Sensor / Probe OPEL SIGNUM Hatchback (Z03) 3.2 V6 (F48) (155kW / 211hp) 2003 - 2008
| Oxygen Sensor | Diagnostic Probe, Thread pre-greased |
| Fabrication Number | ESL-SK-000 |
$18,80
$22,10
-15%
ADD TO BASKET
| Length | 500mm |
| Number of connectors | 4 |
| Oxygen Sensor | Heated |
$20,60
$24,20
-15%
ADD TO BASKET
| Weight | 0.18kg |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Diagnostic Probe |
| Rated Resistance | 9Ohm |
| Overall Length | 540mm |
| Thread Size | M18X1, 5 |
$21,60
$25,30
-15%
ADD TO BASKET
| Length | 340mm |
| Number of connectors | 4 |
| Oxygen Sensor | Heated |
| Recommended change interval | 250, 000km |
$23,20
$27,30
-16%
ADD TO BASKET
| Number of pins | 4-pin connector |
| Oxygen Sensor | Planar Sensor, Regulating Sensor, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
$24,50
$28,80
-15%
ADD TO BASKET
| Length | 325mm |
| Number of connectors | 4 |
| Oxygen Sensor | Heated |
| Recommended change interval | 1, 600km |
$25,70
$30,20
-15%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 300mm |
| Length | 11.81Inch |
| Number of pins | 4-pin connector |
| Available as universal article as well, see article no. | OS-15P |
| Specification | Isolated Ground, Planar Type, Zirconia Type |
| Engine Code | Y32SE |
| More information » | |
$26,90
$31,70
-16%
ADD TO BASKET
| Oxygen Sensor | Switching-type Oxygen Sensor, Diagnostic Probe, Regulating Sensor |
| Voltage | 12V |
| Length | 290mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Weight | 0.09kg |
| Operating Mode | Electric |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
$30,60
$36,00
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor, Diagnostic Probe |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Block Separation | |
| Fitting Position | before catalytic converter, after catalytic converter |
$31,30
$36,80
-15%
ADD TO BASKET
| Oxygen Sensor | Planar Sensor |
| Cable Length | 549mm |
| Number of circuits | 4 |
| Fitting Position | Front, Front |
| Exhaust System | before catalytic converter, after catalytic converter |
| Block Separation | |
$32,80
$38,60
-16%
ADD TO BASKET
| Length | 400mm |
| Number of connectors | 4 |
| Exhaust System | Duplex (1 le./1 ri.) |
| Oxygen Sensor | Diagnostic Probe, Regulating Sensor |
$33,20
$39,10
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor, Diagnostic Probe |
| External Thread Size | M18 x 1, 5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 300mm |
| Weight | 0.116kg |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
| More information » | |
$34,40
$40,50
-16%
ADD TO BASKET
| Oxygen Sensor | Unheated, Diagnostic Probe |
| Number of pins | 4-pin connector |
| Cable Length | 520mm |
| Quality | OE EQUIVALENT |
| for OE No. | 025198484 |
| Quantity required | 2 |
$34,90
$41,00
-15%
ADD TO BASKET
| Resistor | 9Ohm |
| Conductor Number | 4conductor |
| Length | 275mm |
| Number of circuits | 4 |
| Cable Length | 275mm |
| Oxygen Sensor | Heated |
$36,20
$42,60
-16%
ADD TO BASKET
| Cable Length | 520mm |
| Oxygen Sensor | Planar Sensor, Heated, Regulating Sensor, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
$37,30
$43,80
-15%
ADD TO BASKET
| Cable Length | 300mm |
| Oxygen Sensor | Planar Sensor, Heated, Diagnostic Probe, Regulating Sensor |
| Block Separation | |
$40,70
$47,90
-16%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | OE |
| Weight | 93g |
| Gross Weight | 140g |
| Fitting Position | Left |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$42,60
$50,10
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor, Diagnostic Probe |
| Number of circuits | 4 |
| Supplementary Article/Info 2 | without plug |
| Block Separation | |
| Fitting Position | after catalytic converter, before catalytic converter |
$42,80
$50,30
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Length | 600mm |
| Engine Code | Z 32 SE |
$43,30
$50,90
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Overall Length | 300mm |
| Available as universal article as well, see article no. | 0258986615 |
| Recommended change interval | 160, 000km |
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
| More information » | |
$43,30
$50,90
-15%
ADD TO BASKET
| Cable Length | 350mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Heated, Regulating Sensor |
| Assy./disassy. by qualified personnel required! | |
| Fitting Position | before catalytic converter |
$45,00
$52,90
-15%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Length | 350mm |
| Thread Size | M18x1, 5mm |
| Resistor | 9Ohm |
| Overall Length | 300mm |
| Cable Length | 300mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Planar Sensor, Thread pre-greased, Regulating Sensor, Diagnostic Probe |
| Engine Code | Z 32 SE |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
| More information » | |
$50,30
$59,20
-16%
ADD TO BASKET
| Line insulation design | with silicone-coated woven-fibre insulation |
| Length | 270mm |
| Overall Length | 300mm |
| Cable Length | 300mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Thread pre-greased, Regulating Sensor, Diagnostic Probe |
| Engine Code | Z 32 SE |
| Fitting Position | before catalytic converter, after catalytic converter |
| More information » | |
$51,40
$60,50
-16%
ADD TO BASKET
| Oxygen Sensor | Heated |
| Conductor Number | 4conductor |
| Cable Length | 210mm |
| Engine Code | Z 32 SE |
| Fitting Position | before catalytic converter, after catalytic converter |
$51,70
$60,80
-15%
ADD TO BASKET
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor, Regulating Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 400mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 93186115, 855386 |
| Quality | OE |
| Weight | 83g |
| Gross Weight | 116g |
| Fitting Position | Left |
| Exhaust System | for pre-catalytic converter |
| More information » | |
$55,80
$65,60
-15%
ADD TO BASKET
| Length | 350mm |
| Techn. Info. No. | Universal 77015 |
| Oxygen Sensor | Regulating Sensor |
| Fitting Position | before catalytic converter |
$56,50
$66,40
-15%
ADD TO BASKET
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Oxygen Sensor | Regulating Sensor, Diagnostic Probe |
| Fitting Position | before catalytic converter, after catalytic converter |
| Block Separation | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
