Sensor / Probe different MITSUBISHI COLT VI (Z3_A, Z2_A) 1.1 (Z31A, Z32A) (55kW / 75hp) 2002 - 2012
Previous 1 2 3 Next
| Number of pins | 3-pin connector |
| Sensor Type | Inductive Sensor |
| Supplementary Article/Info 2 | without cable |
| Housing Colour | black |
| Quantity required | 1 |
$29,00
$34,10
-15%
ADD TO BASKET
| Cable Length | 450mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor |
| Fitting Position | before catalytic converter |
$30,00
$35,30
-16%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Regulating Sensor, Diagnostic Probe |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Transmission Type | Manual Transmission |
| Block Separation | |
| Fitting Position | before catalytic converter, after catalytic converter |
$30,10
$35,40
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Sensor Type | Hall Sensor |
$32,90
$38,70
-15%
ADD TO BASKET
| Measuring Range from | 10kPa |
| Measuring Range to | 115kPa |
| Supplementary Article/Info 2 | with integrated air temperature sensor |
$32,90
$38,70
-15%
ADD TO BASKET
| Outer Diameter | 55mm |
| Number of connectors | 3 |
| Weight | 0.002kg |
| Supplementary Article/Info 2 | with seal ring |
$33,20
$39,10
-16%
ADD TO BASKET
| from | 10, 000Pa |
| to | 118, 000Pa |
| Voltage | 5V |
| Resistor | 2, 080Ohm |
| Number of pins | 4-pin connector |
| Sensor Type | NTC Sensor |
| Assy./disassy. by qualified personnel required! | |
| SVHC | 7439-92-1; Lead |
| Construction Year to | 06.2010 |
| More information » | |
$35,00
$41,10
-15%
ADD TO BASKET
| Length | 54.5mm |
| Number of connectors | 3 |
| Weight | 0.002kg |
| Supplementary Article/Info 2 | with seal ring |
$35,60
$41,90
-16%
ADD TO BASKET
| Cable Length | 370mm |
| Oxygen Sensor | Planar Sensor, Heated, Diagnostic Probe |
| Fitting Position | after catalytic converter |
$35,70
$42,00
-15%
ADD TO BASKET
| Length | 54.5mm |
| Number of connectors | 3 |
| Weight | 0.002kg |
| Supplementary Article/Info 2 | with seal ring |
$38,30
$45,10
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | 3A91 |
| not for country specific design | Russia |
| Construction Year to | 06.2010 |
| Oxygen Sensor | Regulating Sensor |
| Cable Length | 400mm |
| Conductor Number | 4conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Regulating Sensor |
| Available as universal article as well, see article no. | 1.998.235 |
| Number of circuits | 4 |
| Engine Code | 3A91 |
| Construction Year from | 07.2010 |
| not for country specific design | Russia |
| Fitting Position | before catalytic converter |
| More information » | |
$40,00
$47,10
-16%
ADD TO BASKET
| Cable Length | 350mm |
| Conductor Number | 4conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 1.998.235 |
| Number of circuits | 4 |
| Engine Code | 3A91 |
| Fitting Position | after catalytic converter |
| More information » | |
$41,80
$49,20
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
$42,40
$49,90
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 93g |
| Gross Weight | 140g |
| Construction Year to | 09.2008 |
| Transmission Type | Manual Transmission |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$42,60
$50,10
-15%
ADD TO BASKET
| Fitting Position | before catalytic converter, after catalytic converter |
| Oxygen Sensor | Planar Sensor, Thread pre-greased, Heated, Diagnostic Probe |
| Number of pins | 4-pin connector |
| Cable Length | 350mm |
| Thread Size | M18x1, 5 |
| Switch Pressure | 4bar |
| Connector Shape | rectangular |
| Weight | 0.14kg |
| More information » | |
$43,90
$51,60
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Overall Length | 408mm |
| Available as universal article as well, see article no. | 0258986602 |
| Recommended change interval | 250, 000km |
| Construction Year from | 07.2010 |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
| More information » | |
$44,90
$52,80
-15%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Heated, Thread pre-greased, Regulating Sensor |
| Line insulation design | with silicone-coated woven-fibre insulation |
| Supplementary Article/Info 2 | without plug |
| Number of pins | 4-pin connector |
| for OE No. | V99760001 |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Length | 350mm |
| Fitting Position | after catalytic converter |
| Engine Code | 3A91 |
| not for country specific design | Russia |
| Construction Year to | 06.2010 |
| More information » | |
$45,00
$52,90
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Oxygen Sensor | Planar Sensor, Heated, Thread pre-greased |
| Supplementary Article/Info 2 | without plug |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Fitting Position | before catalytic converter, after catalytic converter |
$47,00
$55,30
-16%
ADD TO BASKET
| Cable Length | 350mm |
| Conductor Number | 4conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 10.8235 |
| Number of circuits | 4 |
| Engine Code | 3A91 |
| Fitting Position | after catalytic converter |
| More information » | |
$47,30
$55,60
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Regulating Sensor |
| Supplementary Article/Info 2 | with rubber grommet |
| Thread Size | M18x1.5 |
| Cable Length | 475mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | MN128424 |
| Quality | OE |
| Weight | 121g |
| Gross Weight | 154g |
| Construction Year to | 09.2008 |
| Transmission Type | Manual Transmission |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$47,80
$56,20
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Overall Length | 348mm |
| Available as universal article as well, see article no. | 0258986602 |
| Recommended change interval | 250, 000km |
| Oxygen Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
$50,80
$59,70
-15%
ADD TO BASKET
| Overall Length | 478mm |
| Construction Year to | 06.2010 |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
$50,90
$59,90
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Length | 750mm |
| Engine Code | 3A91 |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
$55,30
$65,00
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
$60,90
$65,30
-7%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
