Sensors NISSAN X-TRAIL II (T31) 2.0 4x4 (104kW / 141hp) 2007 - 2018
Previous 1 2 3 4 5 Next
| Lambda Sensor | Finger probe, Regulating Probe, Diagnostic Probe |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Transmission Type | Manual Transmission |
| Block Separation | |
| Fitting Position | before catalytic converter, after catalytic converter |
27,70€
32,60€
-16%
ADD TO BASKET
| Length | 14.96Inch |
| Cable Length | 380mm |
| Number of pins | 4-pin connector |
| Lambda Sensor | Lambda Sensor |
| Specification | Isolated Ground, Planar Type, Zirconia Type |
| Available as universal article as well, see article no. | OS-08P |
| Engine Code | MR20DE |
| Construction Year to | 12.2009 |
| More information » | |
27,90€
32,80€
-15%
ADD TO BASKET
| Length | 16.54Inch |
| Cable Length | 420mm |
| Number of pins | 4-pin connector |
| Lambda Sensor | Lambda Sensor |
| Specification | Isolated Ground, Planar Type, Zirconia Type |
| Available as universal article as well, see article no. | OS-15P |
| Engine Code | MR20DE |
| Construction Year to | 12.2009 |
| Exhaust System | after catalytic converter |
| More information » | |
27,90€
32,90€
-16%
ADD TO BASKET
| Lambda Sensor | Regulating Probe, Thread pre-greased |
| Number of circuits | 4 |
| Fitting Position | before catalytic converter |
| Fabrication Number | ESL-NS-021 |
28,00€
32,90€
-15%
ADD TO BASKET
| Number of pins | 5-pin connector |
| Housing Type | without housing |
28,00€
33,00€
-16%
ADD TO BASKET
| Fitting Position | Front Axle |
| Number of pins | 2-pin connector |
| Cable Length | 685mm |
28,60€
33,70€
-16%
ADD TO BASKET
| Number of connectors | 3 |
| Weight | 0.025kg |
28,80€
33,80€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor |
| Voltage | 12V |
| Length | 400mm |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| More information » | |
29,10€
34,20€
-15%
ADD TO BASKET
| Length | 300mm |
| Thread Size | M18x1.5-6e |
| Number of pins | 4-pin connector |
| Lambda Sensor | Heated, Planar probe |
| Fitting Position | Front, before catalytic converter, after catalytic converter |
| Supplementary Article/Info 2 | without potentiometer |
29,40€
34,60€
-16%
ADD TO BASKET
| Cable Length | 700mm |
| Number of pins | 2 |
| SVHC | No SVHC present! |
| Fitting Position | Front Axle, Left, Right |
29,90€
35,20€
-16%
ADD TO BASKET
| Lambda Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-SK-000 |
31,00€
36,40€
-15%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Housing Colour | black |
| Sensor Type | Hall Sensor |
31,30€
36,80€
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | without suction pipe |
| for Art.No. | 86286E |
| Quality | OE EQUIVALENT |
31,50€
37,10€
-16%
ADD TO BASKET
| Number of pins | 3-pin connector |
| Pressure from | 20kPa |
| Pressure to | 100kPa |
31,90€
37,50€
-15%
ADD TO BASKET
| Cable Length | 300mm |
| Lambda Sensor | Finger probe, Heated, Diagnostic Probe |
| Fitting Position | after catalytic converter |
32,70€
38,50€
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Resistor | 9Ohm |
| Length | 300mm |
| Conductor Number | 4conductor |
| Cable Length | 300mm |
| Lambda Sensor | Heated |
32,80€
38,60€
-16%
ADD TO BASKET
32,90€
38,70€
-15%
ADD TO BASKET
| Length | 300mm |
| Number of connectors | 4 |
| Exhaust System | after catalytic converter |
| Lambda Sensor | Diagnostic Probe |
34,90€
41,00€
-15%
ADD TO BASKET
| Measuring Range from | 20kPa |
| Measuring Range to | 100kPa |
| Supplementary Article/Info 2 | without integrated air temperature sensor |
35,20€
41,40€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
35,80€
42,10€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor |
| Voltage | 12V |
| Length | 400mm |
| Number of circuits | 4 |
| Weight | 0.12kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| More information » | |
36,00€
42,40€
-16%
ADD TO BASKET
| Fitting Position | Rear Axle Left, Rear Axle Right |
37,40€
44,00€
-15%
ADD TO BASKET
| Cable Length | 300mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 1.997.007 |
| Number of circuits | 4 |
| Engine Code | MR20DE |
| Fitting Position | after catalytic converter |
| More information » | |
39,00€
45,80€
-15%
ADD TO BASKET
39,60€
46,60€
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Lambda Sensor | Planar probe, Heated, Thread pre-greased |
| Supplementary Article/Supplementary Info | with squeeze connector, with shrink squeeze connector |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Fitting Position | after catalytic converter |
| More information » | |
40,00€
47,00€
-15%
ADD TO BASKET
| Lambda Sensor | Heated |
| External Thread Size | M18 x 1,5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 475mm |
| Weight | 0.1kg |
40,50€
47,60€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor |
| Total Length | 350mm |
| Cable Length | 320mm |
| Number of pins | 4-pin connector |
41,60€
48,90€
-15%
ADD TO BASKET
| Rated Voltage | 12V |
| Number of pins | 5-pin connector |
| Supplementary Article/Supplementary Info | without suction pipe |
| Recommended additional repairs | Air Filter |
| SVHC | No SVHC present! |
43,80€
51,50€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Total Length | 580mm |
| Available as universal article as well, see article no. | 0258986602 |
| Recommended change interval | 160,000km |
| Lambda Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
45,10€
53,00€
-15%
ADD TO BASKET
| Housing Type | without housing |
| Number of pins | 5-pin connector |
46,00€
54,10€
-15%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
