Sensor / Probe NISSAN X-TRAIL II (T31) 2.0 4x4 (104kW / 141hp) 2007 - 2018
Previous 1 2 3 Next
| Measuring Range from | 20kPa |
| Measuring Range to | 100kPa |
| Supplementary Article/Info 2 | without integrated air temperature sensor |
35,20€
41,40€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor |
| Cable Length | 290mm |
| Alternatively | |
| Number of circuits | 4 |
| Alternative Repair Kit | 570112 |
35,80€
42,10€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor |
| Voltage | 12V |
| Length | 400mm |
| Number of circuits | 4 |
| Weight | 0.12kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Warranty | 3 years warranty |
| More information » | |
36,20€
42,60€
-16%
ADD TO BASKET
| Cable Length | 300mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Diagnostic Probe |
| Available as universal article as well, see article no. | 1.997.007 |
| Number of circuits | 4 |
| Engine Code | MR20DE |
| Fitting Position | after catalytic converter |
| More information » | |
39,00€
45,80€
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Lambda Sensor | Planar probe, Heated, Thread pre-greased |
| Supplementary Article/Supplementary Info | with squeeze connector, with shrink squeeze connector |
| Cable Length | 210mm |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Fitting Position | after catalytic converter |
| More information » | |
40,00€
47,00€
-15%
ADD TO BASKET
| Lambda Sensor | Heated |
| External Thread Size | M18 x 1,5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 475mm |
| Weight | 0.1kg |
40,70€
47,80€
-15%
ADD TO BASKET
| Lambda Sensor | Lambda Sensor |
| Total Length | 350mm |
| Cable Length | 320mm |
| Number of pins | 4-pin connector |
41,60€
48,90€
-15%
ADD TO BASKET
| Rated Voltage | 12V |
| Number of pins | 5-pin connector |
| Supplementary Article/Supplementary Info | without suction pipe |
| Recommended additional repairs | Air Filter |
| SVHC | No SVHC present! |
43,80€
51,50€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Total Length | 580mm |
| Available as universal article as well, see article no. | 0258986602 |
| Recommended change interval | 160,000km |
| Lambda Sensor | Diagnostic Probe |
| Fitting Position | after catalytic converter |
45,10€
53,00€
-15%
ADD TO BASKET
| Housing Type | without housing |
| Number of pins | 5-pin connector |
46,00€
54,10€
-15%
ADD TO BASKET
| Number of pins | 5-pin connector |
| Housing Type | without housing |
46,70€
54,90€
-15%
ADD TO BASKET
| Fitting Position | after catalytic converter, before catalytic converter |
| Cable Length | 400mm |
| Number of pins | 4-pin connector |
| Assy./disassy. by qualified personnel required! | |
| Lambda Sensor | Regulating Probe |
48,10€
56,50€
-15%
ADD TO BASKET
| Housing Type | without housing |
| Number of pins | 5-pin connector |
| Connector Shape | oval |
| Recommended additional repairs | Air Filter |
| Supplementary Article/Info 2 | Can only be fitted with original mounting |
| New Part | |
| Used part return not required | |
| More information » | |
48,80€
57,40€
-15%
ADD TO BASKET
| Housing Type | without housing |
49,00€
57,70€
-16%
ADD TO BASKET
| Number of circuits | 4 |
| Total Length | 300mm |
| Available as universal article as well, see article no. | 0258986602 |
| Recommended change interval | 160,000km |
| Lambda Sensor | Regulating Probe |
| Fitting Position | before catalytic converter |
49,10€
57,80€
-16%
ADD TO BASKET
| Voltage | 12V |
| Number of pins | 5-pin connector |
| Housing Type | without housing |
| Quantity required | 1 |
49,20€
57,90€
-16%
ADD TO BASKET
| Cable Length | 400mm |
| Conductor Number | 4conductor |
| Lambda Sensor | Heated, Planar probe, Thread pre-greased, Regulating Probe |
| Available as universal article as well, see article no. | 1.997.007 |
| Number of circuits | 4 |
| Engine Code | MR20DE |
| Fitting Position | before catalytic converter |
| More information » | |
51,20€
60,20€
-15%
ADD TO BASKET
| Lambda Sensor | Heated, Regulating Probe |
| Number of circuits | 4 |
| Length | 471mm |
| Engine Code | MR20DE |
51,80€
60,90€
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160,000km |
| Connector/Clamp | Connector may need adjustment |
| Lambda Sensor | Regulating Probe, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
56,50€
60,50€
-7%
ADD TO BASKET
56,80€
66,90€
-16%
ADD TO BASKET
| Quality | OE |
| for manufacturer | DENSO |
| Thread Size | M18x1.5 |
| Cable Length | 300mm |
| Number of pins | 4-pin connector |
| Weight | 80g |
| Lambda Sensor | Heated, Finger probe, Lambda Sensor, Diagnostic Probe |
| Gross Weight | 110g |
| for OE No. | 226A0EN21A |
| More information » | |
57,90€
68,10€
-15%
ADD TO BASKET
| Housing Type | without housing |
| Number of pins | 5-pin connector |
| Plug Type | Male |
| Housing Colour | black |
| Voltage | 12V |
| Recommended additional repairs | Air Filter |
73,20€
86,10€
-15%
ADD TO BASKET
| Mounting Type | Bolted |
| Number of pins | 5-pin connector |
| Supplementary Article/Supplementary Info | without suction pipe |
| Assy./disassy. by qualified personnel required! | |
78,90€
92,80€
-15%
ADD TO BASKET
| Recommended additional repairs | Air Filter |
90,00€
105,90€
-16%
ADD TO BASKET
| for OE No. | 22680-7S000 |
| Quality | OE |
| Operating Mode | Electric |
| Number of pins | 5-pin connector |
| Gross Weight | 66g |
98,80€
116,20€
-15%
ADD TO BASKET
| Operating Mode | Electric |
| Voltage | 12V |
| Engine Code | MR20DE |
106,50€
125,30€
-16%
ADD TO BASKET
| Housing Type | without housing |
| Supplementary Article/Info 2 | with integrated air temperature sensor |
112,50€
132,30€
-15%
ADD TO BASKET
| Colour | chrome/black |
| Engine Code | MR20DE |
130,00€
153,00€
-16%
ADD TO BASKET
| Warranty | 5 years warranty |
148,00€
174,10€
-15%
ADD TO BASKET
160,70€
189,00€
-15%
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
