG |
| More information » | |
$9,20
$10,80
-15%
ADD TO BASKET
| Spanner Size | 16 mm |
| Thread Size | M14 x 1, 25 |
| Thread Length | 19mm |
| Spark Plug | Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector |
| Spark Position | 5mm |
| Construction Year from | 09.1994 |
| Engine Code | KL DOHC V6 |
| More information » | |
| Fuel Type | Petrol |
| Replace after | 60, 000km |
| Spark Plug | Nickel-Copper Center Electrode |
| Tightening Torque | 25Nm |
| Spanner Size | 16 mm |
| Thread Size | M14x1, 25 |
| Thread Length 1 | 19mm |
| Number of pins | 6-pin connector |
| Engine Code | KL |
| More information » | |
$15,30
$17,90
-15%
ADD TO BASKET
| Spanner Size | 16 mm |
| Thread Size | M14 x 1, 25 |
| Thread Length | 19mm |
| Spark Plug | Iridium Middle Electrode, Fixed SAE connector |
| Fuel Type | CNG/LPG |
| Recommended change interval | 60, 000km |
| Construction Year from | 09.1994 |
| Engine Code | KL DOHC V6 |
| More information » | |
| Spark Plug | 1 - Earthed Electrode, with gasket seat |
| Electrode Gap | 0.9mm |
| Self-service suited packaging see parts list | |
| Thread Size | M14x1.25 |
| Thread Length | 19mm |
| Techn. Info. No. | CET2 |
| Connector type | SAE |
| Packing Type | Blister Pack |
| Spanner Size | 16 mm |
| Quality Grade | Ti Poly-V |
| Spark Position | 3mm |
| Tightening torque from | 25Nm |
| Tightening torque to | 30Nm |
| Packaging length | 20cm |
| Packaging width | 10cm |
| Packaging height | 3.2cm |
| Resistor from | 3kOhm |
| Resistor to | 10kOhm |
| Projection | 1.5mm |
| Quantity required | 6 |
| Alternatively | |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
