Sensors MITSUBISHI COLT VI (Z3_A, Z2_A) 1.5 CZT (Z37A) (110kW / 150hp) 2002 - 2012
Previous 1 2 3 4 Next
| Sensor Type | Hall Sensor |
| Supplementary Article/Info 2 | with cable |
| Overall Length | 808mm |
| Temperature range from | -40°C |
| Temperature range to | 150°C |
| Fitting Position | Rear Axle |
$27,90
$32,90
-16%
ADD TO BASKET
| Engine Code | 4G15T |
$28,00
$32,90
-15%
ADD TO BASKET
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe, Thread pre-greased |
| Thread Size | M18x1.5 |
| Cable Length | 475mm |
| Number of pins | 4-pin connector |
| Fitting Position | before catalytic converter, after catalytic converter |
| Fabrication Number | ESL-MS-008 |
$28,20
$33,10
-15%
ADD TO BASKET
| Length | 50.7mm |
| Outer Diameter | 16mm |
| Number of connectors | 3 |
| Weight | 0.028kg |
| Supplementary Article/Info 2 | with seal ring |
$28,60
$33,70
-16%
ADD TO BASKET
| Fitting Position | Front, after catalytic converter |
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-FT-003 |
$28,80
$33,90
-16%
ADD TO BASKET
| Sensor Type | Ultrasonic Sensor |
| Chemical Properties | Paintable |
| Fitting Position | Front, Rear |
$29,90
$35,20
-16%
ADD TO BASKET
| Cable Length | 450mm |
| Oxygen Sensor | Planar Sensor, Heated, Diagnostic Probe |
| Fitting Position | after catalytic converter |
$30,00
$35,30
-16%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Regulating Sensor, Diagnostic Probe |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Transmission Type | Manual Transmission |
| Block Separation | |
| Fitting Position | before catalytic converter, after catalytic converter |
$30,10
$35,40
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Fitting Depth | 27mm |
| Engine Code | 4G15T |
$30,10
$35,40
-15%
ADD TO BASKET
| Housing Type | without housing |
| Fabrication Number | EPP-MS-003 |
$31,00
$36,50
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Fitting Depth | 27mm |
$32,70
$38,40
-15%
ADD TO BASKET
$33,30
$39,10
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Engine Code | 4G15T |
| Oxygen Sensor | Diagnostic Probe |
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
$42,40
$49,90
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Diagnostic Probe |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 93g |
| Gross Weight | 140g |
| Construction Year to | 09.2008 |
| Transmission Type | Manual Transmission |
| More information » | |
$42,60
$50,10
-15%
ADD TO BASKET
| Length | 51mm |
| Outer Diameter | 16mm |
| Number of connectors | 3 |
| Weight | 0.028kg |
| Supplementary Article/Info 2 | with seal ring |
$42,90
$50,50
-16%
ADD TO BASKET
| Oxygen Sensor | Finger-type Sensor, Heated, Thread pre-greased, Diagnostic Probe |
| Line insulation design | with silicone-coated woven-fibre insulation |
| Supplementary Article/Info 2 | without plug |
| Number of pins | 4-pin connector |
| for OE No. | V99760001 |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Length | 350mm |
| Fitting Position | after catalytic converter |
| Engine Code | 4G15T |
| More information » | |
$45,00
$52,90
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Oxygen Sensor | Planar Sensor, Heated, Thread pre-greased |
| Supplementary Article/Info 2 | without plug |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Construction Year from | 12.2005 |
| Fitting Position | after catalytic converter |
| More information » | |
$47,00
$55,30
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Diagnostic Probe |
| Supplementary Article/Info 2 | with rubber grommet |
| Thread Size | M18x1.5 |
| Cable Length | 475mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | MN128424 |
| Quality | OE |
| Weight | 121g |
| Gross Weight | 154g |
| Construction Year to | 09.2008 |
| Transmission Type | Manual Transmission |
| More information » | |
$47,80
$56,20
-15%
ADD TO BASKET
$48,00
$56,50
-16%
ADD TO BASKET
| Overall Length | 478mm |
| Oxygen Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
$50,90
$59,90
-16%
ADD TO BASKET
| Voltage | 12V |
| Number of pins | 4-pin connector |
| Housing Type | without housing |
| Quantity required | 1 |
$52,90
$62,30
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Length | 750mm |
| Engine Code | 4G15DOHC |
| Oxygen Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
$55,30
$65,00
-15%
ADD TO BASKET
| Housing Type | without housing |
| Number of pins | 4-pin connector |
| Plug Type | Male |
| Housing Colour | black |
| Voltage | 12V |
| Recommended additional repairs | Air Filter |
$55,60
$65,40
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
$56,00
$65,90
-16%
ADD TO BASKET
| Number of pins | 4-pin connector |
| New Part | |
| Used part return not required | |
$57,30
$67,40
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
$60,90
$65,30
-7%
ADD TO BASKET
| Mounting Type | Bolted |
| Number of pins | 4-pin connector |
| Supplementary Article/Supplementary Info | with gasket/seal |
| Assy./disassy. by qualified personnel required! | |
$64,60
$76,00
-16%
ADD TO BASKET
| Operating Mode | Electric |
| Voltage | 12V |
| Engine Code | 4G15T |
$85,80
$100,90
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
