Sensor / Probe NISSAN JUKE (F15) 1.6 DIG-T NISMO RS 4x4 (157kW / 214hp) 2010 - 2019
Previous 1 2 Next
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-SK-000 |
$18,80
$22,10
-15%
ADD TO BASKET
| Fitting Position | before soot particulate filter |
| Number of pins | 3-pin connector |
| Number of connectors | 2 |
| Supplementary Article/Info 2 | without connection line |
| Guarantee | 3 years guarantee |
| Exhaust System | for vehicles with factory fitted soot -/particulate filter |
| Weight | 0.04kg |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$20,80
$24,50
-16%
ADD TO BASKET
| Cable Length | 370mm |
| Oxygen Sensor | Planar Sensor, Heated, Diagnostic Probe |
| Fitting Position | after catalytic converter |
$22,70
$26,70
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| from | 0Pa |
| to | 100, 000Pa |
| Exhaust System | before soot particulate filter |
$22,90
$27,00
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
$24,20
$28,50
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Rated Voltage | 12V |
| Article number of recommended accessories | 54271045 |
| SVHC | No SVHC present! |
$26,10
$30,70
-15%
ADD TO BASKET
| for OE No. | 22771 1AT0A, 39210 2A800 |
| Number of pins | 3-pin connector |
| Connector Shape | oval |
| Guarantee | 3 years guarantee |
| Number of mounting bores | 1 |
| Weight | 0.05kg |
| Number of circuits | 2 |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$26,10
$30,70
-15%
ADD TO BASKET
| Length | 400mm |
| Resistor | 3.7Ohm |
| Number of circuits | 4 |
| Conductor Number | 4conductor |
| Cable Length | 400mm |
| Oxygen Sensor | Heated, Diagnostic Probe |
| Engine Code | MR16DDT |
| More information » | |
$26,40
$31,10
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Connector Shape | oval |
| Number of connectors | 2 |
| for OE No. | 392102A800 |
$27,40
$32,30
-16%
ADD TO BASKET
| Fitting Position | Front, after catalytic converter |
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-NS-016 |
$27,60
$32,40
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Opening Pressure | 14kPa |
$30,20
$35,50
-15%
ADD TO BASKET
| Number of connectors | 4 |
| Length | 375mm |
| Fitting Position | Front |
| Oxygen Sensor | Diagnostic Probe |
$31,70
$37,30
-16%
ADD TO BASKET
| Housing Colour | black |
| Exhaust System | for vehicles with factory fitted soot -/particulate filter |
| Number of pins | 3-pin connector |
$32,70
$38,40
-15%
ADD TO BASKET
| Output Voltage, from | 0.5V |
| Output Voltage, up to | 4.5V |
| Engine Code | MR16DDT |
| Fitting Position | before soot particulate filter |
$33,00
$38,90
-16%
ADD TO BASKET
| Output Voltage, from | 0.5V |
| Output Voltage, up to | 4.5V |
| Engine Code | MR16DDT |
| Fitting Position | before soot particulate filter |
$33,60
$39,50
-15%
ADD TO BASKET
$36,70
$43,10
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Connector Shape | oval |
| Number of connectors | 2 |
| Pressure from | -14kPa |
| Pressure to | 100kPa |
| Engine Code | MR16DDT |
$41,40
$48,70
-15%
ADD TO BASKET
| Cable Length | 400mm |
| Conductor Number | 4conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 10.7007 |
| Number of circuits | 4 |
| Engine Code | MR16DDT |
| Fitting Position | after catalytic converter |
| Quantity required | 1 |
| More information » | |
$41,80
$49,10
-15%
ADD TO BASKET
$41,90
$49,30
-16%
ADD TO BASKET
| Exhaust System | for vehicles with factory fitted soot -/particulate filter |
| Supplementary Article/Info 2 | with connection line, with protection hose, with marten protection, with clamps |
| Pressure pipe connector Ø | 5mm, 6.5mm |
| Length | 1m |
| Material | Silicone |
| Chemical Properties | Oil resistant |
| Temperature range from | -40°C |
| Temperature range to | +350°C |
| Clamping Range from | 10mm, 11mm, 11.5mm, 12.5mm |
| Clamping Range to | 12.5mm, 13.5mm, 14mm, 15mm |
| SVHC | No SVHC present! |
| More information » | |
$42,60
$50,10
-15%
ADD TO BASKET
| Mounting Type | Bolted |
| Number of pins | 3-pin connector |
| Assy./disassy. by qualified personnel required! | |
| Exhaust System | before soot particulate filter |
| Engine Code | MR16DDT |
$53,30
$62,70
-15%
ADD TO BASKET
| Sensor Type | Differential Pressure Sensor |
| Output Voltage, up to | 5V |
| Measuring Range to | 100kPa |
| Number of pins | 3-pin connector |
| Number of mounting bores | 1 |
| Supplementary Article/Supplementary Info | without accessories |
$54,60
$64,20
-15%
ADD TO BASKET
| Length | 300mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Regulating Sensor |
| Exhaust System | for pre-catalytic converter |
| for OE No. | 22693-1KC0A |
| Number of pins | 2-pin connector |
| Supplementary Article/Info 2 | with cable |
| Fitting Position | Pipe at EGR valve |
| Cable Length | 150mm |
| for OE No. | 14730ED000 |
| Engine Code | MR16DDT |
$68,00
$80,00
-15%
ADD TO BASKET
| Fabrication Number | EGT-NS-013 |
| Cable Length | 150mm |
$76,40
$89,90
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Broadband Oxygen Sensor, Thread pre-greased, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 300mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 226931KC0A |
| Quality | OE |
| Weight | 91g |
| Gross Weight | 119g |
| Exhaust System | for pre-catalytic converter |
| Check OE number | |
| More information » | |
$104,10
$122,50
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Diagnostic Probe |
| Number of circuits | 4 |
| Length | 471mm |
| Engine Code | MR16DDT |
$106,40
$125,10
-15%
ADD TO BASKET
| Length | 500mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Regulating Sensor |
| Exhaust System | for pre-catalytic converter |
| for OE No. | 22693BV80A |
$113,50
$133,60
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Finger-type Sensor, Broadband Oxygen Sensor, Thread pre-greased, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 514mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 22693BV80A |
| Quality | OE |
| Weight | 102g |
| Gross Weight | 130g |
| Exhaust System | for pre-catalytic converter |
| Check OE number | |
| More information » | |
$117,70
$138,40
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
